Instruction/ maintenance manual of the product CG19 Eizo
Go to page of 68
SAFETY SYMBOLS PRECAUTIONS 1. INTRODUCTION 1-1.Features 1-2.Package Contents 1-3.Controls & Connectors 2. CABLE CONNECTION 2-1.Before Connecting 2-2.Connecting the Signal Cable (D-Sub or DVI) 2-3.Connecting the Signal Cable (ADC) 2-4.Connecting Two PCs to the Monitor 2-5.
8. SPECIFICATION 9. GLOSSARY APPENDIX/ ANHANG/ ANNEXE About TCO'03 (Applicable to gray) About TCO'99 (Applicable to black) FCC Declaration of Conformity Hinweis zur Ergonomie / Recycle Ausku.
This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage.
ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries. As an ENERGY STAR ® Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
IMPORTANT! ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications.
Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage.
To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet. * Do not place any objects on the ventilation slots. * Do not install the unit in a closed space. * Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen.
Thank you very much for choosing an EIZO Color Monitor . ● The exclusive use calibration software caliblates the monitor characteristics and generate colorprofile. ● Dual inputs compliant ● DVI Digital input ( TMDS ) compliant. ● ADC (Apple Display Connector) inputs compliant.
* LCD Monitor * User's Manual (in the CD-ROM) * Power Cord * Calibration software "ColorNavigator" (in the CD-ROM) * Signal Cable (FD-C35/FD-C39) * Setup Guide * Signal Cable (FD-C16) *.
(1) ScreenManager ® (2) Main Power Switch (3) Input Signal Selection Button (4) Mode Button *1 (5) Auto Adjustment Button (6) Enter Button (7) Control Buttons (Up, Down, Left, Right) *2 (8) Power But.
(10) Height Adjustable Stand (Detachable) *4 (11) Security Lock Slot *5 (12) DVI-I Input Connector (SIGNAL 1, SIGNAL 2) (13) USB Port (1 Upstream) (14) USB Port (2 Downstream) (15) Power Connector *4 The LCD monitor has the capability of the Portrait/Landscape display.
Before connecting your monitor to the PC, change the display screen settings ( resolution and frequency) in accordance with the charts below. * When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings.
Digital Input The monitor supports the following resolutions only. Resolution Frequency Dot Clock Remarks 640 x 480 60 Hz 108 MHz (Max.) VGA 720 x 400 70 Hz VGA TEXT 720 x 480 60 Hz VESA Safe Mode 800 x 600 60 Hz VESA 1024 x 768 60 Hz VESA 1280 x 1024 60 Hz VESA * Be sure that the power switches of both the PC and the monitor are OFF.
Signal Cable Connector PC Signal Cable (FD-C16 enclosed) Video Output Connector D-Sub 15 pin Input Connector (monitor) / DVI Standard graphics card Macintosh G3 (Blue & White) /Power Mac G4 (VGA) .
* The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/Landscape display. 4.Plug the other end of the power cord into a power outlet. The monitor's power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the standard power outlet of your country.
5.Turn on the monitor's power button and then switch on the PC's power. The monitor's power indicator will light up (blue). If an image does not appear, refer to the " 6. TROUBLESHOOTING " for advice. Whenever finished, turn off the PC and the monitor.
Signal Cable Connector PC Signal Cable (FD-C35/FD- C39 enclosed) +ADC-DVI display adapter (commercially available) Video Output Connector / ADC Input Connector (monitor) / DVI Power Mac G4 / G5 (ADC) * ADC-DVI display adapter is required if the monitor connects to Power Mac G4 / G5.
4.Plug the other end of the power cord into a power outlet. The monitor's power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord.
6.Change the input selection setting of the connector in the Input Selection menu to "ADC". Press Enter button to complete the setting and the menu closes. 7.Switch on the PC's power. The monitor's power indicator will light up (blue).
(EX.1) Digital ADC Signal Cable (FD- C35 / FD-C39 enclosed) +ADC- DVI display adapter (commercially available) Signal Cable (FD- C16 enclosed) D-Sub mini 15 pin Analog (EX.
Selecting the Active Input The Input Signal Selection button on the control panel can be used to select either SIGNAL 1 or SIGNAL 2 as the active input at any time.
Manual The monitor will not detect signals automatically in this mode. Select the active input by pressing the input signal selection button on the monitor's control panel. * When "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are in power saving mode.
1.Hold the center of the stand mounting cover and slide them rightward or leftward to remove the mounting cover. 2.Lay the LCD monitor down. Do not scratch the panel. 3.Remove the tilt stand by loosening the screws. (4 pcs of M4 x 15 mm) 4.Attach an arm stand to the LCD monitor securely.
ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. * Main Menu and FineContrast menu cannot be activated at the same time. 1.Entering the ScreenManager Press the Enter button once to display the main menu of the ScreenManager.
3.Exiting the ScreenManager (1) To return to the main menu, select the <Return> icon or press the Down button twice, followed by the Enter button. (2) To exit the ScreenManager, select <Exit> icon or press the Down button twice, followed by the Enter button.
Reset PowerManager DVI DMPM ** 4-4. Power-save Setup VESA DPMS * Others Screen Size 4-2.Displaying a low resolutions Border Intensity Input Priority Select the priority input signal. Off Timer Set the monitor's off timer to on or off. Beep Set the monitor's beeper to on or off.
This function allows you to select the best suited mode for screen display. To select the Mode Pressing the Mode button allows you to select the best suited mode for screen display from 3 FineContrast modes; Custom, sRGB and CAL. Color settings each mode can be adjusted by using the <Color> menu of the ScreenManager.
Color Adjustment of the Mode Settings <Brightness>, <Temperature> and <Gamma> settings can be ajusted on the FineContrast menu. Select the desired function icon with the Up/Down Control buttons and adjust with the Left/Right Control buttons.
Switch off the monitor's power by the power button on the front control panel, then hold Down the Auto Adjustment button once again and turn the power back on. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed.
Power Indicator setting Light off the power indicator. This function is available for the multiple panels settings. [Procedure] (1) Select <Power Indicator> in the ScreenManager <Others> menu.
(1) Select <Input Signal> in the <Others> menu. (2) Select <Manual>..
The monitor displays the digital input image correctly based on its pre-setting data. Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode.
2.Run the "Screen Adjustment Program". Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu screen of the CD-ROM.
(2) Horizontal bars appear on the screen. => Use the < Phase > adjustment. Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using the Right and Left buttons. * Horizontal bars may not completely disappear from the screen depending on the PC.
(4) Screen image is smaller or larger than the actual screen images. => Use the <Resolution> adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select <Resolution> and confirm if the resolution now being displayed is the same as the input resolution.
1.Enlarge the screen size when displaying a low resolution. => Select the <Screen Size>. Select the <Screen Size> in the others menu and select the screen size by using the Up and Down buttons. Menu Function Full Displays the picture on the screen in full, irrespective of the picture's resolution.
* <Smoothing> is disabled when the screen is displayed in the following resolutions. ● 1280 x 1024 ● The image size is doubled both in horizontally and vertially to (i.e. 1280 x 960 enlarged from 640 x 480) provide clear focus which does not require this function.
"*": Settable/Adjustable "-": Fixed at the factory Icons Functions FineContrast Modes sRGB Custom CAL Brightness** * * - Temperature** - * - Gamma** - * - Saturation - * - Hue - * - Gain - * - 6 colors - * - Reset - * - **These settings can be also adjusted on the FineContrast menu.
* The values shown in the Kelvin are available only as a reference tool. * Adjusting the <Gain> turns the <Temperature> adjustement "OFF". * Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature setting.
The <PowerManager> menu in the ScreenManager enables to set the power-save setup. * Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely.
Digital Input This monitor complies with the " DVI DMPM ". [Procedure] (1) Set the PC's power saving settings. (2) Select "DVI DMPM" from the <PowerManager> menu.
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub which the USB compliant peripherals can be easily connected. Required System Environment * PC equipped with USB ports or another USB hub connected to the USB compliant PC * Windows 98/2000/XP//Mac OS 8.
2.Connect the upstream port of the monitor to the downstream port of the USB compliant PC or another hub by using the USB cable. After connecting the USB cable, the USB function can be set up automatically. 3.After setting up, the monitor's USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor.
If a problem persists even after applying the suggested remedies, contact an EIZO dealer. ● No picture problems : See No.1 ~ No.2 ● Imaging problems : See No.3 ~ No.14 ● Other problems : See No.15 ~ No.18 ● USB problems : See No.19 ~ No.20 Problems Points to check with possible solutions 1.
Whenever an error signal message appears, the signal frequency will be displayed in red. (Example) [ ] Use the graphics board's utility software to change the frequency setting. (Refer to the manual of the graphics board.) 3. Display position is incorrect.
7. Horizontal bars of distortion appear. [ ] Decrease the horizontal bars using the < Phase >. 8. Letters and lines appear blurred. [ ] Adjust the blurred lines using < Smoothing >. 9. Distortion appears like the figure below. [ ] This happends when both composite (X-OR) input signal and separate vertical synchronizing signal are input.
15. The <Smoothing> cannot be selected. [ ] <Smoothing> is disabled when the screen is displayed in the 1280 x 1024. [ ] <Smoothing> is disabled when "Normal" is selected in the <Screen Size> menu. [ ] The image size is doubled both in horizontally and vertically to (i.
[ ] Try executing the following method. ● Restarting the PC - Restarting the PC ● Connecting the PC and peripherals directly If the problem is solved by doing this, contact an EIZO dealer.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. * Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel.
LCD Panel 48 cm (19.0 inch), TFT color LCD panel with Anti-Glare Hard Coating Viewing Angle: H: 170°, V: 170° (CR>10) Dot Pitch 0.294 mm Horizontal Scan Frequency Analog: 30 - 82 kHz (Automatic) .
Communication speed 480Mbps(high), 12 Mbps (full), 1.5 Mbps (low) Downstream power supply 500 mA for each (Max.) USB ports Upstream port x 1, Downstream port x 2 Certifications and Standards 100-120 V.
Beeper settings Short beep ScreenManager item selected. ScreenManager parameter adjusted to minimum or maximum limit. Input Signal Selection button pressed. Long beep Auto Adjustment button pressed. ScreenManager data-save executed. 4 short beeps Monitor not connected correctly.
Pin No. Signal Pin No. Signal Pin No. Signal 1 TMDS Data 2- 11 TMDS Data 1/3 Shield 21 NC 2 TMDS Data 2+ 12 NC 22 TMDS Clock Shield 3 TMDS Data 2/4 Shield 13 NC 23 TMDS Clock+ 4 NC* 14 +5V Power 24 TM.
Afterimage The Afterimage is particular to LCD monitors when the monitor screen is left on for a long period without use. The "Afterimage" can be removed gradually by changing the displayed image. Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry.
DVI (Digital Visual Interface) A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with the signal transition method "TMDS". There are two kinds of DVI connectors. One is DVI-D connector for digital signal input only.
Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen. Range Adjustment The Range Adjustment controls the level of output signal range to display the whole color gradation.
VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling) The acronym VESA stands for "Video Electronics Standards Association", and DPMS stands for "Display Power Management Signaling".
Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique Based on the signal diagram shown below 25 factory presets have been registered in the monitor's microprocessor.
VESA 640×480 31.5 MHz Nega Nega 37.5 75.0 VESA 640×480 36.0 MHz Nega Nega 43.3 85.0 VESA 800×600 36.0 MHz Posi Posi 35.2 56.3 VESA 800×600 40.0 MHz Posi Posi 37.9 60.3 VESA 800×600 50.0 MHz Posi Posi 48.1 72.2 VESA 800×600 49.5 MHz Posi Posi 46.
[Applicable to gray cabinet.] Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
❍ heavy metals such as cadium, mercury and lead. The requirements includes in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world.
.
Hinweis zur Ergonomie Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem Videosignal, 1280 Punkte X 1024 Zeilen, RGB analog, 0,7 Vp-p und mindestens 75,0 Hz Bildwiederholfrequenz, non interlaced.
Renseignements de recyclage pour les clients en Suisse: Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de l'UNION DE BRANC HE SWICO. http://www.swico.ch Recycling Information for customers in USA: All recycling information is placed in the Eizo Nanao Technologies, Inc.
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 - 150 cm beträgt. d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max.
An important point after buying a device Eizo CG19 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eizo CG19 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eizo CG19 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eizo CG19 you will learn all the available features of the product, as well as information on its operation. The information that you get Eizo CG19 will certainly help you make a decision on the purchase.
If you already are a holder of Eizo CG19, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eizo CG19.
However, one of the most important roles played by the user manual is to help in solving problems with Eizo CG19. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eizo CG19 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
