Instruction/ maintenance manual of the product LC-X71 Eiki
Go to page of 62
MUL TIMEDIA PR OJECT OR MODEL LC-X71 LC-X71L (Lensless) O WNER’S MANU AL.
2 CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCE The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC P ower Cord f or the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
5 T ABLE OF CONTENTS NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 POSITIONING PROJECTOR 9 LENS INSTALLATION 9 ADJUSTABLE FEET 10 INSTALLING PROJECTOR IN PROPER PO.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TTOM OF CABINET BA CK OF CABINET HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, the following precautions should be taken. ● Do not put a flammable object near this vent.
NO TE ON PO WER CORD AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and a proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
9 PREP ARA TION Before setting up the projector, install a projection lens on the projector. 1. Before installation, check the area where the projector is used and prepare a suitable lens. For the specifications of a projection lens, contact sales dealer where you purchased the projector.
10 PREP ARA TION ADJUST ABLE FEET Projection angle can be adjusted up to 10.5 degrees with the ADJUSTABLE FEET. Lift the front of the projector and pull the FEET LOCK LATCHES in each side of the projector. 1 Release the FEET LOCK LATCHES to lock the ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to a proper height, and tilt.
11 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING A PR OJECTOR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by courier or any other transport service in an unsuitable transport case.
12 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR This projector has input and output terminals on its back for connecting computers and video equipment. Refer to the figures on pages 12 to 14 and connect properly. Connect external speakers to these terminals.
13 CONNECTING PR OJECT OR S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG IN/OUT DIGITAL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H/V .
14 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT Video Source (Example) Video Cassette Recorder Video Disc Player S-VIDEO Cable ✽ Terminals of the Projector S-VIDEO Output Cables used f or connection ( ✽ = Cables not supplied with this projector.
15 BEFORE OPERA TION FOCUS BUTTON Used to adjust focus. (p.22) AUTO PC ADJ. BUTTON Use to operate the AUTO PC Adjustment function. (p.26) KEYSTONE BUTTON Used to correct keystone distortion. (p.22, 38) IMAGE BUTTON Used to select the image level. (p.29, 33) FREEZE F RE E Z E SELECT SELECT D.
16 BEFORE OPERA TION To insure safe operation, please observe following precautions: ● Use two (2) AA or LR6 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid.
17 BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close the On-Screen Menu. (p.18, 19) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select the image level.
18 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU You can control and adjust this projector with the On- Screen Menu. Refer to the relevant pages to operate each adjustment. 2. MOVING POINTER 3. SELECT ITEMS Move the pointer ( ✽ see below) or adjust a value of an item by pressing the POINT buttons on the top control or on the remote control.
19 BEFORE OPERA TION MENU B AR FOR PC SOURCE Press the MENU button when connecting to the PC input source. FOR VIDEO SOURCE Press the MENU button when connecting to the VIDEO input source. Same function as menu for PC source. Same function as menu for PC source.
20 B ASIC OPERA TION TURNING ON THE PR OJECT OR TURNING ON / OFF PR OJECT OR Connect the projector’s AC power cord into an AC outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. Press the POWER ON-OFF button on the top control or on the remote control.
21 B ASIC OPERA TION Press the POWER ON-OFF button on the top control or on the remote control, and “Power off?” appears on the screen. Press the POWER ON-OFF button again to turn off the projector. The LAMP Indicator lights bright and the READY Indicator turns off.
22 B ASIC OPERA TION ADJUSTING SCREEN “Zoom” disappears after 4 seconds. “Focus” disappears after 4 seconds. ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press the ZOOM button on the top control or ZOOM ▲ / ▼ buttons on the remote control. “Zoom” appears on the screen.
23 Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button.
24 SELECTING INPUT SOURCE WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. Press the POINT UP/DOWN buttons to move the red arrow pointer to Input 1 and then press the SELECT button.
25 COMPUTER INPUT SELECTING COMPUTER SYSTEM This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on pages 54-55).
26 COMPUTER INPUT PC ADJUSTMENT AU TO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Auto PC Adjustment function can be operated as follows.
27 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which may not be tuned by the Multi-Scan system of this projector.
28 COMPUTER INPUT Exit the PC ADJUST Menu. To store the adjusted parameters, move the red frame pointer to the Store icon and then press the SELECT button. Move the red arrow pointer to any of the Mode 1 to 10 in which you want to store the parameters and then press the SELECT button.
29 COMPUTER INPUT PICTURE IMA GE SELECT Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the desired level and then press the SELECT button.
30 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon.
31 When the video input signal is connected to the Y- Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. 1 Move the pointer to a source that you want to select and then press the SELECT button.
32 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press the MENU button to display the On-Screen Menu.
33 VIDEO INPUT PICTURE IMA GE SELECT Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the desired level and then press the SELECT button.
34 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon.
35 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon. 1 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the desired item and then press the SELECT button.
36 PICTURE IMA GE Auto picture control Press the POINT LEFT/RIGHT buttons to select the desired Auto picture control position (Off, L1 or L2). Off . . . . Auto picture control OFF position. L1 . . . . . Auto picture control LEVEL 1 position. L2 . . . .
37 Image Level Menu Move the red frame pointer to any of Image 1 to 10 where you want to set and then press the SELECT button. Store icon Press the SELECT button at this icon to store the adjustment. PICTURE IMA GE Press the SELECT button at this icon to display other items.
38 Keystone Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese.
39 SETTING This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions. Logo This function prevents an unauthorized person from changing the Logo setting. Off . . . . the Logo setting can be changed freely from the Logo function.
40 SETTING Ceiling Rear Ceiling When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling- mounted projector. Rear When this function is “On,” the picture is left/right reversed.
41 Lamp control This function allows you to change the brightness of the screen. . . . . brightness according to the input signal. . . . . normal brightness.
42 SETTING This Projector has a USB port for interactive operation between the projector and computers. Set the mode by following the steps below. Wireless Mouse mode Select “ ” when controlling a computer with the remote control of this projector.
43 SETTING The PIN code can be changed to your desired four-digit number. Select “PIN code change” with the POINT DOWN button, and press the SELECT button. A New PIN code input dialog box appears. Select a number with the POINT LEFT/RIGHT buttons and fix the number with the SELECT button.
44 This function is used to reset the Lamp replacement counter. When replacing the projection lamp, reset the Lamp replacement counter with this function.
45 WIRELESS MOUSE INST ALLA TION Remote control is not only able to operate this projector but also functions as a wireless mouse for most personal computers. The MOUSE POINTER, DRAG ON/OFF button, and two CLICK buttons are used for wireless mouse operation.
46 MAINTENANCE W ARNING TEMP . INDICA T OR The Warning Temp. indicator blinks red to let you know the internal temperature of the projector exceeds a normal level. If the temperature goes up further, the projector will be turned off automatically and the Ready indicator goes out.
47 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a dry soft cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents ,or other harsh chemicals might scratch the surface of the lens. When the projector is not in use, put the lens cap.
48 APPENDIX Turn off the projector and unplug the AC power cord. Allow the projector to cool for at least 45 minutes. Loosen the two (2) screws with a screwdriver and pull out the lamp assembly by using the built in handle. 1 3 Replace the lamp assembly with a new one and tighten the two (2) screws.
49 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp replacement counter after the lamp assembly is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting. NOTE: • Do not reset the Lamp replacement counter until after the projection lamp is replaced.
50 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have connected the projector to your computer or video equipment as described in “CONNECTING PROJECTOR” on pages 12-14.
51 APPENDIX This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty, and electrical hazards. The CE Mark is a Directive conformity mark of the European Community (EC).
52 APPENDIX Computer Input MENU TREE Input RGB (PC analog) Go to System (1) Input 1 Y, Pb/Cb, Pr/Cr Computer Input/Video Input RGB (Scart) RGB (PC digital) RGB (AV HDCP) Monitor out Video RGB Go to Sy.
53 APPENDIX Video Input System (2) Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N System (3) Auto 1080i 1035i 720p 575p 480p 575i 480i Image Select Standard Cinema Image 1 Image 10 Screen Normal Wide Computer Input/Vide Input Image Adjust Contrast Brightness Color Tint Color management Auto picture control Color temp.
54 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.
55 APPENDIX NOTE: Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 720 x 480 ( Progressive ) 31.47 59.88 D-575p 768 x 575 ( Progressive ) 31.25 50.00 D-SVGA 800 x 600 37.
56 APPENDIX • • • on • • • dim • • • off • • • flashing * When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly.
57 APPENDIX TECHNICAL SPECIFICA TIONS Owner’s Manual (CD-ROM) Quick Reference Guide AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries VGA Cable USB Cable Control Cable for Serial Port Lens Cap (LC-X71) Lens Attachment Lens Replacement And Installation Manual PIN Code Label Multi-media Projector Accessories 1.
58 CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 TERMINALS (ANALOG) Terminal: HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz.
59 APPENDIX OPTIONAL P ARTS The parts listed below are optionally supplied. When ordering those parts, specify the item name and its Type No. to the sales dealer. ● DVI Cable Type No. : KA-DV20 ● HDB 15 pin-SCART 21 pin Cable Type No. : AH-98881 ● Long Zoom Lens Type No.
60 Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to use the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four-digit number be changed, the factory set number will be invalid.
61 DIMENSIONS APPENDIX 2.39 (60.6) 10.5° 17.1 (435.5) 5.57 (141.5) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 9.06 (230.0) 5.28 (134.0) 4.49 (114.0) 4.55 (115.5) 4.61 (117.0) 3.74 (95.0) 5.79 (147.0) Unit : inch (mm) 12.6 (319.0) 6.72 (170.
A-key to better communications U .S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.
An important point after buying a device Eiki LC-X71 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eiki LC-X71 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eiki LC-X71 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eiki LC-X71 you will learn all the available features of the product, as well as information on its operation. The information that you get Eiki LC-X71 will certainly help you make a decision on the purchase.
If you already are a holder of Eiki LC-X71, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eiki LC-X71.
However, one of the most important roles played by the user manual is to help in solving problems with Eiki LC-X71. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eiki LC-X71 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
