Instruction/ maintenance manual of the product S-5 Ednet
Go to page of 5
Strip-Cut Shredder S5 Manual 91604.
- 2 - Please carefully read thr ough thes e operating i nstructio ns before using the device for the first t ime. In partic ular, please c omply with the safety notices . Intended Use: The shredder is only suitable for s hredding of paper. Any other use or modification shall be deemed to be improper and involves substantial risk of accidents .
- 3 - 9. Never open the casing to avoid serious injuries, in the event of problems, please consult the vendor location, where you purchased this device or our hotline. 10. The device may not be operated wi th a damaged power cord to avoid ele ctric shock or short c ircuit.
- 4 - 2. REV position: Rectifying a paper jam. In this case, the direction of the shredding operation is reversed before the work cycle ends in order t o free the shredding blades.
- 5 - 3. With the switch in the AUTO position and the open f eed slot, you may now continue the normal shredding process. Technical data: Shredding type: Strip-cut Size of cut: 7 mm (paper) Shredding capacity: 5 pages DIN A4 (80g) Feed width: 218 mm Input voltage: 230-240 volt alternating current, 50 Hz , 0.
An important point after buying a device Ednet S-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ednet S-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ednet S-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ednet S-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Ednet S-5 will certainly help you make a decision on the purchase.
If you already are a holder of Ednet S-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ednet S-5.
However, one of the most important roles played by the user manual is to help in solving problems with Ednet S-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ednet S-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
