Instruction/ maintenance manual of the product PS-1206P Edimax
Go to page of 159
Print Server Series PS-1207U/PS-1208UWg PS-1206U/PS-1206UWg PS-1206P/PS-1206PWg PS-3207U/PS-3207UWg User’s Manual Version: 3.0 (July, 2007).
COPYRIGHT Copyright © 2007/2008 by this comp any. All ri ghts reserved. No part of this publication may be reprod uced, transmitted, transcri bed, stored in a retrieval system, or translated into any.
Federal Communication Commission Interference Stateme nt This equipment has been tested and found to comp ly with the limits for a Class B di gital devi ce, pursuant t o Part 15 of FCC Rules. These limits are designed to provide reas onable protection against harmful interference in a residen tial installation.
FCC Caution This equipment must be installed and operated in accordance with provided instructions and a mi nimum 20 cm sp acing must be provided between comp uter mounted antenn a and person’s body (excluding extremities of hands, wris t and feet) during wireless modes of operation.
Safety This equipment is design ed with the utmost ca re for the safety of those who install and use it. Howeve r, special attention must be paid to the dangers of electric shock a nd static electricity when working with electrical equipment.
DISCLAIMER This company makes no represen tations or warranti es, either expressed or implied, with resp ect to the contents hereof and specifically disclaims any warrantie s, merchantabili t y or fitness for any particular purpose. Any software described in this manual is sold or licensed "as is".
Contents 1. Introduction ........................ ........................ ....................... ................. 1 1.1 Product Introducti on .............................................. ........... 1 1.2 Product Package ...................... ..
6. UNIX System Network ... .................................................................. 52 6.1 Introduction ........ ....................... ........................ ............. 52 6.2 Enable Print Server’s TCP/IP Suppor t ..................
8. Web Management ............. ........................ ...................................... 89 8.1 Introduction ........ ....................... ........................ ............. 89 8.2 Login ...................... ...........................
10. LPR Printing ..................... ........................ .................................... 123 10.1 Introduction .......... ........................ .............................. 123 10.2 Standard LPR Settings in Windows XP ................
1 1. Introduction 1.1 Product Introduction Thank you for purchasing and us ing our print server. This print server allo ws your printe r to become a shared devi ce on the network. It offers printing flexibilit y and manageabilit y on your Local Area N etwork at an e xtremely low cost and with an abs olute minimum setup and maintenance required.
2 1.2 Product Package This package contains th e following components: One Print Server One Antenna One Power Adapter One Quick Installation G uide One CD-ROM (Inc luding all the s.
3 1.3 Network Printing Architecture This sectio n illustrates how print serve r functions and operates on the network. Befo re you instal l and use print server, it is strongly reco mmended that you r.
4 1.3.1 Print Ser ver Network Functions W indow s N T S er v e r NetWare Server W indow s 98 Wi ndow s NT Wo rkstation W indow s 2000 Unix Print S erv er Print S erver Because print server supports IP.
5 1.3.2 Network Printi ng Functions for Clients Window s NT S erv er NetWare Server Windo ws 98 Windo ws NT Wo rkstatio n W indows 2000 Uni x Print S erv er Client Us er Common operating sy stems for .
6 In the clien t installat ion procedure, after PTPP (Peer- to- Peer Prin ting Driver) is insta lled into Windows, the system will automa tically (manua l configurat ion is also allow ed) search all the print servers on the network, and then add their printing ports in to Windows’ printing port (see below).
7 1.3.3 Network Printing Fu nctions for Net work Server Windo w s NT Ser ver NetWare Serv er Windo w s 98 Windo w s NT W orkst ation W indow s 2000 Uni x Print S er ve r Network Server Common networ k.
8 1.4 Network Printing Environment Common network environm ent are classifi ed as following: Windows Peer-to-Peer Network The client’s PTPP driv er will us e TCP/I P protocol to p rint through print server.
9 Windows NT/2000/2003 Network Network printing function wi ll become available after PTPP driver is installed into Windows NT/2000/2003. Adding this printing functi on into Windows NT/2000/2003 Server allows prin t queue, user auth ority management, and many other advanced features to be used.
10 1.5 Contents of the User’s Manual Chapter 2. explains pri nt server’s har dware installati on and configuration. It is stro ngly recommended for you to read. The following chap ters introduce: Chapter 3. Windows Peer-to-Peer Network Chapter 4. Windows NT/2000/2003 Server-Based Network Chapter 5.
11 Chapter 10. introduc es Print Se rver’s LPR Printing function and Windows XP/ Vista and MAC OS 10.x standard setup procedures. T he LPR Printing (Line Pr inter Remote technology) all ows us ers to connect to printers via TCP/IP for pr inting sharing.
12 2. Hardware Inst allation Unpack the print server pack age and verify that all the items listed in the sect ion 1.2 are provided. Connect the print server to th e printer you want to share on the network. Connect the print server to yo ur network by attached the network cable to the UTP po rt of the pri nt server.
13 3. Windows Peer-to-Peer Network 3.1 System Architecture Print server supports Win dows Peer -to-Peer network printing mode, which is suitable f or most medium and small network environments. Through quick and simple installation procedure, user s can immediately enjoy the convenience of network printing.
14 Installation procedur e is sepa rated into follo wing two parts: 1. Administrator Install ation and Setup (refer to section 2 for more detailed i nformation). System administrators m ust: Install administrato r’s utilities into his/her computer. Configure print server from administrator’s configuration uti lity.
15 3.2 EZMax Inst allation Wizard This wizard can be run in Windows 2000/XP/Vista. The following procedures are operated in Windows XP. You can install the Prin t Server by EZMAX Setu p Wizard in the CD- ROM including in the packag e. Th e wizard is an easy and quick configuration tool for in ternet connection with s eries process.
16 3.3 Administrator Installation and Setup **Please find the utility man ually fr om CD-ROM drive’s root directory or download it from Edimax webist e.
17 2. The “Prin t Server Utilities” win dow will be d isplayed. Click “Next”. 3. Click “Next” t o install the ut ilities in the default folder or click “Change” to specify th e destination folder where you would like to in stall the utiliti es.
18 4. Select the components you wa nt to install. It is highly recommended to inst all all provided components. Clic k “Next” to continue. 5. Click “I nstall”.
19 6. The system will sta rt to install the utilities a utomatically. 7. You have completed the in stall ation phase and prepare to configure the Print Server . The “Choose Print Server” will list all Print Servers with in the network. Select the Print Server you would like to c onfigure and cl ick “Next”.
20 NOTE 1: If this is the first time you conf igure the Print Server, the “Print Server Name” is the last 6- digi t of MAC ID with prefix “PS”. Please check the MAC ID on the print server. NOTE 2: The list can only display the devices from Ediamx.
21 9. Specify the IP Ad dress for the Print Se rver manually or click “Next” to keep default IP Address, i.e. 192.168.2.2. 10. The configuration summary i s displayed in the window. Now, you have co mpleted the Print Server setup. Click “F inish” and your system will add network port of the Prin t Server to y our PC automatically.
22 11. The Administrator Inst allation procedure is totally completed. Click “Finish”. The Admini strator Installation Program have executed the installation procedure that performs the fol lowing tasks: Install all utilities and driver s to the administrator’s PC.
23 3.3 Administrator Utilities 1. After Administrato r Installat ion is completed, there w ill be four ut ilities in pr int server’s Program fo lder. Network Ports Quick Setup – Add the network ports of print servers within the network to your PC.
24 3.4 Client In stallation and Setup *Please find the utility manuall y from CD-ROM dri ve’s root di rectory or download it from Edimax webist e. If you have an y question please check with Edimax local technical support team.
25 2. The “Prin t Server Utilities” win dow will be d isplayed. Click “Next”. 3. Click “Next” t o install the ut ilities in the default folder or click “Change” to specify th e destination folder where you would like to in stall the utiliti es.
26 4. Click “I nstall” 5. The system will sta rt to install the utilities a utomatically..
27 6. Now, the installation proc edure is completed, you are ready to set up the client’s computer. All network ports of the Print Servers de tected on the netwo rk will be added to your PC automatically, click “C ontinue”.
28 7. The Client Installati on pr ocedure is completed. Click “Finish”. After the inst allation, you have complete d the following tasks: Install all utilities and driv ers to the client’s PC. Add all th e print serv er’s network ports of the network to the client’s PC.
29 3.5 Client Utilities 1. After Client Installation is comple ted, there will be three tools in pr int server’s Progr am folder. Network Ports Quick Setup Remote Ports Uninstall Netw ork Driver The Unin stall Netw ork Driv er will assist you in removing all insta lled clie nt software.
30 3.5.1 Networ k Ports Quick Setup Network Ports Quick Setup Utilit y offers a very s imple method to add or re move print server’s printer po rt from the client’s computer.
31 If you have just in stalled another new print server in the network, you must run this progr am first. This program will search for new print servers and allow you to add the new network print er port into cli ent’s computer c onveniently.
32 3.5.2 Remote Ports (Utility ) 1. Remote Ports Utility offers a conv enient way for you to manage and add printe r port o f the remo te print server. From the assist ant of this ut ility, you can print to other print servers outside the subnet across netw ork segment.
33 Step3. The new remote prin t po rt is displa yed as follows. In order to use th e remote pr int ing function, you will have to proceed with normal Add Printer procedure and select your printer port as the newl y added remote pri nter port.
34 3.6 Windows Add Printer Procedure After adding a “Network Port” of the print server to your PC by Administr ator or Client I nstallation Progr am, you can follow the pr ocedures described in t he following sections to add printer to the Windows.
35 5. Choose the suitable printe r port which was created by the installation pr ocess and click “Next”. 6. Select the printer manufa cturer and the printer model and click “Next”. If your prin ter is not in the list, click “Have Disk…” to install the dr iver of the printer.
36 7. Name your prin ter and set the default printer , click “Next” . 8. The printer drivers are being installed..
37 9. It is recommende d to print a test page. Click “Finish”. 10. The printer is added to “Printers” page, y ou have added the printer to your computer su ccessfully.
38 3.6.2 Windows XP 1. The following “Add Printe r” steps are running in Windows XP, the steps i n other Operating Sy stems such as Windows 98SE/Me/2000 are similar. 2. Click “Start”, choose “Set tings” and select “Printers and Faxes”.
39 5. Select “Local pri nter atta ched to this computer” and make sure that “Automati c ally detect an d in stall my Plug and Play printer” is not select ed. Click “Next”. 6. Choose the suitable “Print Server Network Port” which was created by the Administra tor Installation or Client Installation process and click “Next”.
40 7. Select a suitabl e printer manufacturer an d the printer model and click “Next” . If your printer is not in the list, click “Have Di sk…” to install the driver of the printer. After insta llation, the pr inter model will b e added to the list.
41 9. Choose to print the test pa ge or not. It is r ecommended to print a test page. Click “Next”. 10. You have added the printe r to the PC su ccessfu lly. The information of the prin ter is displayed in the windows. Click “Fin ish”. 11. Now you can start to print from your PC to the print server.
42 4. Windows NT/2000/2003 Network 4.1 System Architecture In Windows network environmen t, other than the Peer-to- Peer network printing arch itecture descr ibed in the previous chapter, we also of fer the Server-Based Printing architecture f or Windows NT /2000/2003 server.
43 4.2 Windows NT/2000/2003 Server Installation and Setup Please follow the procedur es described below for installation and construct a peer-to-peer connection (PTPP) between Windows NT /2 000/2003 Server and Print Server.
44 Step2. Please add/configure the Pee r-to-Peer Printing of the Windows NT/2000/2003 network printer and ver ify that you can print from Wind ows NT/2000/2003 to the print server by the inst alled PTPP driv er. Step3. Share the above server’s prin ter to the network by performing the standard Windo ws printer sharing process.
45 4.3 User Installation and Setup After server side’s installation is co mpleted, clie nt side will be able to f ind the server’s shared p rinter in Netw ork Neighborhood.
46 5. NetW are Network 5.1 System Architecture We implement NetWare printe r sharing func tionality into the print server itself, thus allowing one or more printers attached by a print server to be connected to the network. We have developed the pri nt server to support N etWare print server.
47 Compare wi th NetWare prin ti ng functionality, the advantages of embedding th e NetWare network printing functionality in the pr int server include: 1. Installation i s easier and quicker. 2. Network manage ment is easier. 3. Printing performance is enhanced.
48 5.2 NetWare 3.x/4.x/5.x Installation & Setup Once your print server i s connected to yo ur Ethernet network, you can set it up fo r use with your networking software. 5.2.1 Installati on Using PCONSOLE 5.2.1.1 Configuring as Print Server Mode 1.
49 6. You have now successf ully created th e print queue that your print server will serve. Press the Escape key until the Available Options ma in menu is displayed. 7. Select Print Server Information. 8. Press the In sert key to add a new NetWare pri nt server object.
50 12. Select Printer 0 (or Pr inter 1, Printer 2), and press Enter, then select LPT1 (o r LPT2, LP T3) in the Type field. If your print server is with only one port, you do not need to configur e this Type field. 13. Press Escape, and answ er Yes to the Save Changes question.
51 15. Press Insert and add your newly cr eated print queue to the list of queues servic ed by the printe r. Ente r a priority number for the queu e service, or press Enter to accept the default. 16. Repeatedly p ress Esca pe to exit the PCONSOLE program.
52 6. UNIX System Network 6.1 Introduction The print server is available for TCP/IP printing by Unix LPD (Line Printer Daemon) pr otocol . The LPD protocol originated with Unix rel ease is based on the BSD v ersion of Unix and supported unde r mos t versions of Unix.
53 6.2 Enable Print Server’s TCP /IP Support The default configuration of the print server i s with TCP/IP support enabled. Anyway, yo u can configur e the pr int server to enable TCP/IP supp ort using the confi guration program.
54 6.3.2 BOOTP If you have the B OOTP da emon, bootpd, running on your UNIX system that is ac cessible b y t he print server, you can use the BOOTP protocol to set up the IP address of the print serv er. We recomme nd that the BOOTP server should be located on the s ame subnet as the print server.
55 Lines should be indent ed with tabs. Where hostname is the device name of a pr int server, the ht=1 tag specifies the hardware type is Ethernet, the ha= tag specifies the Ethernet addr ess of a print server, which is the Node ID lo cated on the pr int server.
56 6.4 Verify Print Server’s IP Address To verify that your print serv er is responding to the newly assigned IP address us ing a PING command: ping ip-address 6.
57 1. Optionally, assign a nam e corresponding t o the print server ’ s IP address. Y ou can add this address to the /etc/hosts file, by adding a li ne such as: 203.
58 Lines should be i ndented with tabs. More than one printer name can be used, with varian ts separated by vertical bars (name1|name2). The rm= entry should corresp ond to the IP address you have assigned to the print serv er. You can also use a host name if you have assigned on e in the /etc/hosts file.
59 7. Configuration Utility 7.1 Introduction This chapter introduces print server’s system configuration utility in Win dows environment . This utility is automatically i nstalled during Wi ndows Administrator Utility installa tion procedure - refer to section 3.
60 SNMP Configuration : SNMP Information Configuration. SMB : Configure the SMB Group Name. System Configuration : Print Server Network Abilit y Setting and Firmware Upgrade. Wireless Configuration : Wireless LAN Configuration. Setup Wizard : Guide You Through All the Settings.
61 7.2 Search for A ll Available Print Ser ver Every time when you run print server’s conf iguration utility, click the “Search” icon on the tool bar. The configuration utility will delay f or several seconds because the utility is us ing system’s av ailab le netw ork protocol s to search for all print servers on the netw ork.
62 7.3 Status of Print S erver Click “Status” ic on on the tool bar, the status of the current se lected print server will be showe d on the right side of the wi ndow.
63 You can restart the print server by pr essing the “Reboot” button . 7.4 Setup the Print Server Click “Setup” i con on the tool bar, the setup items of the current selected print server w ill be showed o n the right side of the window. Double click one of the icons to se t up the se lected p rint server.
64 7.5 General Configuration Double Click “General” icon and the General configurati on window will pop-up. You can see basic print server informati on in this page. You also can confi gure the “Serv er Name”, “U ser Name” and “Password” here.
65 User Name / Password is used to authenticate the administrator by the W eb administration tool. 7.6 TCP/IP Configuration Double Click “TCP/IP ” icon and the TCP/IP configuration window will pop-up.
66 You can configure the print server to automatical ly get IP from DHCP server or ma nually specify static IP. The print server also has a built-i n DHCP server. You can enable this DHCP server and let it manages I P for you. Click the “IP” button to ente r the IP setting page.
67 7.7 Netware Print Server Configuration Double Click “ NetWare” icon and the NetWare configuration wi ndow will pop-up. This print server supports NetWare Binder y Printing method. The print se rver periodically poll s the NetWare server printer queues for printing jobs .
68 7.8 AppleTalk Configuration Double Click “AppleTalk” icon and the AppleTalk configuration wi ndow will pop-up. AppleTalk is a data comm unicati on protocol often used by Macintoshes. The pr int server can use thes e parameters to join the AppleTalk net wor k and share the printer to other AppleTalk wor kstations .
69 7.9 SNMP Configuration Double Click “SNMP” icon and the SNMP configuration window will pop up. Contact: You can enter the print server administrator’s contact information here. Th is information w ill be displayed in the SNMP management tool.
70 7.10 SMB Configuration SMB Group Name , the name of SMB group that this print server belong s to. All PC shou ld join the sa me group before they can use this pr int server by S MB protocol.
71 7.11 System Configuration Double Click “System” icon and the System configuration window will pop-up. In the System configuratio n page, you ca n select to enable/disable each printing or manag.
72 Note that before you upgrade the firmware please make sure that the IP Address setti n gs of the print server are in the same network as your computer. Load Default: If you want to rese t the Print Server to default factory sett ings, please click “Load Default”.
73 Domain Country: The wireless channel s are different from country to country. Gener ally, the channels are from 1 to 11 in USA and from 1 to 13 in Europe . The operating channel will b e set to the pr int server befor e import ing. If you are in different country, please make su re you have set the available channels a ccording to your location.
74 Double Click “Wireless” icon and the w ireless configuration wi ndow will pop-up. If you use access point to bu ild up wireless net work, you have to select “Inf rastruct ure Mode”. If you do not have any access point and want to use peer-t o-peer connection to build up wireless network, you have t o select “Ad-Hoc Mode”.
75 Users can plug the Ethernet cable to the print server at the first, after configuring the print serv er features and wi rele ss settings; they can unplug the Ethernet cable to enabl e the wireless connection. It makes the configuration much easier wi thout creating the wireless connection in adva nce.
76 In the Infrastructure mode, you have to let the print server associate with an acc ess po int. You let the print server scan for an avail able access point automatical ly or manually assign the SS ID of the access point you want to use. If you select to let the print serv er scan for an available access point, the following windo w will pop u p.
77 Ad Hoc Mode: In the Ad-Hoc mode, you can let the print s erver automatically associate with other wireless station or manually assign the SSID of your wireless network. You can let the print server auto matically se lect the channel that is the same with the peer or manually assign a channel.
78 The list is the scann ed active wirele ss station s. Select a wireless st ation in the list a n d click “Next”. If you cannot find the wireless st ation that you want the print server to communicate with, click “S can” to let the print server scan again.
79 This print server supports WEP and WPA-PSK security mode. If you want to use WEP encrypti on to protect your wireless net work, you have to selec t “WEP (ASC II)” or “WEP(HEX)”. If you want to use WPA-PSK, you have to select “WPA-shared key” or “WPA-None” specified for Ad Hoc mode.
80 You can se lect “64 bit” or “128 bit” length and “Hexadecimal” or “ASCII” form at for the encryption key. Longer key length can provide stronger security but worth communication perfo rmance. Enter four key values by fo ll owing the rules bel ow and select one key as the default key.
81 WPA-shared key or WPA- None Security Mode: “WPA-shared key” (for an in frastructure netw ork) or “WPA-None” (enables WPA se curity for your ad hoc network) requires users to set the advanced encryption methods, i.e. TKIP and enter a set of shared key.
82 TKIP – TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets. This insu res much greater security than the standard WEP security. Shared Key – Enter 8 to 63 digits of ASCII form at to be the key for the authentication within the network.
83 Click “Sav e” to save the wireless config uration. 7.12 Wizard.
84 Click “Wizard” icon on the tool bar, the setup wizard item of the current s elected pr int server will be showed on the right side of the window. Double click the “Print Serv er Setup Wizard” the setup wizard will gui de you thro ugh all the setup process.
85 Step 2: Select to enable requi red printi ng protocol. Please refer t o section 7.11 f o r detail information. Step 3: Setup the IP of th is print server and the DHCP server .
86 Step 4: Setup the AppleTal k printing. Please refer to section 7.8 f or detail infor mation. Step 5: Setup the NetWare printing. Please r efer to section 7.
87 Step 6: Select th e Wireless Adapter mode and complete wireless LAN settings. Th e other procedures are the same with “Wireles s” Setting in “Setup” screen. Please ref er to section 7.12 for detail information. Step 7: Click “Save” t o finish setting.
88 7.13 Report Click “Report” icon on the tool bar, the Report window will pop up. The report lists basic inform ation of all avai lable print servers on the network . The infor mation includes Device Name, MAC ID, Model Type an d Firmware Versi on of the print server.
89 8. W eb Management 8.1 Introduction Print server can be configured and m anaged on the Web. Through Local Area Network, or even Internet, administrator can easi ly co nfigure and manage print server’s various main function s in browsers.
90 8.2 Login You may use any Web Browser to review the status or configure the settings of the print server. A fter entering the IP address of th e print server, a l ogin page display. You have to enter correct “User Name” a nd “Password” before going to the Web Management pages.
91 8.3 Device Status 8.3.1 Sy stem System Information includes “D evice Name”, “Print Server Name”, “Model Type”, “Firm w are Version”, “MAC Addres s”, “Wireless LAN Configuration” and the protocols enabled status, etc.
92 8.3.2 Printer This page lists information of printers connected to all printer ports..
93 8.3.3 TCP/IP This page lists all TCP/IP se ttings of the print server including “IP Address”, “Subnet Mask” and “Gateway” . It also lists DHCP server settin g.
94 8.3.4 SMB This page lists the SMB group and the pass job interval time settings of the print server..
95 8.3.5 SNMP This page lists the SNMP settin gs of the print server. It includes the settings of “S NMP System Contact” and “SNMP System Location” .
96 8.3.6 NetWare This page lists NetWare setting s, including “Polling Tim e”, “Use Bindery Mode”, “Name of the File Server” and “Port Attached Queue”.
97 8.3.7 AppleTalk This page lists AppleTalk sett ings, including “AppleTalk Zone Name” and “Printer Type ” of printers connected to all print ports.
98 8.4 Setup Wizard 8.4.1 Sy stem You can change the print serv er name and password of the print ser ver from here. Print Server Name , the name of the pr int server. You can use this name to i dentify th e print server when you are searching for the print server by the administration and client utilitie s.
99 Password, enter the password you want to chan ge to the print server. The password ca n be up to 7-digit alphanumeric format. The de faul t password is “1234”. Re-type Password, enter the passwor d you want to change to the pr int server again.
100 8.4.2 Wireless If you want to use the print server thr ough wireless LAN, please set up the print server through Ethernet first and make sure you r wireless LA N setting is correct. After setting the wireless LAN, unp lug the Ethernet cable and restart the print serv er, then you can star t to use the print server through wireless LA N.
101 You can enable/disab le the w irele ss function and set parameters that ar e used for the wireless stations to connect to this print server from here.
102 Enable – Enable wirele ss function only, the print server ’s wireless LAN will be always enabled and Et hernet will be always disabled. Disable – Disable the wireless func tion, the print server’s wireless LAN will be always disabled an d Ethernet will be always enabled.
103 8.4.2.2 Encryptio n This print server supports WEP and WPA-PSK security mode. If you want to use WEP encrypti on to protect your wireless net work, you have to select “WEP”. If you want to use WPA-PSK, you have to select “WP A-PSK” (for an infrastructure network or “WPA-NONE” (enables WPA security for an ad hoc netw ork).
104 Key Length – You can choose “64-bi t” to use WEP with 64-bit key length encryption or choose “128-bit” to use WEP with 128-bit key length encryption. The l onger key le ngth can provide better security but worse transmissi on throughput.
105 WPA-PSK or WPA-NONE Security Mode: “WPA-shared key” (for an in frastructure netw ork) or “WPA-None” (enables WPA se curity for your ad hoc network) requires users to set the advanced encryption methods, i.e. TKIP and enter a set of shared key.
106 WPA Pre-Shared Key – Enter 8 to 63 di gits of ASCII fo rmat to be the key for the authenticatio n within the network. When you fin ish co nfiguring the wirele ss security, click “Save & Next” to confir m the config ur ation.
107 You can use this “Site Survey ” function to search for available ac cess points in you locati on. In the list i s the information of al l available access point s or wireless stations, includes SSID , BSSID, Channel, Type, Encryption and Si gnal Stre ngth.
108 8.4.3 TCP/IP You can configure the print server to automatical ly get IP from DHCP server or ma nually specify static IP. The print server also has a built-i n DHCP server.
109 You can enable/disable or set auto for the print s erver’s DHCP server. The DHCP server is disabled by default. If the DHCP Server is enabled or set Auto, you have to assign a range of IP addresses he re.
110 You can enable/disab le the SMB protocol from here. If SMB is enabled, enter the “S MB Group Name” to specify the SMB group that this p rint server belongs t o. All PC should join the same group bef ore they can use this print server by SMB protocol.
111 The print server supports SNMP configuration. If it is enabled, please set up th e followi ng parameters. SNMP System Contact: You can enter the print server administrator’s contact inform ation here. This inf o rmation will be displayed in the SNMP manag ement tool.
112 This print server supports NetWare Binder y Printing method. The print se rver periodically poll s the NetWare server printer queues for printing jobs . Yo u have to assign the NetWare server name, prin t server polling interv al and the name of queue on the NetWar e server for each printer port.
113 8.4.7 AppleTalk AppleTalk is a data comm unicati on protocol often used by Macintoshes. The pr int server can use thes e parameters to join the AppleTalk net wor k and share the printer to other AppleTalk wor kstations .
114 AppleTalk Zone Name : Print server has to join zones of AppleTalk before it can be sh ared to other workstations. Only wor kstations in the same zone can share the printer. If you want to shar e the printer to all workstations in all Zones, you should enter only “* ” in the “Zone Name” field.
115 8.5 System Tools 8.5.1 Load Default You can use this page to restore the factory default settings. All of your previous setup will be cleared..
116 8.5.2 Upgrade Firmw are from Browser You can upgrade new firmware fo r this print se rver in this page. Click “Browse” to select the new firmware in your storage and then click “OK”, the firmwa re will be upda ted in several min utes.
117 9. IPP Printing 9.1 Introduction IPP (Internet Pri nting Protocol) Pri nting provides a convenient way of remote prin ting ser vice by TCP/IP. Th e print serv er can sup port IPP printing by default. It is needless to do any setting. Any PC that can support IPP printing, for example Wi ndows 2000/XP, can di rectly uses the print serv er by IP.
118 9.2.2 Client Side You only need to perfor m Window’ s standard Add New Printer procedure. Step1. Click “Start”, choose “Settings” and select “Printer s and Faxes”. Step2. Click “A dd a Printer”. Step3. The “Add Printer Wizard ” is displayed.
119 Step4. Select “A network pri nte r, or a printe r attached to another computer”. Cli ck “Next”..
120 Step5. Select “Connect to a prin ter on the Inte rnet or on a home or office networ k” an d enter the URL of print server. The URL format is “http://IP:631/Por t Name”. The IP should be the print serv er’s IP. The number 631 is IPP standa rd por t number.
121 Step6. Select a su itable printer manu facturer and the printer model an d click “Next”. If your printer is not in the list, click “H ave Disk …” to install t he driver of the printer. After installa tion, the prin ter model will be added to the list.
122 Step8. You have added the network printer to the PC successfully. The inform at ion of the printer is displayed in the windows. Click “Finish ”.
123 10. LPR Printing 10.1 Introduction LPR Printing (Line Printer Remote technology) allow s users to connect to pr inters via TCP/IP for printing s haring. The computer with Windows 98SE/Me/NT/2000/XP/2003, Windows Vista and MAC OS 10.x Operating Systems can use the protocol to share prin ting in the network.
124 10.2 Standard LPR Settings in Windows XP To configure the LPR setting in Windows XP, please follow the steps below. The LPR setup procedures in Windows 2000 and 2 003 are similar. 1. Click “Start”, choose “Set tings” and select “Printers and Faxes”.
125 4. Select “Local Printer atta ched to this computer” and click “Next” . 5. Choose “Creat e a new port” and “Standard TCP/IP Port”. Click “Next”.
126 6. Please make sure that th e Print Server and the Printer have turned on and connecte d to the network correctly before you continue. Click “Next”. 7. Enter the IP Address of the Pri nt Server in the “Printer Name or IP Addre ss”. C lick “Next”.
127 8. Select “Custom” and clic k “Settings”. When you have finished the settings at step 9, cl ick “N ext” to continue..
128 9. Select “LPR” and enter “l pt1” in the “Queue Name”, click “OK”. B y default the queue name of the Print Server is “lpt1”..
129 10. Click “Fin ish”. 11. Select a suitable printer manufacturer and the printer model and click “Next” . If you r printer is not in the list, click “Have Disk…” to install the driver of the printer. After install ation, the prin ter model will be added to the list.
130 12. Choose to set th e print whether as a default printer or not. Click “Next”. 13. You have added the ne twork printer to the P C successfully.
131 10.3 Standard LPR Settin gs in Windows Vista To configure the LPR setting in Windows Vista, please follow the steps below. 1. Click “Start”, sele ct “SettingsPrint ers”. 2. Click “Add a Printer”. 3. The “Add Printer” wi zard is displayed.
132 4. Choose “Creat e a new port” and select “Standard TCP/IP Port”. Cli ck “Next”. 5. Enter the IP Address of the Print Server in the “Hostname or IP address” field.
133 6. Select “Custom” and clic k “Settings”. When you have finished the settings at step 7, cl ick “N ext” to continue..
134 7. Select “LPR” and enter “l pt1” in the “Queue Name”, click “OK”. B y default the queue name of the Print Server is “lpt1”..
135 8. Select the printer manufa cturer and the printer model and click “Next”. If your prin ter is not in the list, click “Have Disk…” to install the dr iver of the printer. After installation, the printer model will be added to the list. 9.
136 10. The printer drivers are being install ed. 11. It is recommended to prin t a test page. Click “Finish ”..
137 12. The printer is added to “Printers” page, y ou have added the printer to your computer su ccessfully. Now you can start to print from your computer to the print server.
138 10.4 Standard LPR Se ttings in MAC OS 10.x 10.4.1 MAC 10. 4.x To enable LPR Printing in Macintosh 10.4 .x, please follow the procedures below. Open Print and Fax from the System Prefer ences. With the Printing ta b selected, click the “Add” button.
139 10.4.2 MAC 10. 3.x To enable LPR Printing in Macintosh 10.3 .x, please follow the procedures below. 1. In the Desktop, clic k “System Pref erences”.
140 3. From the “Print & Fax” scre en, click “Set Up Printers…”. 4. Click “Add” to add the new Print Server through TCP/IP..
141 5. Enter the “Printer Type”, “Printer Address” and “Queue Name” and select the “Printer Model” to se tup the Print Server. C lick “Ad d ” to continue. Printer Ty pe: LPD/LPR Printer Address: Input the IP Address of the Print Server Queue Name: T he queue name of the Print Ser ver is “lpt1”.
142 6. The Print Server is instal led compl etely. You can see it in the “Printer Li st”. 7. You can print a f ile to c heck whether the Print Server is installed successfully.
143 1 1. W indows XP SP2 Setup In Windows XP SP2, XP SP2’ s firewall would block the unknown communications. This print server has allowed the communications data pa ssed through the XP SP2’s firewall.
144 Step3. Select “Advanced” ta b and click “Settings…”..
145 Step4. Select “Exceptions” t ab and click “Add Program…”..
146 Step5. Click “B rowse” to add a new program..
147 Step6. Open the “NPUtil” file from “C:Program FilesPrintServer Ut ilities” (w here C: is the system drive)..
148 Step7. A new program “Netwo rk Ports Quick Setup” is displayed in the list, click “Ok”..
149 Step8. Click “Ok” . You have completed the setting. The Windows XP SP2 will allow the in coming netwo rk connections activated by the program..
An important point after buying a device Edimax PS-1206P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edimax PS-1206P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edimax PS-1206P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edimax PS-1206P you will learn all the available features of the product, as well as information on its operation. The information that you get Edimax PS-1206P will certainly help you make a decision on the purchase.
If you already are a holder of Edimax PS-1206P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edimax PS-1206P.
However, one of the most important roles played by the user manual is to help in solving problems with Edimax PS-1206P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edimax PS-1206P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
