Instruction/ maintenance manual of the product EW-7608O Edimax
Go to page of 11
2.4GHz High Gain Outdoor/Indoor Antenna 14dBi Directional Panel Antenna 8dBi Omni-directional Antenna User’s Manual.
COPYRIGHT & TRADEMARKS Copyright in 2002/2003 by manufacturer . All rights reserved. No part of this manual may be reproduced, transcribed, stored in a retrieval system, translated into any language or computer language without the prior written consent of the manufacturer .
Contents 1 Introduction ............................................................................... 1 1.1 T echnical Sp ecification ............................................................................. 1 1.2 Package Content ...............
1 1 Introduction Thank you for purchasing this 2.4GHz High Ga in Antenna Kit. This product is an outdoor/indoor antenna kit which extends th e transmitting and receiving power of a IEEE 802.1 1b com pliant W ireless Access Poin t. W ith this kit, your wireless network will have extraordinary transm ission distances and wider coverage range.
2 Radiation Pattern 14dBi Directional Panel Antenna 8dBi Omni-dir ectional Antenna Accessories Extension Cable N-male to RP-SMA-male / 6.5 ft. (2 m) / 1.
3 1.2 Package Content One Antenna One Extension Cable One Interconnecting Cable (only for 8dBi Omni-directional antenna) One Surge Arrestor One Mounting Kit Set One Connector C.
4 2 Installation This chapter describes the installation procedure for the anten na kit. 2.1 Installation Guidelines Please observe the following guidelines when you are installing the antenna kit: .
5 Pole Mount Configuration Using a Ring Clamp 1. Fix one of the M-shaped metal fixing to the back of the antenna. 2. Perforate the ring clamp in to th e other M-shaped m eta l fixing as shown in the diagram. 3. Fix the clamp on a secure ironed pole in the desired position, the diameter of the pole is preferably less than 2 inches.
6 3. Fix the screw clamps on a secure ironed pole in the desired position. 4. Connect the two M-shaped metal fixings together with the M8 x 110 bolt. The antenna can be vertically a ligned with this connection. 2.2.2 8dBi Omni-direction al Antenna W all Mount configuration 1.
7 2.3 Installing the Surge Arrestor W ith the surge arrestor attached to the lig htning protector of the building, all devices downstream are protected by the ground fr om lightning strikes. Please follow the steps below to install the sur ge arrestor: 1.
8 2.4 Connecting to the Wireless Access Point The W ireless Access Point is conn ected to the antenna through an extension cable. A connector converter attached to the kit is used to conve rt the SMB connector to the RP-SMA connector . It is applied to W i reless Access Point with SMB connector .
An important point after buying a device Edimax EW-7608O (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edimax EW-7608O yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edimax EW-7608O - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edimax EW-7608O you will learn all the available features of the product, as well as information on its operation. The information that you get Edimax EW-7608O will certainly help you make a decision on the purchase.
If you already are a holder of Edimax EW-7608O, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edimax EW-7608O.
However, one of the most important roles played by the user manual is to help in solving problems with Edimax EW-7608O. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edimax EW-7608O along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
