Instruction/ maintenance manual of the product ER-5390P Edimax
Go to page of 9
8-Port UTP +1-Port BNC 10Mbps Hub ER-5390P User’s Manual.
FCC Class B Certification This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1.This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation.
1. Introduction Congratulations on purchasing Edimax’s high-performance 9- Port Desktop Ethernet Hub. Featur ing ease of installation, this hub helps hook your PCs together at a minute, communicating instantly over the net to share resources of your PCs and Printers.
2. Features & Specifications (1) Features IEEE 802.3 compliant (10Mbps, CSMA/CD) Provide one slide switch to se lect Port 1 to uplink mode or normal mode Provide one BNC port for thin .
3. Package Contents One Ethernet Hub One Externa l Power Adapter User’s Manual POWER COL LNK/ACT 9-Po rt Eth ern et Hu b 3 2 1 4 5 6 7 8 10Mbps.
4. Physical Description (1) Panel (2) LED LED Status Description Number of LED Lit Power is supplied Power Off No Power One for the whole Hub Lit Collision is detected in this segment COL Off No Colli.
5. Installation (1) Operating Environment ER-5390P must be installed and operated within the limits of specified operating temperature an d humidity (see previous section under Specifications). Do not pl ace objects on top of the unit. Do not obstruct any vents at the sides of the unit.
(4) Connecting the power Connect the output end of th e power adapter to the power connector on the rear pa nel of the hub. Connect the power ad apter to the power outlet.
6. Trouble-shooting 1. Power LED is not lit Check if the power adapter is proper ly connected to the p o w e r o u t l e t . Make sure the DC power jack is firmly plugged into the power socket of the hub. 2. Link Status LED is not lit Check the power switch of the netw ork devices attached to the hub; make sure they are turned ON.
An important point after buying a device Edimax ER-5390P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edimax ER-5390P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edimax ER-5390P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edimax ER-5390P you will learn all the available features of the product, as well as information on its operation. The information that you get Edimax ER-5390P will certainly help you make a decision on the purchase.
If you already are a holder of Edimax ER-5390P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edimax ER-5390P.
However, one of the most important roles played by the user manual is to help in solving problems with Edimax ER-5390P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edimax ER-5390P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
