Instruction/ maintenance manual of the product FP430-FP860 EdgeStar
Go to page of 7
.
1 SAFETY PRECAUTIONS Read all of the instructions before using this appliance. When using this appliance, always exer cise basic safely precautions, including the following: x Do not use if the power supply cord is damaged. If damaged, i t must be replaced by qualified technician.
11 This warranty does not cover use of Edge Star products in commercia l settings. DESCRIPTION OF WARRANTY SERVICE: All defective product components covered by this warranty will be repaired or replac.
0 1 temperature is too low. . l e v e l r e z e e r f e h t e k a M . l e v e l t o n s i r e z e e r f e h T The freezer is noisy. Some parts came loose. Contact customer service representatives online via email at service@edgestar.com or by telephone at 1- 866-319-54 73.
9 x Dirt from the condenser should be cleaned by a qualified technician when necessary. Problem Cause Solution The compressor runs for 1 to 5 minutes and stops. The voltage is not in the correct range. Switch off the power and restart when the power is normal.
5 x Position your portable freezer in a location where there is proper air circulation and electrical connec tions. x Keep the portable freezer away from heat and direct sunlight if possible. x This portable freezer is suitable for car use and camping however, the a ppliance should not be exp osed to rain.
7 1. When the freezer is plugged in to a power outlet, pre ss the “set” button. The LED will display the f actory pre-set temperature of 0°F 2. To adjust the temperature: a. Press the “set” button again b. While the LED is flashing, press the “ ▲ ” or “ ▼ ” buttons to reach the desired temperature c.
An important point after buying a device EdgeStar FP430-FP860 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EdgeStar FP430-FP860 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EdgeStar FP430-FP860 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EdgeStar FP430-FP860 you will learn all the available features of the product, as well as information on its operation. The information that you get EdgeStar FP430-FP860 will certainly help you make a decision on the purchase.
If you already are a holder of EdgeStar FP430-FP860, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EdgeStar FP430-FP860.
However, one of the most important roles played by the user manual is to help in solving problems with EdgeStar FP430-FP860. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EdgeStar FP430-FP860 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
