Instruction/ maintenance manual of the product AP550Z EdgeStar
Go to page of 5
Troubleshooting and reconnecting wires to the “compressor capacitor” on the AP550Z Tools required: Phillips screwdriver The problem: If the AP550Z was recently shipped or roughl y moved, it may have one of two problems: • The fan to the interior of the room turn s on, but the air blown out of it is room temperature.
4. Once the filter frame has been removed, rem ove the lower portion of the back of the unit: Once the screws have been removed, this portion comes ri g ht off Remove these four screws 5. Now remove the left side of the unit (left, assuming you are facing the rear of the unit) Step A.
Step C. Pull the panel down and off the unit Step B. Remove these two screws. 6. Locate the “compressor capacitor”. It is a silver cylinder that is about 4” long.
7. Look at the wires going into this capacitor- there should be four wires and one bare terminal. A view of the capacitor from below A close-up of the capacitor.
8. If any wires are not connected, conn ect them. The three blue wires all connect to one terminal, and the one re d wire connects to a term inal all by itself. This image shows the capacitor removed (not a required step) in order to show g reater detail Blue wires all connect here Red wire connects here Bare terminal 9.
An important point after buying a device EdgeStar AP550Z (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EdgeStar AP550Z yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EdgeStar AP550Z - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EdgeStar AP550Z you will learn all the available features of the product, as well as information on its operation. The information that you get EdgeStar AP550Z will certainly help you make a decision on the purchase.
If you already are a holder of EdgeStar AP550Z, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EdgeStar AP550Z.
However, one of the most important roles played by the user manual is to help in solving problems with EdgeStar AP550Z. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EdgeStar AP550Z along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
