Instruction/ maintenance manual of the product TAH Eclipse Combustion
Go to page of 8
Info 140 11/4/03 W ARNING The burners covered in this Guide are designed to mix fuel with air and burn the resulting mixture. All fuel burning devices are capable of producing explo- sions and fires when improperly applied, installed, adjusted, controlled, or maintained.
2 Eclipse AirHeat v1.0 - Installation Guide N o . 140, 11/4/03 Impor tant Notices About Safe Burner Operation Storage Store the burner inside. Exposure to the elements can damage the burner.
3 Eclipse AirHeat v1.0 - Installation Guide N o . 140, 11/4/03 Specifications Input: 1,000,000 Btu/hr. per lineal foot (962 kW/m). Fuels: Natural gas or 100% propane vapor. Call Eclipse for information on using other fu- els. Gas Turndown: 40:1 Pilot Input: Approximately 25,000 Btu/hr.
4 Eclipse AirHeat v1.0 - Installation Guide N o . 140, 11/4/03 2.0 Control System Requirements Turndown Method Input is normally controlled by a motorized butterfly valve in the gas line to the burner.
5 Eclipse AirHeat v1.0 - Installation Guide N o . 140, 11/4/03 Figure 5–Mounting & Duct Lengths • Provide at least 3" (76 mm) clear- ance between burner and top, bot- tom and sides of the duct. • Profile plates are not required for good burner operation, but uni- form velocity must be maintained for full length of burner.
6 Eclipse AirHeat v1.0 - Installation Guide N o . 140, 11/4/03 3.0 Duct Design and Burner Mounting Duct Design See Figure 5 for typical mounting arrangements and duct designs. Support The mounting flange or brackets supplied with an AH burner are capable of sup- porting the weight of the burner and blower.
7 Eclipse AirHeat v1.0 - Installation Guide N o . 140, 11/4/03 4.0 Star t-Up And Adjustment (cont’ d.) Set Air Pressure Drop Measure the air pressure drop across the burner as shown in Figure 7. Turn the disc on the blower air inlet until the air pressure drop is between 0.
6.0 T roub le-Shooting Symptom Cause Check Remedy 1. Burner does not a) Air pressure switches a) Check pressures in a) Change pressure start initially. not making. duct at location of connections where switch connections. a more positive b) Faulty pressure b) Check electrical pressure is present.
An important point after buying a device Eclipse Combustion TAH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eclipse Combustion TAH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eclipse Combustion TAH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eclipse Combustion TAH you will learn all the available features of the product, as well as information on its operation. The information that you get Eclipse Combustion TAH will certainly help you make a decision on the purchase.
If you already are a holder of Eclipse Combustion TAH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eclipse Combustion TAH.
However, one of the most important roles played by the user manual is to help in solving problems with Eclipse Combustion TAH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eclipse Combustion TAH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
