Instruction/ maintenance manual of the product AVN4429 Eclipse - Fujitsu Ten
Go to page of 15
Connecting the vehicle speed pulse, parking brake, and reverse cables (wires) Deutsch Español Français Italiano Nederlands Svenska English Be sure to read this installation manual thoroughly prior to installation. If installation methods or nonstandard parts not specified in this installation manual are used, accidents or injury may result.
- 2 - Deutsch English Español Français Italiano Nederlands Svenska When installing the main unit, some vehicle models may require the use of items that need to be obtained separately such as a power supply adaptor cable, radio antenna adaptor cable or mounting bracket.
- 3 - Deutsch Español Français Italiano Nederlands Svenska English Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN4429. They show safe and correct ways to handle the main unit so as to prevent personal injury to you and others and avoid damage to property.
- 4 - Deutsch English Español Français Italiano Nederlands Svenska • Once installation and wiring have been completed, return the brakes and electrical equipment such as lights, horn, hazard warning lights and turn signal lights to their original places, and check that they operate correctly.
Deutsch Español Français Italiano Nederlands Svenska English - 5 - • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.
- 6 - Deutsch English Español Français Italiano Nederlands Svenska Antenna power supply (Blue) Connect to the automatic-antenna control terminal of the vehicle. Control power supply (Blue/White) Connect the control terminal for the external amplifier, etc.
- 7 - Deutsch Español Français Italiano Nederlands Svenska English - V ehicle connections - • You will need to purchase the necessary component adapter cable for the vehicle so that the power supplies can be utilised. (Contact the dealer for further details.
- 8 - Deutsch English Español Français Italiano Nederlands Svenska Notes on installation The locations where the vehicle speed pulse signal cable may vary depending on the vehicle model and grade. Ask the car dealer or your nearest ECLIPSE dealer for details.
- 9 - Deutsch Español Français Italiano Nederlands Svenska English - Using the splicing connector - Insert the connection cable [vehicle speed pulse signal cable (purple/white), parking brake cable (red/white), or reverse cable (green)] from the main unit and the vehicle cable into the splicing connector.
- 10 - Deutsch English Español Français Italiano Nederlands Svenska • Never cut the insulation on the power cable or use it to power any other main unit. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.
- 11 - Deutsch Español Français Italiano Nederlands Svenska English Tip Notes on installation • Do not install the antenna in places (such as front pillars and roof panel) that are shielded from the sky.
- 12 - Deutsch English Español Français Italiano Nederlands Svenska Choose an installation location on the dashboard which is flat and has a clear view of the sky. 1 Install the earth plate to the dashboard. 2 Install the GPS antenna to the earth plate.
- 13 - Deutsch Español Français Italiano Nederlands Svenska English • Carefully bind any excess length of cable that is connected to the main unit and secure it to an area of empty space in the vehicle so that it does not move around or get caught in the main unit or vehicle-side equipment.
- 14 - Deutsch English Español Français Italiano Nederlands Svenska • If using hexagonal head bolts (Red: M5x8), use the four hexagonal head bolts (Red: M5x8) which were used to install the carrying bracket and the four accessory hexagonal head bolts (Red: M5x8).
- 15 - Deutsch Español Français Italiano Nederlands Svenska English Chec Chec king oper king oper ation after installation ation after installation Install the PND to the main unit. 1 Insert the ignition key into the vehicle and start the engine. 2 Check the connection status for each signal in a place where they are easy to see.
An important point after buying a device Eclipse - Fujitsu Ten AVN4429 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eclipse - Fujitsu Ten AVN4429 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eclipse - Fujitsu Ten AVN4429 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eclipse - Fujitsu Ten AVN4429 you will learn all the available features of the product, as well as information on its operation. The information that you get Eclipse - Fujitsu Ten AVN4429 will certainly help you make a decision on the purchase.
If you already are a holder of Eclipse - Fujitsu Ten AVN4429, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eclipse - Fujitsu Ten AVN4429.
However, one of the most important roles played by the user manual is to help in solving problems with Eclipse - Fujitsu Ten AVN4429. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eclipse - Fujitsu Ten AVN4429 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
