Instruction/ maintenance manual of the product AVN 6000 Eclipse - Fujitsu Ten
Go to page of 16
Be sure to read this installation manual thoroughly prior to installation and making connections. If installation methods or non-standard parts not specified in this installation manual are used, accidents or injury may result. Professional installation is recommended, contact the place of purchase to schedule an appointment.
- 2 - Components Components Check that all of the following components are present Check that all of the following components are present GPS antenna components GPS antenna x 1 12 Waterproof cushion x.
- 3 - Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the AVN6000. They show safe and correct ways to handle the main unit to prevent personal injury to you and others and avoid damage to property.
- 4 - • • This main unit must be operated only as an on-board main unit, or it may cause electrical shock or injury. • • Do not play distorted sounds for long periods of time; the speakers may overheat and cause a fire.
- 5 - Installation Diag Installation Diag r r am am GPS antenna (When installing inside the vehicle) 12 GPS antenna (When installing outside the vehicle) 12 • • If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windscreen will determine the accuracy of the GPS antenna to receive the GPS signal.
INTERCONNECTING WIRES (Speed pulse, parking brake, reverse) - 6 - • • Never cut the insulation on the power wire or use it to power any other equipment. If the rated current capacity of the power wire is exceeded, fire and electric shocks may result.
- 7 - Wire colours and connection points f or inter connecting wires ,,,, , and 7 6 5 4 3 2 Never connect the power supply to the speaker wires (No.6 and No.7), otherwise it will cause damage to the main unit. Caution B+ (Yellow) Connect where power is constantly available, regardless of the ignition key's position.
- 8 - VCR output terminals Connect to a monitor with video input. Yellow : Video signal White : Audio(left) signal Red : Audio(right) signal VCR input terminals Connect to the output wire of an external video main unit such as a VCR.
- 9 - Vehicle component adapter wires Vehicle harness From main unit - Example of using vehicle adapter wires - - V ehicle connections - Power supplies for combined equipment • • You will need to purchase the necessary vehicle component adapter wire for the vehicle so that the power supplies can be utilized.
- 10 - Notes on installation • • Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the connections. If the wires are incorrectly connected, accidents or problems with correct operation may result.
Route the parking brake signal wire to the main unit. - 11 - Foot-operated parking brake Hand-operated parking brake - Connecting point for parking brake signal (example) - Attach a splicing connector at this location.
- 12 - System connection e System connection e xample xample • • Install and connect all of the peripheral units before connecting them to the main unit. • • Do not remove any of the protective caps (RCA, etc.) unless in use. • • Be sure to wrap the interconnecting wires with tape (PVC tape) to insulate them.
- 13 - Tip Installing the GPS antenna Installing the GPS antenna Notes on installation • • Do not install the antenna in places (such as front pillars and roof panel) that are shielded from the sky.
- 14 - - Installation inside the vehicle (example) - Choose an installation location on the dashboard which is flat and has a clear view of the sky. 1 Install the earthing plate to the dashboard. 2 Install the GPS antenna to the earthing plate. 3 Earthing plate 12 Secure the GPS antenna.
- 15 - - Installation outside the vehicle (example) - Choose an installation location where the GPS antenna can be attached securely. 1 Remove the backing paper from the body protective sheet and attach the sheet to the vehicle. 2 Install the GPS antenna on top of the body protective sheet.
Remove the pocket and any other accessories from the centre cluster to make room for the main unit. 1 Remove the mounting brackets for the pocket. 2 Attach the brackets to the main unit. 3 Install the main unit in the vehicle. 4 Be careful not to forcefully push on the main unit's display or buttons during installation.
An important point after buying a device Eclipse - Fujitsu Ten AVN 6000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eclipse - Fujitsu Ten AVN 6000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eclipse - Fujitsu Ten AVN 6000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eclipse - Fujitsu Ten AVN 6000 you will learn all the available features of the product, as well as information on its operation. The information that you get Eclipse - Fujitsu Ten AVN 6000 will certainly help you make a decision on the purchase.
If you already are a holder of Eclipse - Fujitsu Ten AVN 6000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eclipse - Fujitsu Ten AVN 6000.
However, one of the most important roles played by the user manual is to help in solving problems with Eclipse - Fujitsu Ten AVN 6000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eclipse - Fujitsu Ten AVN 6000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
