Instruction/ maintenance manual of the product PB-610 Echo
Go to page of 24
Power Blower Operator's Manual MODEL PB-610 W ARNING DANGER Read rules for safe operation and all instructions carefully. ECHO provides this Operator's Manual which must be read and understood for proper and safe operation.
2 T ABLE OF C ONTENTS Introduction .................................................................. 2 - The Operator's Manual .......................................... 2 Safety ..................................................................
3 P OWER B LOWER O PERA TOR ' S M ANUAL IMPORTANT The enclosed message provides information necessary for the protection of the unit. NOTE This enclosed message provides tips for use, care and maintenance of the unit.
4 Physical Condition Your judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection Wear eye protection that meets ANSI Z87.
5 P OWER B LOWER O PERA TOR ' S M ANUAL Repetitive S tress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas.
6 Emission Control Label (located on Engine) (EXAMPLE ONLY, information on label varies by FAMILY). PRODUCT EMISSION DURABILITY The 300 hour emission durability compliance period is the time span sele.
7 P OWER B LOWER O PERA TOR ' S M ANUAL 1 2 3 4 5 6 7 8 10 11 12 9 13 14 Hot Decal (near muffler) General W arning Decal (located on top of blower housing) P/N 89016006361 P/N 89016009461 72 Category III dB(A) Measured at 50 ft. (15m) per ANSI B175.
8 1. AIR CLEANER - Contains replaceable air filter element. 2. SPARK PLUG - Provides spark to ignite fuel mixture. 3. SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER - The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler.
9 P OWER B LOWER O PERA TOR ' S M ANUAL A SSEMBL Y W ARNING DANGER Never perform maintenance or assembly procedures with engine running or serious personal injury may result. INST ALL BLOWER PIPES / STICK HANDLE 1 . Assemble clamps (A) onto both ends of flexible pipe (B).
10 O PERA TION NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.
11 P OWER B LOWER O PERA TOR ' S M ANUAL o i t a R 1 : 0 5 - x i M l i O o t l e u F . S . UC I R T E M S A GL I OS A GL I O s n o l l a G. z o . l Fr e t i L. c c 1 2 5 6 . 2 2 . 5 3 1 4 8 0 2 0 8 0 6 1 0 0 4 Mixing Instructions 1 . Fill an approved fuel container with half of the required amount of gasoline.
12 D 4. Recoil Starter Pull recoil starter handle (D) and engine should start. 5. Choke Move choke (B) to run ( ) position and if necessary, restart engine. NOTE If engine does not start after 5 pulls, repeat instructions 2-5. NOTE Allow engine to warm up before use.
13 P OWER B LOWER O PERA TOR ' S M ANUAL NOTE Never use a higher speed setting than necessary to perform a task. Remember, the higher the engine speed, the louder the blower noise. Minimize dust by using blower at lower speeds and by dampening material with water/mist when necessary.
14 M AINTENANCE Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance.
15 P OWER B LOWER O PERA TOR ' S M ANUAL W ARNING DANGER Allow the engine and muffler to completely cool before performing any maintenance activity.
16 SP ARK PLUG Level 1. Tools required: 3/4 in. Spark Plug deep socket, feeler gauge Parts Required: REPOWER TM Tune Up Kit P/N 90071 IMPORTANT Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) otherwise severe engine damage may occur. 1 . Remove spark plug and check for fouling, or worn and rounded center electrode.
17 P OWER B LOWER O PERA TOR ' S M ANUAL COOLING SYSTEMS CLEANING Level 2. Tools required: 25 - 50 mm (1 - 2 in.) Cleaning brush, cross head screwdriver Parts Required: None, if you are careful. IMPORTANT To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area.
18 A D C B E EXHAUST SYSTEM Spark Arrestor Screen Level 2. Tools required: Cross head screwdriver, soft metal brush Parts Required: Spark arrestor screen. Gaskets (3) IMPORTANT Carbon deposits in muffler will cause a drop in engine output and overheating.
19 P OWER B LOWER O PERA TOR ' S M ANUAL CARBURETOR ADJUSTMENT Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize.
20 Initial Adjustment 1 . With engine off, turn HI speed screw (C) counterclockwise to stop. 2 . Turn LO speed screw (B) midway between stops. 3 . Turn idle screw (A) until tip of screw just touches throttle plate; then turn three (3) turns clockwise.
21 P OWER B LOWER O PERA TOR ' S M ANUAL T R A H C G N I T O O H S E L B U O R T m e l b o r Pk c e h Cs u t a t Se s u a Cy d e m e R - s k n a r c e n i g n E / d r a h s t r a t s t ' n s.
22 2 . Place the stop switch in the "STOP" position. 3 . Remove accumulation of grease, oil, dirt and debris from exterior of unit. 4 . Perform all periodic lubrication and services that are required.
23 P OWER B LOWER O PERA TOR ' S M ANUAL S PECIFICA TIONS MODEL ---------------------------------------------------------- PB-610 Length ------------------------------------------------------------ 325 mm (12.8 in.) Width ------------------------------------------------------------- 520 mm (20.
DEALER? Call 1-800-432-ECHO 1-800-432-3246 or www .echo-usa.com ECHO, INCORPORA TED 400 Oakwood Road Lake Zurich, IL 60047 www .echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 Mon - Fri C.
An important point after buying a device Echo PB-610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo PB-610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo PB-610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo PB-610 you will learn all the available features of the product, as well as information on its operation. The information that you get Echo PB-610 will certainly help you make a decision on the purchase.
If you already are a holder of Echo PB-610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo PB-610.
However, one of the most important roles played by the user manual is to help in solving problems with Echo PB-610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo PB-610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
