Instruction/ maintenance manual of the product PB-220SI Echo
Go to page of 8
PB-2100,PB-2155,PB-2200SI 21-21H-00 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
SERVICE INFORMA TION PB-2100 PB-2155 PB-2200SI 2 1 SERVICE INFORMA TION 1-1 Specifications Model PB-2100 PB-2155 PB-2200SI Dimensions Length* mm(in) 220 (8.7) 250 (9.8) Width mm(in) 330 (13.0) Height mm(in) 340 (13.4) Dry weight** kg(lb) 4.0 (8.8) 4.1 (9.
SERVICE INFORMA TION PB-2100 PB-2155 PB-2200SI 3 1-2 T echnical data Model PB-2100 PB-2155 PB-2200SI Engines Idling speed r/min 2400 - 3200 Wide open throttle speed* r/min 6800 - 7700 Compression pressure MPa (kgf/cm 2 ) (psi) 0.83 (8.4) 120 Ignition system Spark plug gap mm (in) 0.
SERVICE INFORMA TION PB-2100 PB-2155 PB-2200SI 4 1-3 T orque limits Descriptions Size kgf•cm N•m in•lbf Starter Pawl carrier M 8 80 - 100 8 - 10 70 - 85 system Starter case M 4* 25 - 35 2.5 - 3.5 22 - 30 Ignition CDI module (Ignition coil) M 4 35 - 50 3.
SERVICE INFORMA TION PB-2100 PB-2155 PB-2200SI 5 5K193 5K228 5K229 5K230 5K231 5K016 5K171 5K042 5K194 1-5 Service Limits Description A Cylinder bore When plating is worn and aluminium can be seen B Piston outer diameter Min. 32.13 (1.265) C Piston pin bore Max.
SERVICE INFORMA TION PB-2100 PB-2155 PB-2200SI 6 2 0 20 4 0 40 6 0 60 8 0 80 12 0 120 1 4 0 140 1 6 0 160 1 8 0 180 2 0 20 1 0 0 100 1-6 Special tools 1 4 5 2 6 9 10 11 13 12 14 15 3 8 Key Part Number.
SERVICE INFORMA TION PB-2100 PB-2155 PB-2200SI 7 2 EMISSION ADJUSTMENT GUIDE 2-1 General adjusting rules Before starting the unit for adjustment, check the following items. 1. The correct spark plug must be clean and properly gapped. 2. The air filter element must be clean and properly installed.
SERVICE INFORMA TION PB-2100 PB-2155 PB-2200SI 8 2-3 Adjusting carburettor 1. Start engine and warm it up well for about 3 - 5 minutes with cycle of 50 seconds at WOT (Wide Open Throttle) and 10 seconds at idling. 2 . Adjust H mixture needle to obtain maximum engine speed at WOT .
An important point after buying a device Echo PB-220SI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo PB-220SI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo PB-220SI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo PB-220SI you will learn all the available features of the product, as well as information on its operation. The information that you get Echo PB-220SI will certainly help you make a decision on the purchase.
If you already are a holder of Echo PB-220SI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo PB-220SI.
However, one of the most important roles played by the user manual is to help in solving problems with Echo PB-220SI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo PB-220SI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
