Instruction/ maintenance manual of the product CS-4400 Echo
Go to page of 68
OPERA TOR’S MANUAL CHAIN SA W CS-4400 A CHTUNG GE F AH R LESEN SIE DIE BEDIENUNGSANLEITUNG SORGFÄLTIG DURCH UND BEFOLGEN SIE DIE SICHERHEITSBESTIMMUNGEN, WEIL SONST DAS RISIKO SCHWERER VERLETZUNGEN BESTEHT. W ARNING D ANGER READ THE INSTRUCTIONS CAREFULLY AND FOLLOW THE RULES FOR SAFE OPERATION.
2 CS-4400 E N G L I S H D E U T S C H I T A L I A N O INTRODUCTION CONTENTS INTRODUCTION ........................................................ 2 DECALS AND SYMBOLS .......................................... 3 RULES FOR SAFE OPERATION ..............
3 CS-4400 E N G L I S H D E U T S C H I T A L I A N O DECALS AND SYMBOLS GB Carefully read the operator’s manual Wear eyes, ears and head protection Carburettor adjustment - Idle speed Carburettor a.
4 CS-4400 E N G L I S H D E U T S C H I T A L I A N O SYMBOLE FÜR DIE BEDIENUNGSELEMENTE UND ANDEREN HINWEISE D WARNUNG Die Bedienungsanleitung sorgfältig durchlesen Augen-, Ohren- und Kopfschutz tr.
5 CS-4400 E N G L I S H D E U T S C H I T A L I A N O DECALCOMANIE E SIMBOLI I “AVVERTENZA, VEDERE IL MANUALE DELL’OPERATORE ” Indossare mezzi di protezione degli occhi, dell’udito e del capo .
6 CS-4400 E N G L I S H D E U T S C H I T A L I A N O R ULES FOR SAFE OPERA TION OPERATOR’S MANUAL • Read the operator’s manual for your chain saw carefully. Be thoroughly familiar with the chain saw’s controls and how to use the chain saw properly.
7 CS-4400 E N G L I S H D E U T S C H I T A L I A N O 12 3456 CAUTION Stuffing ears with cotton is not recommended. • All persons who make part of their living using chain saws should be tested periodically for hearing deterioration. • Always wear a cap or hat when working with a chain saw.
8 CS-4400 E N G L I S H D E U T S C H I T A L I A N O • Never wear loose clothing, unbuttoned jackets, flared sleeves and cuffs, scarves, tie-strings, neckties, cords, chains, jewellery, etc. which could snag the saw chain or underbrush. • Clothing should be of sturdy, protective material.
9 CS-4400 E N G L I S H D E U T S C H I T A L I A N O 3 m STARTING ENGINE • Move the chain saw at least 3 m from the fuelling point before starting the engine. • Do not allow other persons to be near the chain saw when you are starting or cutting with the chain saw.
10 CS-4400 E N G L I S H D E U T S C H I T A L I A N O TRANSPORTATION • When transporting your chain saw, use the appropriate guide bar cover. • Carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the silencer away from your body.
11 CS-4400 E N G L I S H D E U T S C H I T A L I A N O WARNING DANGER KICKBACK SAFETY PRECAUTION FOR CHAIN SAW USERS: KICKBACK MAY OCCUR WHEN THE NOSE OR TIP OF THE GUIDE BAR TOUCHES AN OBJECT OR WHEN THE WOOD CLOSES IN AND PINCHES THE SAW CHAIN IN THE CUT.
12 CS-4400 E N G L I S H D E U T S C H I T A L I A N O • Do not operate a chain saw with one hand! Serious injury to the operator, helpers or bystanders may result from one-handed operation. For proper control, always use two hands when operating a chain saw, one of which operates the trigger.
13 CS-4400 E N G L I S H D E U T S C H I T A L I A N O 3. OTHER SAFETY PRECAUTIONS VIBRATION AND COLD It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to cold and vibration.
14 CS-4400 E N G L I S H D E U T S C H I T A L I A N O REPETITIVE STRESS INJURIES It is believed that over-using the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain to the areas just mentioned.
15 CS-4400 E N G L I S H D E U T S C H I T A L I A N O WARNING DANGER DO NOT MODIFY A CHAIN SAW IN ANY WAY. ONLY ATTACHMENTS AND PARTS SUPPLIED BY KIORITZ CORP. OR EXPRESSLY APPROVED BY KIORITZ CORP. FOR USE WITH THE SPECIFIC KIORITZ CORP. CHAIN SAW MODELS ARE AUTHORIZED.
16 CS-4400 E N G L I S H D E U T S C H I T A L I A N O SERVICES • All chain saw service operations, other than items listed in the operator’s manual maintenance instructions, should be performed by competent service personnel.
17 CS-4400 E N G L I S H D E U T S C H I T A L I A N O CHAIN BRAKE The chain brake’s function is to stop chain rotation after a kickback. It neither prevents nor reduces kickback.
18 CS-4400 E N G L I S H D E U T S C H I T A L I A N O DESCRIPTION BESCHREIBUNG DESCRIZIONE DELLE P ART I ENGLISH DEUTSCH ITALIANO GB D I 1 11 12 13 14 15 19 20 16 17 18 2 3 4 5 6 7 8 9 10 22 21 (8903.
19 CS-4400 E N G L I S H D E U T S C H I T A L I A N O DESCRIPTION (See page 18) GB 1. OPERATOR’S MANUAL - Included with unit. Read before operation and keep for future reference to learn proper, safe operating techniques.
20 CS-4400 E N G L I S H D E U T S C H I T A L I A N O BESCHREIBUNG (Siehe Seite 18) D 1. BEDIENUNGSANLEITUNG - Mitgeliefert. Vor lnbetriebnahme lesen und als Nachschlagewerk für Betriebssicherheit sorgsam aufbewahren.
21 CS-4400 E N G L I S H D E U T S C H I T A L I A N O DESCRIZIONE DELLE P ART I (Far riferimento a pag. 18) I 1. MANUALE D’ISTRUZIONI - Accluso nell’imballo della macchina. Leggetelo attentamente e tenetelo come riferimento futuro per imparare le tecniche di lavoro sicure e corrette.
22 CS-4400 E N G L I S H D E U T S C H I T A L I A N O W ARNING D ANGER FOR YOUR OWN SAFETY, ALWAYS STOP THE ENGINE BEFORE PERFORMING ANY OF THE FOLLOWING OPERATIONS. ASSEMBL Y MOUNTING GUIDE BAR AND CHAIN The unit is delivered with guide bar and saw chain separated.
23 CS-4400 E N G L I S H D E U T S C H I T A L I A N O CA UTION 1. All adjustments should be made cold. 2. Always wear gloves when working on chain. 3. Do not operate with a loose chain. (A): Proper tension (B): Improper tension • Tighten both nuts with the bar nose held up.
24 CS-4400 E N G L I S H D E U T S C H I T A L I A N O CHAIN LUBRICANT Proper lubrication of the chain while in operation reduces the friction between the chain and the guide bar to a minimum and assures a longer life time. Use only special chain oil of high quality for this purpose.
25 CS-4400 E N G L I S H D E U T S C H I T A L I A N O STARTING THE COLD ENGINE • Fill the fuel tank with fuel mixture. It is not permitted to fill fuel above the shoulder level of fuel tank. • Fill the chain oil tank with lubricant. • Lift ignition switch up.
26 CS-4400 E N G L I S H D E U T S C H I T A L I A N O WHEN THE ENGINE IS HARD TO START • Lift ignition switch up and pull choke control knob all the way out. • Press throttle trigger lockout down while holding throttle trigger and push in throttle latch as shown.
27 CS-4400 E N G L I S H D E U T S C H I T A L I A N O STARTING THE WARM ENGINE • Confirm there is fuel and chain oil in the tanks. • Lift ignition switch up. • Pull starter handle. • Choke may be used if necessary, but be sure to push it back on first firing sound.
28 CS-4400 E N G L I S H D E U T S C H I T A L I A N O STOPPING THE ENGINE • Release throttle trigger and push ignition switch down. 1. Ignition switch ANHALTEN • Gashebel loslassen und Zündschalter nach unten stellen. ANMERKUNG Wenn der Motor nicht anhält, den Choke-Knopf ganz herausziehen, um den Motor anzuhalten.
29 CS-4400 E N G L I S H D E U T S C H I T A L I A N O WARNING DANGER MAKE SURE THAT THE ENGINE IS SHUT OFF WHEN CHECKING CHAIN TENSION. CHECKING CHAIN TENSION • Chain tension should be checked frequently during work and corrected if necessary. • Tension the chain as tight as possible, but so it can still be pulled easily along the bar by hand.
30 CS-4400 E N G L I S H D E U T S C H I T A L I A N O CORRECT USE OF CHAIN BRAKE WARNING DANGER KICKBACK MOTION IS VERY HAZARDOUS. IF THE TIP OF THE BAR TOUCHES WOOD OR THE LIKE, THE GUIDE BAR KICKS BACK IN AN INSTANT. THE CHAIN BRAKE REDUCES THE POSSIBILITY OF INJURY DUE TO KICKBACK.
31 CS-4400 E N G L I S H D E U T S C H I T A L I A N O NON-MANUAL CHAIN BRAKE The non-manual chain brake stops the operation of the saw chain in such a manner that the kickback action produced at the end of the guide bar non-manually actuates the chain brake.
32 CS-4400 E N G L I S H D E U T S C H I T A L I A N O NOTE • For practice, while cutting a small tree, push the front guard forward to engage the brake. • At all times, confirm whether the brake works properly before each task. • If the chain brake is clogged with wood chips, function of the brake deteriorates a little.
33 CS-4400 E N G L I S H D E U T S C H I T A L I A N O CUTTING INSTRUCTION GENERAL In all circumstances the operation of the chain saw is a one-man job. It is difficult at times to take care of your own safety, so don’t assume the responsibility for a helper as well.
34 CS-4400 E N G L I S H D E U T S C H I T A L I A N O WARNING DANGER DO NOT LET THE NOSE OR TIP OF THE GUIDE BAR TOUCH ANYTHING WHILE ENGINE IS RUNNING TO AVOID KICKBACK. ACHTUNG GEFAHR ACHTEN SIE DARAUF, DASS DIE SPITZE DER KETTENSCHIENE BEI LAUFENDEM MOTOR NICHTS BERÜHRT, UM DEN RÜCKSCHLAG ZU VERMEIDEN.
35 CS-4400 E N G L I S H D E U T S C H I T A L I A N O FELLING A TREE A falling tree can seriously damage anything it may hit - a car, a house, a fence, a power-line or another tree. There are ways to make a tree fall where you want it, so first decide where that is! Before cutting, clear the area around the tree.
36 CS-4400 E N G L I S H D E U T S C H I T A L I A N O LIMBING Limbing a fallen tree is much the same as bucking. Never remove a limb from a tree while it is supporting your weight. Be careful of the tip touching other limbs. Always use both hands. Don’t cut with the saw overhead or the bar in a vertical position.
37 CS-4400 E N G L I S H D E U T S C H I T A L I A N O CAUTION Do not touch hot surfaces of cylinder cover and silencer after you used the chain saw. TENSION AND COMPRESSION IN TIMBER A length of timber lying on the ground will be subject to tension and compression, depending at which points the major support is.
38 CS-4400 E N G L I S H D E U T S C H I T A L I A N O Seitenansicht Kerbe 1/3 Höhe Fällschnitte 2.5 bis 5 cm Bild A Keile Draufsicht Scharnier 1/10 des Baumdurchmesser Kerbschnitte Fällschnitte F.
39 CS-4400 E N G L I S H D E U T S C H I T A L I A N O BÄUME ENTASTEN Das Entasten eines gefallenen Baums ist ähnlich wie das Zerkleinern. Niemals einen Baum entasten, auf dem sie stehen. Achten Sie darauf, dass die Spitze keine anderen Äste berührt.
40 CS-4400 E N G L I S H D E U T S C H I T A L I A N O VORSICHT Wenn Sie die Auswirkungen von Zug und Druck falsch einschätzen und von der falschen Seite aus sägen, verklemmt sich die Schneideinheit im Holz. Wenn Sie mit eingeklemmter Schneideinheit Gas geben, verbrennt die Kupplung.
41 CS-4400 E N G L I S H D E U T S C H I T A L I A N O ABBATTIMENTO DI UN ALBERO Un albero abbattuto può danneggiare gravemente qualsiasi cosa colpisca: un’automobile, una casa, una palizzata, un cavo dell’elettricità o un altro albero.
42 CS-4400 E N G L I S H D E U T S C H I T A L I A N O SRAMATURA La sramatura di un albero abbattuto è molto simile al taglio del tronco in pezzi più piccoli. Non effettuate mai la sramatura stando sopra l’albero. Fate attenzione che la punta non tocchi altri rami.
43 CS-4400 E N G L I S H D E U T S C H I T A L I A N O Supporto sotto il tronco Fate un taglio angolare quando una sezione potrebbe andare a finire contro l’altra “Cerniera” “Cerniera” “Ce.
44 CS-4400 E N G L I S H D E U T S C H I T A L I A N O PARTE MANUTENZIONE PAGINA PRIMA DELL’USO OGNI MESE Filtro aria Pulire/sostituire 49 • Filtro carburante Ispezionare/pulire/sostituire 50 • .
45 CS-4400 E N G L I S H D E U T S C H I T A L I A N O No fuel at carburettor No fuel at cylinder Silencer wet with fuel No spark at end of plug wire No spark at plug Remedy • Clean or replace • C.
46 CS-4400 E N G L I S H D E U T S C H I T A L I A N O Problem Motor - springt nicht leicht an Ursache Abhilfe - springt gar nicht an Motor lässt Kraftstoff am Kein Kraftstoff • Kraftstoffilterelem.
47 CS-4400 E N G L I S H D E U T S C H I T A L I A N O Guasto Motore - avviamento difficile Causa Rimedio - non si avvia Motore Carburante al Niente • Filtro carburante ostruito • Pulire o sostitu.
48 CS-4400 E N G L I S H D E U T S C H I T A L I A N O T: Idle speed adjuster L: Low speed mixture adjuster H: High speed mixture adjuster T: Leerlaufdrehzahleinstellung L: Leeraufgemischeinstellung H: Volllastgemischeinstellung SER VICE CARBURETTOR • Do not adjust the carburettor unless necessary.
49 CS-4400 E N G L I S H D E U T S C H I T A L I A N O CHECK FUEL SYSTEM • Check before every use. • After refuelling, make sure fuel does not leak or exude from around fuel pipe, fuel grommet or fuel tank cap. • In case of fuel leakage or exudation there is a danger of fire.
50 CS-4400 E N G L I S H D E U T S C H I T A L I A N O 2. Oil filter OIL FILTER • Check periodically. - Do not allow dust to enter oil tank. - A clogged oil filter will affect the normal lubricating system. - Pick it up through oil filling hole with a piece of steel wire or the like.
51 CS-4400 E N G L I S H D E U T S C H I T A L I A N O 1. Groove 2. Oil hole GUIDE BAR • Clean before using. - Clean the groove of the guide bar with a small screw driver, for example. - Clean oil holes with a wire. • Reverse guide bar periodically.
52 CS-4400 E N G L I S H D E U T S C H I T A L I A N O 0.6 - 0.7 mm SPARK PLUG • Check periodically. - The standard spark gap is 0.6 to 0.7 mm. - Correct the spark gap if it is wider or narrower than the standard gap. • Fastening torque: 15 to 17 N · m (150 to 170 kgf · cm) ZÜNDKERZE • Von Zeit zu Zeit überprüfen.
53 CS-4400 E N G L I S H D E U T S C H I T A L I A N O MAGNETO • The unit has CDI (Capacitor Discharge Ignition) system, which does not require adjustment of ignition timing. • Check for secure (tight) wire connections. CYLINDER FINS • Check periodically.
54 CS-4400 E N G L I S H D E U T S C H I T A L I A N O SA W CHAIN MAINTENANCE Never operate a chain saw with a dull or damaged chain. If the chain requires excessive pressure to cut or produces dust instead of wood chips then inspect the cutters for damage.
55 CS-4400 E N G L I S H D E U T S C H I T A L I A N O 1. Lock the chain - push hand guard forward. To rotate the chain - pull hand guard against front handle. 2. Your chain will have alternative left and right hand cutters. Always sharpen from the inside out.
56 CS-4400 E N G L I S H D E U T S C H I T A L I A N O 1 3 4 5 • Drive link serves to remove sawdust from the groove of the guide bar. Therefore, keep the lower edge of the drive link sharp, indicated as 5. - When setting of the chain is finished, soak it in oil and wash away filings completely before using.
57 CS-4400 E N G L I S H D E U T S C H I T A L I A N O ST ORA GE LONG TERM STORAGE (Over 30 days) WARNING DANGER DO NOT STORE IN AN ENCLOSURE WHERE FUEL FUMES MAY ACCUMULATE OR REACH AN OPEN FLAME OR SPARK.
58 CS-4400 E N G L I S H D E U T S C H I T A L I A N O NOTE • For future reference, you should keep this operator’s manual. • If this operator’s manual has become illegible through impairment or is lost, please purchase a new one from your ECHO dealer.
59 CS-4400 E N G L I S H D E U T S C H I T A L I A N O SPECIFICA TIONS GB Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.
60 CS-4400 E N G L I S H D E U T S C H I T A L I A N O TECHNISCHE D A TEN D CS-4400 Außenabmessungen : Länge × Breite × Höhe mm 398 × 252 × 272 Maße : Säge ohne Führungsschien und Kette, bei leeren Tanks kg 4.
61 CS-4400 E N G L I S H D E U T S C H I T A L I A N O SPECIFICHE I Le specifiche, le descrizioni e il materiale illustrativo in questo manuale sono aggiornati alla loro pubblicazione, ma possono subire modifiche senza preavviso. Le illustrazioni possono raffigurare accessori a richiesta, e non includere tutti gli accessori standard.
62 CS-4400 E N G L I S H D E U T S C H I T A L I A N O DICHIARAZIONE DI CONFORMIT À “CE” II produttore sottoscritto: KIORITZ CORPORA TION 7-2 SUEHIROCHO 1-CHOME OHME ; TOKY O 198-8711 GIAPPONE di.
63 CS-4400 E N G L I S H D E U T S C H I T A L I A N O EG-K onf ormitätserklärung Wir als Hersteller: KIORITZ CORPORA TION 7-2 SUEHIROCHO 1-CHOME OHME ; TOKY O 198-8711 J AP AN erklären, dass das n.
64 CS-4400 E N G L I S H D E U T S C H I T A L I A N O Gewährleistungs- und Garantiebestimm un gen für ECHO- Motorgeräte Verehrter Kunde ! Sie haben sich zum Kauf eines ECHO-Motorgerätes entschieden und damit einen qualitativ hochwertigen und zuverlässigen Helfer für ihre Arbeiten erworben.
65 CS-4400 E N G L I S H D E U T S C H I T A L I A N O MEMORANDUM.
66 CS-4400 E N G L I S H D E U T S C H I T A L I A N O MEMORANDUM.
67 CS-4400 E N G L I S H D E U T S C H I T A L I A N O MEMORANDUM.
7-2 SUEHIROCHO 1-CHOME, OHME, TOKYO 198-8711, JAPAN PHONE: 81-428-32-6118. FAX: 81-428-32-6145. X750-006 47 2 X750 319-530 2 D I GB © 2004 Printed in Japan 0603D 0321 ES.
An important point after buying a device Echo CS-4400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Echo CS-4400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Echo CS-4400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Echo CS-4400 you will learn all the available features of the product, as well as information on its operation. The information that you get Echo CS-4400 will certainly help you make a decision on the purchase.
If you already are a holder of Echo CS-4400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Echo CS-4400.
However, one of the most important roles played by the user manual is to help in solving problems with Echo CS-4400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Echo CS-4400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
