Instruction/ maintenance manual of the product CXA240 EAW
Go to page of 2
Part No. SW0142 Rev . B 07/07 DESCRIPTION The CXA240 is a single channel po wer amplier designed for continuous duty in speech, music, pag ing, and sound reinfor cement applications demanding high performance, exible features , and rugged dependability .
Part No. SW0142 Rev . B 07/07 PERFORMANCE Inputs (balanced / unbalanced) Sensitivity Impedance 1 V 10k ohm Output Maximum Load Impedance Low Z 240 W 4 ohm High Z 70 V / 100 V 21 ohm / 42 ohm Operating Range (+/-3 dB) Main In to Amp Out 50 Hz to 15 kHz Noise Main In to Amp Out >75 dB (below maximum output) Distortion (THD, 240 W @ 1 kHz) <0.
An important point after buying a device EAW CXA240 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EAW CXA240 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EAW CXA240 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EAW CXA240 you will learn all the available features of the product, as well as information on its operation. The information that you get EAW CXA240 will certainly help you make a decision on the purchase.
If you already are a holder of EAW CXA240, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EAW CXA240.
However, one of the most important roles played by the user manual is to help in solving problems with EAW CXA240. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EAW CXA240 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
