Instruction/ maintenance manual of the product Powerware 5110 1000i Eaton
Go to page of 14
P ow erware 51 1 0 UPS User’ s manual.
©20 05 Eaton Corporation All Rights Reserved The contents of this manual are the copyright of the publisher and may not be reproduced (even extracts) unless permission granted. Every care has been taken to ensure the accuracy of the information contained in this manual, but no liability can be accepted for any er ror s or omission.
P ow erware 51 1 0 UPS U ser ’ s manua l 1 023922 Revision A Contents Introduction ................................................................................................. 4 Features: ........................................................
User ’ s manual 350 - 1500 V A 4 1 023922 Revision A Intr oduction The Powerw are 51 10 uninter ruptible power system (UPS) fi lter s the input line from line disturbances and protects your sensitive electronic equipment from fi ve common power problems suc h as power failures, power sags, power surges, over -voltage and under - voltage.
User ’ s manual 350 - 1500 V A 5 1 023922 Revision A S afety Instructions A TTENTION Maintenance, other than bat tery replacement must be performed b y a qualifi ed technician.
User ’ s manual 350 - 1500 V A 6 1 023922 Revision A Bat tery connection req uired before use! Connecting the Bat tery: Principal shown below for detailed information how to connect please refer to bat tery replacement section. Installation and Operation: Following steps explain how to connect and operate the P owerware 51 1 0 UPS.
User ’ s manual 350 - 1500 V A 7 1 023922 Revision A T ypical applications Indicator s 1 . On/Of f/T est Switc h One switc h controls power to your equipment and performs a self-test to detect overload/underc harge. T urn on the UPS. Press and hold the switc h for more than one second and release the switch af ter the beep.
User ’ s manual 350 - 1500 V A 8 1 023922 Revision A 2. Normal mode (Green)LED Indicates the UPS is providing mains power to your equipment. When the LED is blinking the UPS is providing power from the bat tery . 3. Fault (Red)LED When blinking, LED could indicate an overload condition or that the bat tery should be replaced.
User ’ s manual 350 - 1500 V A 9 1 023922 Revision A Indicator table Status Indicators The UPS provides both visual and audible status indicators. Visual indicators consist of three LEDs to represen.
User ’ s manual 350 - 1500 V A 1 0 1 023922 Revision A 5Ah batteries (350V A, 50 0V A models) 7Ah x 1 battery (700V A models).
User ’ s manual 350 - 1500 V A 1 1 1 023922 Revision A 7 Ah x 2 batteries (1 0 0 0 V A models), 9 Ah x 2 batteries (1500 V A models).
User ’ s manual 350 - 1500 V A 12 1 023922 Revision A T roubleshooting Symptom Possible Cause Action to T ake Powerware 5110 UPS will not turn on. UPS is not turned on or battery is not connected. Switch on the ON/OFF switch. If the power is not present, please make sure your circuit breaker on the building is not accidentally turned off.
User ’ s manual 350 - 1500 V A 13 1 023922 Revision A Specifi cation*: 230V Models Model 5110 350i USB 5110 500i USB 5110 700i USB 5110 1000i USB 5110 1500i USB Capacity 350V A / 210W 500V A / 300W.
User ’ s manual 350 - 1500 V A 1 4 1 023922 Revision A S er vice and Suppor t For questions and/or problems, please call your local distributor or the help desk at one of the following telephone numbers and ask for a UPS technical representative. United States: 1 .
An important point after buying a device Eaton Powerware 5110 1000i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eaton Powerware 5110 1000i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eaton Powerware 5110 1000i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eaton Powerware 5110 1000i you will learn all the available features of the product, as well as information on its operation. The information that you get Eaton Powerware 5110 1000i will certainly help you make a decision on the purchase.
If you already are a holder of Eaton Powerware 5110 1000i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eaton Powerware 5110 1000i.
However, one of the most important roles played by the user manual is to help in solving problems with Eaton Powerware 5110 1000i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eaton Powerware 5110 1000i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
