Instruction/ maintenance manual of the product XJ-300 FR Earthquake Sound
Go to page of 20
User’s Manual Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com XJ-300 FR 2 Channel or Monoblock Class “J” Amplifier.
2 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Earthquake Sound Corporation 2727 McCone Avenue Hayward, CA 94545 Tel: 510-732-1000 Fax: 510-732-1095 Customer Support tech@earthquakesound.com Tel: 800-576-7944 Fax: 510-732-1095 © 2011 Earthquake Sound Corporation.
XJ-300FR Manual 3 Specifications are subject to change without notice Safety Instructions 1) Read these instructions in their entirety. 2) Store this manual and packaging in a safe place. 3) Heed all warnings. 4) Follow instructions (do not take short cuts).
4 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Unpacking System Components • Keep the original carton and packing materials for future shipment or storage. • Check for any visual signs of damage. If you encounter any concealed damage, consult your Earthquake Sound dealer before proceeding with unit installation.
XJ-300FR Manual 5 Specifications are subject to change without notice Included in the Box 1 XJ-300FR Stereo Class “J” Amplifier 4 Short Mounting Ears 1 Bracket 4 Screws for the Bracket 1 Power Cord Introduction The XJ-300FR amplifier is an extremely versatile and modular amplifier.
6 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Front Features 3) Auto Music Sensing: Amplifier automatically turns on when it senses signal. 1) Power Switch: Switch to “ON” to turn on or to use the Auto on music sensing feature.
XJ-300FR Manual 7 Specifications are subject to change without notice 3) Auto Music Sensing: Amplifier automatically turns on when it senses signal. 4) Bypass/Lowpass: Set to Bypass to use as a 2 channel or 2.1 channel amplifier. Set to Lowpass to use as a 1 channel or subwoofer amplifier.
8 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Back Features 1) RCA Inputs The most common audio input 1) RCA Inputs: If you are using the XJ-300FR as a mono block (1 channel amplifier), connect only the left (white) RCA terminal. Be sure the toggle switch is set to “RCA” in order to use this input.
XJ-300FR Manual 9 Specifications are subject to change without notice 4) Speaker Outputs: A) To use the XJ-300FR as a two channel amplifier, connect the right speaker to the R+ and R- terminals and the left speaker to the L+ and L- terminals.
10 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Mounting Options for 1 XJ-300FR The XJ-300FR also comes with four rubber feet to not damage the bottom in the instance that it simply sits on a shelf or cabinet. Then bolt to any vertical or horizontal surface.
XJ-300FR Manual 11 Specifications are subject to change without notice Linking 2 XJ-300FRs The XJ-300FR’s ingenious design lets the user link two amplifiers together depending on the desired channel set-up. 1) Match the bolts on the left side of one amp with the linking holes on the right side of the other amp.
12 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Mounting 2 XJ-300FRs Screw short mounting arms to the outer sides of the amplifiers so they are rack mountable.
XJ-300FR Manual 13 Specifications are subject to change without notice Connecting to a Subwoofer/Tactile Transducer Wiring with the THOR In-Wall Subwoofer Receiver/Processor + _ Wiring with the Q10B T.
14 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Connecting to Tactile Transducers Make sure the front toggle switch is set to “Low Pass” if connecting to a subwoofer or tactile transducer. Note: Wiring with 2 MQB-1 Tactile Transducers Receiver/Processor + _ + _ Do not wire 1 MQB-1 with the mono bridge setting.
XJ-300FR Manual 15 Specifications are subject to change without notice Wiring with the ROCK-on 2.1 channel system Series Wiring + _ + _ Connecting to Outdoor Speakers (cont.) Granite-52 Speakers Granite-10D Subwoofer + _ + _ Receiver/Processor Though 1 XJ-300FR is capable of powering the Granite 2.
16 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Connecting to SWAT 2.4 Wireless Transceiver SWAT 2.4 Wireless Receiver SWAT 2.4 Wireless Transmitter Music Source with audio output The XJ-300FR is optimized for use with the SWAT 2.4 Wireless Transceiver.
XJ-300FR Manual 17 Specifications are subject to change without notice Specifications Model No. XJ-300FR Output Power 8-ohm load: 2 x 110 WRMS 4-ohm load: 2 x 170 WRMS Mono Bridged: 8-ohm load: 170 WRMS 4-ohm load: 300 WRMS Frequency Response 20Hz - 20kHz THD 0.
18 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com 5 Year Limited Warranty Earthquake warrants the original purchaser that the speaker or amplifier (product) is free from defects in m.
XJ-300FR Manual 19 Specifications are subject to change without notice 5 Year Limited Warranty (cont.) • Bent casing, damaged finish on casing due to abuse, misuse, or improper frame or broken connections. • Fading, deterioration of components and finish due to improper exposure to elements.
The Sound That Will Move You. Earthquake Sound reserves the right to amend details of the specifications without notice. © Copyright Earthquake Sound Corporation Earthquake Sound Corporation 2727 McC.
An important point after buying a device Earthquake Sound XJ-300 FR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Earthquake Sound XJ-300 FR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Earthquake Sound XJ-300 FR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Earthquake Sound XJ-300 FR you will learn all the available features of the product, as well as information on its operation. The information that you get Earthquake Sound XJ-300 FR will certainly help you make a decision on the purchase.
If you already are a holder of Earthquake Sound XJ-300 FR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Earthquake Sound XJ-300 FR.
However, one of the most important roles played by the user manual is to help in solving problems with Earthquake Sound XJ-300 FR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Earthquake Sound XJ-300 FR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
