Instruction/ maintenance manual of the product PH2200W/4 Earthquake Sound
Go to page of 10
Earthquake Sound reserves the right to amend details of the specifications without notice. Copy righ t © Ea rthq uake S ound Corp orat ion Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545 • Phone: 510- 732-1000 Fax: 510-732-1095 The Sound That Will Move Y ou.
W ARRANTY CONTINUED ON NEXT P AGE 2 3 Earthquake Amplifiers are capable of generating high sound pressure levels. Y ou should exercise caution when operating these amplifier systems. Long term exposures to high levels of sound pressure will cause permanent damage to your hearing.
4 Specifications Are Subject T o Change Without Notice 5 Please keep this warranty information in your files for future reference if necessary . It is recommended that you stick your serial number here for future reference. SERIAL NUMBER SPECIFICA TIONS Model Channels PH800W/2 PH1000W/2 PH2200W/4 PH2000W/D1 PH5000W/D1 PH10000W/D1 PH2000W/D1.
6 7 PH800W/2 REM POWER Born In The USA FUSE CH2 GND BA T CH1 MONO SPEAKER Output Bypass 2 Gain Power Rca level input Speaker Level Input 1 2 1 1- 1+ 2- 2+ Bypass Protect 20Hz Filter Setting Crossover Frequency 5kHz C r o s s e d R C A l e v e l outputs, can be used to feed other amplifiers in the system.
PH1000W/2 30A Fuse S p e a k e r O u t p u t s Minimum 4 Ohm Mono The gain knob is not a volume control. It is designed to match the input level of the amp to the output level of the source unit. Over driving -clipping- the input stage of the amp will cause damage to the amplifier (Please refer to table for settings).
PH2200W/4 10 1 1 Signal Sensor: Remote ON/Auto ON feature (see page 5). T wo 30A Fuses Speaker Outputs Minimum 4 Ohm Mono The gain knob is not a volume control. It is designed to match the input level of the amp to the output level of the source unit.
PH2000W/ 1 D 12 13 V ariable 10dB boost at 40Hz. Perfect tool for high SPL scores. Full time low-pass variable filter 12dB/Oct slope, range from 50 to 300Hz Through output feeds other amplifiers in the audio system. NOT EFFECTED BY THE LOW- P ASS FIL TER.
PH5000W/ 1 D REM GND BA T The gain knob is not a volume control. It is designed to match the input level of the amp to the output level of the source unit. Over driving -clipping- the input stage of the amp will cause damage to the amplifier (Please refer to table for settings).
PH10000W/ 1 D The gain knob is not a volume control. It is designed to match the input level of the amp to the output level of the source unit. Over driving -clipping- the input stage of the amp will cause damage to the amplifier (Please refer to table for settings).
2 Ohms Minimum 10000 watts rated output Master Amplifier Audio signal Slave Amplifier Phase Shift 0 180 Phase Shift 0 180 Head Unit / audio source REM GND BAT REM GND BAT • Set master amp to 0 • S.
An important point after buying a device Earthquake Sound PH2200W/4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Earthquake Sound PH2200W/4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Earthquake Sound PH2200W/4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Earthquake Sound PH2200W/4 you will learn all the available features of the product, as well as information on its operation. The information that you get Earthquake Sound PH2200W/4 will certainly help you make a decision on the purchase.
If you already are a holder of Earthquake Sound PH2200W/4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Earthquake Sound PH2200W/4.
However, one of the most important roles played by the user manual is to help in solving problems with Earthquake Sound PH2200W/4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Earthquake Sound PH2200W/4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
