Instruction/ maintenance manual of the product ABF710MD AKAI
Go to page of 17
NOTE: The software cannot initialize when the device is plugged in and running slid e show . 1. Disconnect device USB cable from PC if it is connected.
Mac OS 10.4 NOTE: The software cannot initialize when the device is plugged in and running slid e show . ** Important: Install application software before connect device to PC. ** 1. Disconnect device USB cable from PC if it is connected. 2. Insert CD and follow the on-scree n instruction to install “Photo Viewer”.
ABF710 DIGITAL PHOTO FRAME.
Table of Contents 1 Table of Contents .............................................................................1 Important Safety Instructions ..........................................................2 Getting Started ............................
2 Important Safety Instructions WARNING: Do not expose this device to water or moisture. The device should be situated away from sources of high heat such as radiators or stoves. The device should be connected to a power supply only of the type described in the operating instructions or as marked on the unit.
1. LCD 2. SD/MMC/MS/XD Slot 3. Power DC IN Jack 4. SKIP-BACKWARD( ) 5. PHOTO/MUSIC: Use to switch between Music mode and photo mode. 6. SKIP-FORWARD( ) 7. ROTA TE/VOL-: Use to rotate the photo (photo mode) or decrease music volume (music mode). 8. SILDE SHOW /MUSIC ON/OFF 9.
4 Getting Started 1. Retractable keypad 2. Key holes for wall mount. 3. Stand screw hole 4. LOCK SLOT : for connection of lockable chain lock. 5. Power on/off indicating LED 6.
5 Getting Started Hang on the wall 1. Insert a screw into your desired spot on the wall. 2. Place one of the KEY HOLES ,depending on your desired orientation, over the screw and hang the Frame Frame. Placing the Photo Frame You can place this on a flat surface or hang it on the wall.
6 Getting Started Using the Key Pad To hide the key pad, simply push it back. To use the key pad, just pull it out all the way..
7 Getting Started Memory Cards 1. Insert the memory card into the slot , making sure that the metal contacts of the memory card is facing the front of the Frame. 2. T o remove, simply pull out the card. of the Photoframe SD/MS/MMC/XD Metal contacts on the memory card Insert the USB into the USB slot on the .
8 Getting Started This can be powered by AC through the supplied switching power AC adaptor. Connect the AC adaptor to your as illustrated below , There are two input sockets (DC 12V IN) for accepting the plug from AC adaptor . Photoframe Photoframe Note Always turn off the before connecting or disconnecting the AC cord.
9 Viewing Photos 1. Insert one end of the AC ADAPTER into DC IN, and the other end into an electrical outlet. 2. Slide ON /OFF to the "ON" position. The POWER INDICAT OR illuminates. 3. Adjust the screen brightness using the Brightness Adjustment Knob on the back of the frame.
Viewing Photos 10 Turning Off/On Background Music When in MUSIC mode, repeatedly press , to turn off and on the music. Adjusting Music V olume When in MUSIC mode, press to increase the volume and to decrease the volume.
11 Removing and Installing Decorative Frame Installing Decorative Frame Removing Decorative Frame 1. Insert the two anchor tabs on the top of main unit into the two matching holding slots of the decorative frame, making sure tabs are fully inserted. 2.
12 Connecting Locks/ Troubleshooting The has a receptacle (slot) to accept a locking cable to keep it secure in high-traf fic areas, such as in-store product demonstration. Photoframe Symptom Check No display No photos displayed while Memory Card or USB stick has been inserted.
13 Specifications Power Requirements Power Consumption Operating Temperature Range Input:100~240V AC Max 8W +10 C~ +40 C oo Operating Voltage JPEG MP3 IN: 100~240V AC OUT : 12V/1.25A 12 V DC SD/MMC/MS/XD card 2CH x 2W General Photo Formats Supported Audio Power Audio Formats Support: Compatible Memory Cards A.
Disposal of Used Electrical & Electronic Equipment The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste.
An important point after buying a device AKAI ABF710MD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AKAI ABF710MD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AKAI ABF710MD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AKAI ABF710MD you will learn all the available features of the product, as well as information on its operation. The information that you get AKAI ABF710MD will certainly help you make a decision on the purchase.
If you already are a holder of AKAI ABF710MD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AKAI ABF710MD.
However, one of the most important roles played by the user manual is to help in solving problems with AKAI ABF710MD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AKAI ABF710MD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
