Instruction/ maintenance manual of the product 2000LEM-7 Dynasty Spas
Go to page of 2
T emp Set (80°F - 1 04°F / 26°C - 40°C) The start-up temperature is set at 1 00°F/3 7 .5°C. The last measured temperatur e is constantly displa yed on the LCD. Note tha t the last measured spa tempera ture displayed is curren t only when the pump has been running for a t least 2 minutes .
P/N DC2LM7 1 04/28/2 00 3 W arning! Shock Hazard! No User Ser viceable P arts . Do not attempt ser vice of this contr ol sy stem. Contact yo ur d eal er or ser vice organization for assistance. F ollow all owner’s manual po wer connection instructions.
An important point after buying a device Dynasty Spas 2000LEM-7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynasty Spas 2000LEM-7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynasty Spas 2000LEM-7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynasty Spas 2000LEM-7 you will learn all the available features of the product, as well as information on its operation. The information that you get Dynasty Spas 2000LEM-7 will certainly help you make a decision on the purchase.
If you already are a holder of Dynasty Spas 2000LEM-7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynasty Spas 2000LEM-7.
However, one of the most important roles played by the user manual is to help in solving problems with Dynasty Spas 2000LEM-7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynasty Spas 2000LEM-7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center