Instruction/ maintenance manual of the product PD0502 Dynabrade
Go to page of 8
SAFETY INSTRUCTIONS Carefully Read all instructions before operating or servicing any Dynabrade ® Abrasive Power T ool. Products offered by Dynabrade are not to be modified, converted or otherwise altered from the original design without expressed written consent from Dynabrade, Inc.
T o T ool Station Closed Loop Pipe System (Sloped in the direction of air flow) Ball Valve Ball Valve Filter Regulator Lubricator Air Flow Drain Valve Drain Valve Air T ool Air Compressor and Receiver Drain Valve Air Hose 90 PSIG MAX (6.2 Bar) Air Flow Refrigerated Air Dryer Filter Regulator Lubricator 90 PSIG (6.
Maintenance Instructions Important: A preventative maintenance program is recommended whenever portable power tools are used. The program should include inspection of air supply lines, air line pressure, proper lubrication and repair of tools. See Preventative Maintenance Schedule on pg 7.
Right Angle Mini-Orbital Sander Complete Assembly Index K ey No. Part # Description 1 54088 Pad - Mdl: 58035 54018 Pad - Mdl: 58037 54031 Pad - Mdl: 58038 2 97175 Screw (4) 3 95615 Roloc ® Shell 4 30.
5 Disassembly / Assembly Instructions - Right Angle T ools Important: Manufacturer ’ s warranty is void if tool is disassembled before warranty expires. Please refer to parts breakdown for part identification. Motor Disassembl y: 1. Shut the air supply and disconnect the sander from the air supply hose.
Disassembly / Assembly Instructions - Right Angle T ools 6. Check the clearance between the rotor and the bearing plate with a .001 thick feeler gauge. Clearance should be .001” to .0015” (0.03-0.04mm). If it’s necessary , readjust clearance by repeating steps 3-5 with different thickness shims.
7 This service chart is published as a guide to expectant life of component parts. The replacement levels are based on average tool usage over one year .
Dynabrade Air Lube • Formulated for pneumatic equipment. • Absorbs up to 10% of its weight in water . • Prevents rust and formation of sludge. • Keeps pneumatic tools operating longer with greater power and less down time. 95842: 1 pt. (473 ml) 95843: 1 gal.
An important point after buying a device Dynabrade PD0502 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynabrade PD0502 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynabrade PD0502 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynabrade PD0502 you will learn all the available features of the product, as well as information on its operation. The information that you get Dynabrade PD0502 will certainly help you make a decision on the purchase.
If you already are a holder of Dynabrade PD0502, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynabrade PD0502.
However, one of the most important roles played by the user manual is to help in solving problems with Dynabrade PD0502. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynabrade PD0502 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
