Instruction/ maintenance manual of the product 57126 Dynabrade
Go to page of 4
P ar ts P age Reorder No . PD03•10 Eff ective F ebruar y , 2003 Supercedes PD02•47 Alwa ys operate, inspect and maintain this tool in accor dance with the Safety Code for portable air tools (ANSI B186.1) and any other applicable saf ety codes and regulations.
2 One Y ear W arranty Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service.
Motor Disassembly: 1. Disconnect the tool from the air supply . 2. Invert the tool and place the 57092 Repair Collar around the 02099 Housing and the 51361 Shroud, above the two handle bosses so that the back-up pad is facing up. 3. Use the 50679 Wrench (26mm) to remove the back-up pad.
Motor Assembly / Disassembly Instructions – 3" Dynabuffer (continued) 8. Use the larger end of the 57091 Bearing Press T ool to press the 57088 Bearing down to the top of the counter weight of the 57422 Motor Shaft Balancer . Also install the 51366 Bearing Plate in the same manner .
An important point after buying a device Dynabrade 57126 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynabrade 57126 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynabrade 57126 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynabrade 57126 you will learn all the available features of the product, as well as information on its operation. The information that you get Dynabrade 57126 will certainly help you make a decision on the purchase.
If you already are a holder of Dynabrade 57126, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynabrade 57126.
However, one of the most important roles played by the user manual is to help in solving problems with Dynabrade 57126. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynabrade 57126 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
