Instruction/ maintenance manual of the product DVD VCR Combo DVDO
Go to page of 15
062210 1 DVDO iScan Duo Owner’s Manual Supplement Firmware Version 2.20 (Build 067a) This document provides additional information for the DVDO iScan Duo configured with the latest firmware. It is a supplement to the iScan Duo Owner’s M anual. This release includes improvements/bug fixes in Releases 2.
062210 2 At each IRE setting, in addition to Red, Green and Blue, the on -screen menu includes White-x, White-y, White- Y adjustments. Ma in Menu > Output Setup > Gray Scale > White-x Ma in Menu > Output Setup > Gray Scale > White-y Ma in Menu > Output Setup > Gray Scale > White-Y 2.
062210 3 DVDO iScan Duo Owner’s Manual Supplement Firmware Version 2.10 (Build 062n) This document provides additional information for the DVDO iScan Duo configured with the latest firmware. It is a supplement to the iScan Duo Owner’s M anual. This release includes improvements/bug fixes in Release 2.
062210 4 The TPG automatically generates only the Red primary (75IRE). 5. Enter the measured Red-x value. Note the indicators reflect only the output of the Test Pattern Generator. 6. Select Red-y and enter the measured Red-y value 7. Repeat step 4,5 and 6 with Green-x and Green-y The TPG automatically generates only Green primary (75IRE).
062210 5 480i/240p (treated as one format) 576i/288p (treated as one format) 480 p 576p 720p50 720p60 1080i50 1080i60 1080p24 1080p25 1080p30 1080p50 1080p60 VGA SVGA XGA SXGA The input settings that .
062210 6 The Y/C Delay control shifts the phase of the luminance (Y) with r espect to chrominance (C) in the video signal to correct for delay between Y and C, which causes color smearing in the image. The default setting is 0. This co ntrol is available in the Picture Controls menu.
062210 7 Ma in Menu > Input Adjust > Input Color Space The menu selection is as follows Auto (default) RGB YCbCr 422 YCbCr 444 4.2 Input Colorimetr y This control is for HDMI inputs only.
062210 8 Off The iScan Duo turns off HDCP on its input. This feature speeds up the iScan Duo’s ability to lock onto an input signal when HDCP is not needed. 5. New Configur ation con trol A menu item was added to allow users to control the OSD display.
062210 9 6.2 Mask Level A mask is created when Underscan feature which reduces the output imag e size to less than the maximum display size. Typically Underscan is used if the image g oe s beyond the display. The mask level can be adjusted from 0 IRE (black) to 100 IRE (white) with a slider bar control.
062210 10 Input and Output HDCP modes Input Colorimetry Menu Timeout Menu Navigation More consistent factory default commands See Updated Serial Automation command docum ent for more details 8. Other Impr ovement s Added 1080p30 pre-defined output format .
062210 11 DVDO iScan Duo Owner’s Manual S upplement Date: 2/ 15 /10 Firmware Version: 2.00 Build 051 This document provides additional information for the DVDO iScan Duo co nfigured with the latest firmware. It is a supplement to the iScan Duo user manual.
062210 12 Note: This control is currently not updating the c hromaticity values in our input EDID Output Chromaticity Similarly, there are the Output Chromaticity controls which are required for accurate calibration.
062210 13 Using iScan Duo’s Test Pattern Generator 1. Enable test pat tern generator by pressing the ‘Test Pattern O n/Off’ button on the Duo’s remote or using the on -screen menu Output Setup > Test Patter ns > On. 2. Adjust primaries and white point using the on-screen menu.
062210 14 There are 2 ways to use this control. a) Using the iScan Duo’s test pattern generator as a reference so urce b) Using an external video source to generate the re ference test patterns Using iScan Duo’s Test Pattern Gener ator 1.
062210 15 2. Support for Audio only optical and coax sources This feature is for users who have digital audio only (coax and optical) source (i.e. no video source) and want to use it with Duo. Previously this feature is not available because the Duo goes into standby mode when there is no video i nput (auto standby - on).
An important point after buying a device DVDO DVD VCR Combo (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DVDO DVD VCR Combo yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DVDO DVD VCR Combo - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DVDO DVD VCR Combo you will learn all the available features of the product, as well as information on its operation. The information that you get DVDO DVD VCR Combo will certainly help you make a decision on the purchase.
If you already are a holder of DVDO DVD VCR Combo, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DVDO DVD VCR Combo.
However, one of the most important roles played by the user manual is to help in solving problems with DVDO DVD VCR Combo. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DVDO DVD VCR Combo along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
