Instruction/ maintenance manual of the product 8106B Dukane
Go to page of 26
DUKANE CORP A V SER VICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www .dukane.com/av Information in this Guide may change due to product improvements. T o obtain the latest manuals, literature, and software please visit the Dukane web site at; www .
.
1 ENGLISH Projector CP-A222WN/ 8105B , CP-A302WN/ 8106B , CP-AW252WN/8104WB User's Manual (concise) Thank you for purchasing this projector . Please read through this manual before using this product, in order to use safely and utilize well the product.
2 Fir st of all Entries and gr aphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. Impor tant safety instr uction The followings are important instructions for safely using the product.
3 ENGLISH R e gulator y notices About Electro-Ma gnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are.
4 Contents of pac ka ge Y our projector should come with the items shown below . Check that all the items are included. Require of your dealer immediately if any items are missing.
5 ENGLISH WARNING ►Install the projector in a stable horizontal position. ►Place the projector in a cool place, and ensure that there is sufficient ventilation. Keep a space of 30 cm or more between the sides of the projector and other objects such as walls.
6 Connecting with your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Refer to figures F-3 to F-5 at the back of this manual.
7 ENGLISH NOTE • If a loud feedback noise is produced from the speaker , move the microphone away from the speaker . • This projector doesn't support plug-in power for the microphone. • The COMPUTER IN1/2 port can support a component signal also.
8 Connecting pow er supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.
9 ENGLISH Using the cable co ver Utilize the cable cover as the guard and blind for the connecting parts. 1. Connect the signal cables and the power cord to the projector first. 2. Combine parts as shown in figure, and assemble the cable cover . 3 .
10 Preparing for the remote contr ol Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.
11 ENGLISH T ur ning on the power 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. 2. Make sure that the POWER indicator is steady orange. 3. Confirm that there is nothing that the lens door hits while opening.
12 Adjusting the projector's eleva tor The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project.
13 ENGLISH F ocusing Use the FOCUS + and FOCUS - buttons on the projector or remote control to adjust the screen focus. Selecting an aspect ratio Each time you press the ASPECT button on the remote control, it switches the aspect ratio of the image, in turn.
14 T ur ning of f the power 1. Press the ST ANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. 2. Confirm that there is nothing that the lens door hits while closing. Press the ST ANDBY/ON button again while the message appears.
15 ENGLISH R eplacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
16 HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE WARNING ► The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
17 ENGLISH The air filter has two kinds of filters inside. Please check and clean the air filter periodically . When the indicators or a message prompts you to clean the air filter , comply with it as soon as possible. If the filters are damaged or heavily soiled, replace them with the new ones.
18 Caring for the mir ror and lens If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of display quality . Please take care of the mirror and lens, being cautious of handling. 1. T urn the projector off and unplug the power cord from the power outlet.
19 ENGLISH Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User ’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requir ements The system for using the CD-ROM requires the following.
20 Item Specification Product name Liquid crystal projector Liquid Crystal Panel % , % : 786,432 pixels (1024 horizontal x 768 vertical) :% : 1,024,000 pixels (128.
21 ENGLISH T r oubleshooting - War ranty and after-ser vice If an abnormal operation (such as smoke, strange odor or excessive sound) should occur , stop using the projector immediately .
1 Screen size (diagonal) Projection distance Screen height b1 b2 c1 c2 type(inch) m m inch m inch m inch m inch 60 1.5 0.096 3.8 0.403 15.9 0.281 1 1.1 1.196 47.1 70 1.8 0.161 6.3 0.467 18.4 0.317 12.5 1.384 54.5 80 2.0 0.225 8.9 0.531 20.9 0.352 13.9 1.
2 F-3 F-4 VCR/DVD/Blu-ray Disc player Computer COMPONENT Cb/Pb Y Cr/Pr HDMI R L VIDEO S-VIDEO AUDIO OUT AUDIO OUT USB (A) DISPLA Y RS-232C HDMI Microphone system Speakers (with an amplifier) Monitor .
3 F-5 F-6 [unit: mm] 345 303 94 124 85 72 130 308 119 192 Access point Computer RS-232C LAN USB TYPE A USB wireless adapter (optional) USB storage device.
An important point after buying a device Dukane 8106B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dukane 8106B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dukane 8106B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dukane 8106B you will learn all the available features of the product, as well as information on its operation. The information that you get Dukane 8106B will certainly help you make a decision on the purchase.
If you already are a holder of Dukane 8106B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dukane 8106B.
However, one of the most important roles played by the user manual is to help in solving problems with Dukane 8106B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dukane 8106B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
