Instruction/ maintenance manual of the product XHD6425 Dual
Go to page of 28
INSTALLATION/OWNER'S MANUAL AM/FM/CD/MP3/WMA/USB/3.5mm Bluetooth ® Ready Receiver with Built-In HD Radio™ and Detachable Face XHD6425 R ®.
2 TYPICAL FRONT-LOAD DIN MOUNTING METHOD Please read entire manual before installation. Before You Start • Disconnect negative battery terminal.
3 FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XHD6425 uses one 10 amp ATM fuse located beside the wiring connector.
4 The XHD6425 allows playback of your favorite MP3 and WMA files recorded on CD-R and CD-RW discs. Its powerful on-board DSP processor decodes the compressed audio while maintaining near-CD sound quality.
5 XHD6425 OPERATION Control Locations - Remote Key 9/EQ Key 8/Scan Mute T alk/Redial Key 7 Preset 5/Folder Down Preset 4 Preset 1/Repeat Mode/Search Tune/Track Down Band/Play/Pause/Key * .
6 Faceplate Removal Semi-Permanent Faceplate Installation Power On/Off Mode Auxiliary Input Volume Programmable Turn-On Volume Mute Preset EQ Curves Reset Display General Operation XHD6425 OPERATION Press RELEASE and pull away from the left side to remove.
7 With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nn to adjust the hours and TUNE ll to adjust the minutes. Press DISP momentarily to save the selected time. Press and hold the rotary encoder for more than 3 seconds to access the setup menu.
8 XHD6425 OPERATION Press rotary encoder momentarily to select between Volume (default), Bass, Treble, Balance, & Fader. Press rotary encoder until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum).
9 XHD6425 OPERATION Analog and Digital Tuning Seek Tuning Manual Tuning Scan Tuning Storing and Recalling Station Presets The following tuning functions will access both analog and digital stations. Refer to the HD SEEK mode section on page 10 for instructions on tuning to only digital stations.
10 XHD6425 OPERATION Automatically Store Stations Preset Scan Band Display HD Seek Mode Press AS/PS for more than two seconds to automatically store the six strongest stations in the current band. Automatic local tuning is activated during initial band scan.
11 XHD6425 OPERATION Insert CD Eject CD Track Select Fast Forward and Reverse Pause Scan Repeat Random CD-R/CD-RW Compatibility With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback.
12 XHD6425 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc Displaying Information Title Icon Artist Icon Album Icon Folder Icon Character Support When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display.
13 XHD6425 OPERATION CD Player Operation - MP3/WMA Files Press SEARCH for more than 3 seconds, to select between the following modes: • Direct File Select • Alphanumeric File or Folder Search • File or Folder Navigate Press SEARCH for more than 3 seconds, then release.
14 XHD6425 OPERATION Press SEARCH for more than 3 seconds, then release. Press SEARCH again, an " * " will flash in the display. Use the buttons in the table on page 12 (32 character maximum input) or the rotary encoder to enter the desired alphanumeric search characters.
15 XHD6425 OPERATION CD Player Operation - MP3/WMA Files Navigating Note *Folder Access File Repeat File Repeat (Current Folder Only) Disc Random Folder Random.
16 XHD6425 OPERATION The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management).
17 XHD6425 OPERATION CD Player Operation - MP3/WMA Files An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only.
18 XHD6425 OPERATION USB Operation - MP3/WMA Files (Optional) Play MP3/WMA files from most mass storage devices by connecting them to the XHD6425's USB port. To connect a USB device, lift the protective cover to expose the USB port.
19 XHD6425 OPERATION USB Operation - MP3/WMA Files (Optional) Press SEARCH for more than three seconds, then release. "T*" will appear in the display. Use the rotary encoder to select the desired track number and press to confirm.
20 XHD6425 OPERATION Press INT for more than two seconds to play the first 10 seconds of each file in the current folder only. The icon will appear in the display. Press INT again to cancel. Note: File repeat (current folder only), folder random and folder intro are only available on USB devices with more than one folder.
21 Playback Capacity Additional MP3/WMA Information Sampling Frequency Rates MP3 WMA Transfer Bit rates MP3 WMA MP3 Tag Display USB Charging • Maximum number of files: 48896 .
22 Bluetooth ® Operation (Optional) Overview Connecting a Bluetooth device requires first connecting the Dual BTM60 module (sold separately). When connected to a Dual Bluetooth Ready head unit, the BTM60 supports the HFP (hands-free profile), A2DP (advanced audio distribution profile) and AVRCP (audio video remote control profile).
23 Bluetooth ® Operation (Optional) Function Description Making a Phone Call Press once. An "_" will appear on the display. Input the desired phone number using the 0-9, *, # buttons on the head unit front panel. Press to begin dialing.
24 Bluetooth ® Settings (Optional) Menu Function Options Action Bluetooth Mode BT ON Enables the BTM60 Bluetooth Interface Module (sold separately).
25 Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
26 Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (.
27 Specifications Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit Tuning range: 87.5MHz-108.1MHz Usable sensitivity: 8.
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2007 Dual Electronics Corp. All rights reserved. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries.
An important point after buying a device Dual XHD6425 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dual XHD6425 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dual XHD6425 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dual XHD6425 you will learn all the available features of the product, as well as information on its operation. The information that you get Dual XHD6425 will certainly help you make a decision on the purchase.
If you already are a holder of Dual XHD6425, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dual XHD6425.
However, one of the most important roles played by the user manual is to help in solving problems with Dual XHD6425. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dual XHD6425 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
