Instruction/ maintenance manual of the product XHD6420 Dual
Go to page of 20
INSTALLATION/OWNER'S MANUAL AM/FM/CD/MP3/WMA/3.5mm Receiver with Built-In HD Radio™ and Detachable Face XHD6420 R.
2 TYPICAL FRONT-LOAD DIN MOUNTING METHOD Please read entire manual before installation. Before You Start • Disconnect negative battery terminal.
3 XHD6420 INSTALLATION FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio.
4 The XHD6420 allows playback of your favorite MP3 and WMA files recorded on CD-R and CD-RW discs. Its powerful on-board DSP processor decodes the compressed audio while maintaining near-CD sound quality.
5 Faceplate Removal Semi-Permanent Faceplate Installation Power On/Off Mode Auxiliary Input Volume Programmable Turn-On Volume Mute Preset EQ Curves Reset Display General Operation XHD6420 OPERATION Press RELEASE and pull away from the left side to remove.
6 With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nn to adjust the hours and TUNE ll to adjust the minutes. Press DISP momentarily to save the selected time. Press and hold the rotary encoder for more than 3 seconds to access the setup menu.
7 XHD6420 OPERATION Press rotary encoder momentarily to select between Volume (default), Bass, Treble, Balance, & Fader. Press rotary encoder until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum).
8 XHD6420 OPERATION Analog and Digital Tuning Seek Tuning Manual Tuning Scan Tuning Storing and Recalling Station Presets The following tuning functions will access both analog and digital stations. Refer to the HD SEEK mode section on page 10 for instructions on tuning to only digital stations.
9 XHD6420 OPERATION Automatically Store Stations Preset Scan Band Display HD Seek Mode Press AS/PS for more than two seconds to automatically store the six strongest stations in the current band. Automatic local tuning is activated during initial band scan.
10 XHD6420 OPERATION Insert CD Eject CD Track Select Fast Forward and Reverse Pause Scan Repeat Random CD-R/CD-RW Compatibility With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback.
11 XHD6420 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc Displaying Information Title Icon Artist Icon Album Icon Folder Icon Character Support When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display.
12 XHD6420 OPERATION CD Player Operation - MP3/WMA Files Press SEARCH for more than 3 seconds, to select between the following modes: • Direct File Select • Alphanumeric File or Folder Search • File or Folder Navigate Press SEARCH for more than 3 seconds, then release.
13 XHD6420 OPERATION Press SEARCH for more than 3 seconds, then release. Press SEARCH again, an " * " will flash in the display. Use the buttons in the table on page 12 (32 character maximum input) or the rotary encoder to enter the desired alphanumeric search characters.
14 XHD6420 OPERATION CD Player Operation - MP3/WMA Files Navigating Note *Folder Access File Repeat File Repeat (Current Folder Only) Disc Random Folder Random .
15 XHD6420 OPERATION The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management).
16 XHD6420 OPERATION CD Player Operation - MP3/WMA Files An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only.
17 XHD6420 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
18 XHD6420 OPERATION Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connection.
19 XHD6420 OPERATION Specifications Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit Tuning range: 87.5MHz-108.
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2007 Dual Electronics Corp. All rights reserved. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries.
An important point after buying a device Dual XHD6420 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dual XHD6420 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dual XHD6420 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dual XHD6420 you will learn all the available features of the product, as well as information on its operation. The information that you get Dual XHD6420 will certainly help you make a decision on the purchase.
If you already are a holder of Dual XHD6420, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dual XHD6420.
However, one of the most important roles played by the user manual is to help in solving problems with Dual XHD6420. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dual XHD6420 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
