Instruction/ maintenance manual of the product XDVD710 Dual
Go to page of 60
INSTALLATION/OWNER’S MANUAL DVD Multimedia Receiver with 7” Touch Screen Display XDVD710 The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged.
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
2 DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD710 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc.
3 XDVD710 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving.
XDVD710 OPERATION 4 Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD710 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
5 Mounting sleeve opening dimensions 7-3/16” x 2-1/16” (183 mm x 53 mm) TYPICAL FRONT-LOAD DIN MOUNTING METHOD Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions.
6 Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. Rear view camera A rear view camera (not included) can be used with the CAMERA input. NEED HELP?? Call our Technical Service Hotline, 1-866-382-5476.
7 Wiring Diagram - Optional A/V Connections XDVD710 INSTALLATION.
XDVD710 OPERATION 8 IR Remote Preparation Notes: Remove the battery if the remote will not be used for a month or longer Remove and dispose of battery properly • • To first use the IR Remote contr.
9 XDVD710 OPERATION 15 7 1 2 4 5 Band Auto Store/Preset Scan Secondary LCD Display Open/Close Monitor Eject Rotary Encoder/Enter Mode 1 2 3 4 5 6 7 8 Play/Pause/Scan Stop Chapter/Track Up Chapter/Track Down Fast Forward Fast Reverse Mute Power/Volume 9 10 11 12 13 14 15 14 13 12 11 10 9 8 16 This model incorporates a motorized moving monitor.
10 XDVD710 OPERATION Control Functions - Monitor Closed Press BAND to increment from FM1, FM2, FM3, AM1 ] FM1. Press AS/PS momentarily to start station PRESET SCAN function, Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND .
11 XDVD710 OPERATION Disc-in indicator - Red = Disc inserted, White = No disc. ANGLE - Press to decrease the monitor view angle. ANGLE - Press to increase the monitor view angle. INFO - Press to select DVD INFO and press and hold for BRIGHTNESS .
XDVD710 OPERATION 12 White = No disc Red = Disc inserted Press ANGLE to increase the monitor view angle. Press ANGLE to decrease the monitor view angle. Notes: • Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only.
XDVD710 OPERATION 13 Mode Mute Open/Close Power Key #1 Key #2 Key #3 Volume Up Key #4 Key #5 Key #6 Volume Down Key #7 Key #8 Key #9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Info Search Key #0 Band/Stop Au.
XDVD710 OPERATION 14 Control Functions - Remote Mode Mute Open/Close Power Keys 0-9 Volume Up Volume Down Info Search Band/Stop Audio Select Escape 4-Way -Up/Down/Left/Right Menu Picture Ok Repeat A-B.
XDVD710 OPERATION 15 Power On/Off Monitor Open/Close Monitor Angle Position Press POWER momentarily to turn the unit on, the unit will beep 2 times. Press and hold POWER for more than 2 seconds, unit will beep 1 time, then turn off. Note: EJECT will still function even if POWER is off.
XDVD710 OPERATION 16 Mode Optional Mode Selection Volume Mute Audio Adjustment from front panel Audio Adjustment from Remote Press MODE to select between TUNER , DVD , AUX IN , XM, iPOD and CAMERA inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD .
XDVD710 OPERATION 17 INFO/PIC RGB BRIGHTNESS CVBS Screen Controls SHARPNESS CONTRAST COLOR BRIGHTNESS TINT Press INFO button for 1 second to display DVD disc information. Press and hold INFO for 2 seconds to change TFT LCD BRIGHTNESS: Press ANGLE to increase, ANGLE to decrease, or use VOLUME rotary to adjust the level up or down.
XDVD710 OPERATION 18 Press BAND to increment from FM1, FM2, FM3, AM1 ] FM1. Press AS/PS momentarily to start station PRESET SCAN function. The unit will now scan your program presets for 10 seconds for each preset in that band. Press AS/PS again to stop scanning.
XDVD710 OPERATION 19 Note: Secondary LCD only functions when TFT monitor is closed. LOCAL indicator, icon will be off when DISTANCE (DX) is selected STEREO radio station indicator Displays TRACK time,.
XDVD710 OPERATION 20 There are three methods to access the MAIN menu Press the ENTER button on the right ROTARY knob Press the MENU button on the remote control Touch the upper left corner of the touc.
XDVD710 OPERATION 21 GENERAL Setup - Menu Press the GENERAL button to access the GENERAL setup mode Select desired parameter you wish to change Page will return back to previous screen after 10 second.
XDVD710 OPERATION 22 Adjusting Radio Frequency Step 1 Step 2 Step 3 Step 4 Step 5 1) Touch top left corner of screen 2) Touch GENERAL setup button 3) Touch USA 4) Touch the setting for your region Tou.
XDVD710 OPERATION 23 GENERAL Setup - Adjusting the Clock 12Hr Clock Mode Step 1 Step 2 Step 3 Steps 4-8 24Hr Clock Mode 1) Touch top left corner of screen 2) Touch GENERAL setup button 3) Touch 00:00 .
XDVD710 OPERATION 24 XDVD710 OPERATION GENERAL Setup - Setting the Anti-theft code By default Anti-theft password is 0000 and is turned Off. To turn this feature on, follow the steps below. CAUTION!! This will lock your unit from operating if battery POWER is disconnected for more than 5 minutes.
XDVD710 OPERATION 25 Screen Setup Menu System Standby Press the SCREEN button to access the SCREEN setup mode Select desired parameter you wish to change Page will return back to previous screen after.
XDVD710 OPERATION 26 SCREEN Setup - Setting TFT Brightness This will set the default setting for the TFT display brightness. This can also be set by pressing the INFO button on the front TFT panel.
XDVD710 OPERATION 27 SCREEN Setup - Setting TFT Angle Set for best viewing angle in your vehicle Step 1 Step 2 Step 3 Step 4 Step 5 1) Touch top left corner of screen 2) Touch SCREEN setup button 3) T.
XDVD710 OPERATION 28 XDVD710 OPERATION SCREEN Setup - Touch Screen Calibration On occasion, the touch screen will have to be calibrated. Follow these steps as described.
XDVD710 OPERATION 29 Current MODE information, touch upper left area to return to MAIN MENU Current PRESET station indicator STEREO broadcast indicator Clock PRESET page up LOCAL/DISTANCE selection PR.
XDVD710 OPERATION 30 XDVD710 OPERATION AM/ FM Tuner Operation Press the button to auto SEEK up the next strongest station. Press the button to auto SEEK down the next strongest station. Press the button to manually tune up one step at a time. Press the button to manually tune down one step at a time.
XDVD710 OPERATION 31 WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving.
XDVD710 OPERATION 32 DVD Operation - Parking Brake Initialization Front TFT Video Initialization Parking Brake Initialization Situation 1 Parking Brake Initialization Situation 2 SAFETY WARNING • The video display of the in-dash unit will not operate while the vehicle is moving.
XDVD710 OPERATION 33 DVD Disc Symbols DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD710 plays discs according to their intentions, some functions may not work as intended.
XDVD710 OPERATION 34 DVD Operation - Inserting a Disc DVD Loading Slot Inserting a Disc Ejecting the Disc Resetting the Loading Mechanism When inserting a DVD disc, usually it will play automatically. Other sub-menus may have to be pressed to access the DVD movie/music content.
XDVD710 OPERATION 35 Hidden Touch Screen area while in TUNER mode Hidden Touch Screen areas while in DVD mode There are several hidden TOUCH SCREEN areas outlined below: "A" area can be used.
XDVD710 OPERATION 36 Using the hidden Touch Screen Controls A - Displays MAIN menu B - Displays DVD track information C - Selects PREVIOUS chapter D - Select NEXT chapter E - Displays the full DVD tra.
XDVD710 OPERATION 37 L Using the hidden Touch Screen Controls Touch AREA E 1) 2) 3) 4) 5) 6) 7) 8) 9) Touch the PLAY button or on the front panel to resume disc playback Touch the PAUSE button again t.
XDVD710 OPERATION 38 Notes: Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD710 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc.
XDVD710 OPERATION 39 Direct Chapter / Track Selection Viewing an Alternate picture Angle (DVD only) Multi-Language Disc Changing Subtitle Language DVD Playback Information Playback Information 1) 2) 3) 4) 5) 6) 7) During DVD and CD playback, you can use the numeric keypad on the remote control to access tracks directly.
XDVD710 OPERATION 40 With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu.
XDVD710 OPERATION 41 With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu.
XDVD710 OPERATION 42 With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu. Press RATING icon to select from the following menus: Press ---- to enter a password, then press Ok 1.
XDVD710 OPERATION 43 CD User Interface 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) Current MODE information, touch upper left area to return to MAIN MENU Disc title Track title Current .
XDVD710 OPERATION 44 Playing CD-DA discs Selecting by Keypad Selecting by Direct Track Access Previous/Next Page After inserting a CD disc, files will play in numerical order in the directory. Touch to display keypad. Enter desired track number and press ok.
XDVD710 OPERATION 45 MP3/WMA User Interface 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) Current MODE information, touch upper left area to return to MAIN MENU Disc title Track title.
XDVD710 OPERATION 46 Playing MP3/WMA files Selecting by Single Track Selecting by Direct Track Access Previous/Next Page After inserting an MP3/WMA disc, files will play in numerical order in the directory. Touch to display keypad. Enter desired track number and press ok.
XDVD710 OPERATION 47 The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW • CD-DA, DVD Video • MP3 data • WMA data The following types of discs/fi.
XDVD710 OPERATION 48 An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Onl y MP3 files with file nam e exte nsi on (.
XDVD710 OPERATION 49 iPod User Interface 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) Current MODE information, touch upper left area to return to MAIN MENU Artist name T.
XDVD710 OPERATION 50 Playing iPod files To select iPod mode, press the MODE button on the front panel, remote control, or press the iPod icon on the MAIN menu. Selecting by Keypad Selecting by Direct Song Access Previous/Next Page After connecting an iPod, files will play in numerical order in the directory.
XDVD710 OPERATION 51 Playing photo or video files from iPod Releasing Video control from iPod iPod will now reconnect • Touch VIDEO icon, iPod is now disconnected and waiting for video signal.
XDVD710 OPERATION 52 Selecting Music By: Playlist Artist Album Genre Song Rapid Dial Character Support iPod Compatibility Touch desired Folder, music will begin to play after selection.
XDVD710 OPERATION 53 Activating Your XM Tuner (when connected) 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 1. Press MODE to select XM Radio. 2. Verify channel 1 (XM Preview Channel) is playing. 3. Select Channel 0. The XM tuners' eight character Radio ID number will appear on the XDVD710 display.
XDVD710 OPERATION 54 Tuning Modes Channel Selection Storing and Recalling Preset Channels Direct Channel Selection Channel Search by Category Quick Select of Category Touch to select between XM, XM1. XM2 and XM3 bands. Touch momentarily to select the next available channel.
55 This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
XDVD710 OPERATION 56 Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper volta.
XDVD710 OPERATION 57 DVD Player FM Tuner AM Tuner Monitor General Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 24 Bit Tuning range: 87.
XDVD710 OPERATION 58 Notes.
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2006 Dual Electronics Corp. All rights reserved. NSA1106-V02.5 Printed in China.
An important point after buying a device Dual XDVD710 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dual XDVD710 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dual XDVD710 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dual XDVD710 you will learn all the available features of the product, as well as information on its operation. The information that you get Dual XDVD710 will certainly help you make a decision on the purchase.
If you already are a holder of Dual XDVD710, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dual XDVD710.
However, one of the most important roles played by the user manual is to help in solving problems with Dual XDVD710. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dual XDVD710 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
