Instruction/ maintenance manual of the product XDM7610 Dual
Go to page of 20
INSTALLATION/OWNER ’ S MANUAL AM/FM/CD/MP3/WMA Receiver with Detach Face XDM7610.
2 TYPICAL FRONT-LOAD DIN MOUNTING METHOD Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions.
3 FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDM7610 uses one 10 amp ATM fuse located beside the wiring connector.
4 Tune/Track Down Mode/Search Tune/Track Up Preset #2/Repeat Preset #1/Folder Down Open Volume Eject Preset #6/Folder Up *Key #7 EQ Audio/Setup Display 1 2 3 4 5 6 7 8 9 10 Mute Tuner Scan/*Key #8 *Ke.
5 XDM7610 OPERATION Control Locations - Remote EQ Open Display Preset #5 Preset #4/Intro Preset #1/Folder Down Mode/Search Tune/Track Down Band/Play/Pause 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .
6 The front panel is semi-permanently attached during assembly. Please refer to the separate yellow instructions (before installation) to make the front panel removable.
7 XDM7610 OPERATION General Operation - Setup Menu Menu Function Options Action Loudness Curve LOUD OFF Disables the loudness function. LOUD ON Enables the loudness function. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes.
8 Press AUDIO momentarily to select between Volume (default), Bass, Treble, Balance, Fader & Subwoofer. Press AUDIO until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Press AUDIO until TRE appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum).
9 Seek Tuning Manual Tuning Scan Tuning Band Storing and Recalling Station Presets Automatically Store Stations Preset Scan Press TUNE nn or TUNE ll momentarily to seek the next strong station. Press TUNE nn or TUNE ll for more than 2 seconds, then release.
10 Insert CD Eject CD Track Select Fast Forward and Reverse Pause Intro Repeat Random CD-R/CD-RW Compatibility With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Press EJECT to eject the CD.
11 XDM7610 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc MP3 Icon WMA Icon Folder Icon Displaying Information Character Support When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display. Depending on the number of files and folders, this may take several seconds.
12 XDM7610 OPERATION CD Player Operation - MP3/WMA Files Press SEARCH for more than 3 seconds, to select between the following modes: • Direct File Select • Alphanumeric File or Folder Search • File or Folder Navigate Press SEARCH for more than 3 seconds, then release.
13 Press SEARCH for more than 3 seconds, then release. Press SEARCH again, an " * " will flash in the display. Use the buttons in the table on page 12 (32 character maximum input) or the rotary encoder to enter the desired alphanumeric search characters.
14 CD Player Operation - MP3/WMA Files XDM7610 OPERATION Navigating Note *Folder Access File Repeat File Repeat (Current Folder Only) Disc Random Folder Random Disc Intro Folder Intro After navigating by direct select, alphanumeric search or file/folder navigate modes, the track number and elapsed time will be displayed by default.
15 The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management).
16 XDM7610 OPERATION CD Player Operation - MP3/WMA Files An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only.
17 XDM7610 WARRANTY Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
18 XDM7610 OPERATION Specifications Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.
19 Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Blac.
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2006 Dual Electronics Corp. All rights reserved. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries.
An important point after buying a device Dual XDM7610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dual XDM7610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dual XDM7610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dual XDM7610 you will learn all the available features of the product, as well as information on its operation. The information that you get Dual XDM7610 will certainly help you make a decision on the purchase.
If you already are a holder of Dual XDM7610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dual XDM7610.
However, one of the most important roles played by the user manual is to help in solving problems with Dual XDM7610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dual XDM7610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
