Instruction/ maintenance manual of the product SPT Dreamer Design
Go to page of 11
instruction manual committed to delivering quality and innovative products for you and your family Congratulations on your purchase of a D reamer Design Jogging Stroller .
Check to make sure you ha ve all the parts and necessary items needed to assemble the stroller . If you don't have something that is pictured please call our customer service line at 800.278.9626. introduction watch fingers when folding - folding mechanism could be a pinching hazard T urn the stroller over so the f oot plate is down.
foam protector T o put the rear wheels on, push the wheel axle into the stroller fr ame. R emove and discard the foam protectors on the wheel axles. be sure to discard the plastic bags from the wheels.
Starting at the bottom of the br ake pads, push the wheel up and in between the brak e pads. The quick release lever should be str aight out. While holding the lever , tighten the thumb nut until it is barely snug. The axle should not move side to side.
Make sure the seat str ap is snapped around the fr ame on both sides, by the basket. T o lock the hand brake, pull the lever in and hold it while you push the button down. As you hold the button down, release the br ake lever . Y our stroller comes with two parking brakes: a foot brak e and a hand brak e.
Y our canopy has multiple adjustments to fill all of your's and your child's needs. T o bring the canopy to it's next position, flip the mesh portion under . Use the canopy at it's fully extended position during midday sun to provide your child with the most amount of shade.
T o remove the sun canopy you will need a Phillips screwdriver to remove the screws from both sides of the canopy . Unsnap the canopy from the back and lift it out. Before washing the canopy , remove the fr ame. The canopy may be washed in cold water with mild detergent.
harness.
Y our stroller has many places to store your stuff . There is a pocket located on the back of the seat, as well as pockets for keys or a cell phone on both sides. There are also two water bottle holders located on the back of your stroller . storage Another place for stor age is the basket under the seat.
shift tire to right shift tire to left folding If you would lik e your stroller to fold more compactly , simply take the wheels off . Pull the latches on both sides of the frame and push down on the handle until the forks and the handle meet.
3 R eplace the brake pads when the grooves become worn awa y . Check all bolts are tight and springs are secure for rear foot br ake. Check fabric seams and str aps for fraying or tearing. K eep it out of the sun and in a dry place, when not in use, to prevent fading and mildew .
An important point after buying a device Dreamer Design SPT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dreamer Design SPT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dreamer Design SPT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dreamer Design SPT you will learn all the available features of the product, as well as information on its operation. The information that you get Dreamer Design SPT will certainly help you make a decision on the purchase.
If you already are a holder of Dreamer Design SPT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dreamer Design SPT.
However, one of the most important roles played by the user manual is to help in solving problems with Dreamer Design SPT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dreamer Design SPT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
