Instruction/ maintenance manual of the product AVR-3600DTS Dolby Laboratories
Go to page of 4
Dolby Digital AC-3 and Dolby Pro Logic / DTS Decoding (USA model only) / D·D·S·C-Digital (Dynamic Discrete Surround Circuit - Digital) / Full Discrete 5-channel Equal Power Amplifier / Built-in AC-.
Discrete Construction Chassis and Direct Signal Routing The interior of the chassis is divided to give separate compartments for the power amplifier , pre- amplifier , video circuit, digital cir cuit and power supply . This design prevents mutual inter ference and allows each section to perform at its full potential.
2 pairs of Front Speaker T erminals for Bi-Wiring The bi-wiring speaker terminal feature gives you high-quality performance with bi-wiring speaker systems through optimum connec t- ing configurations. In addition, you can connect two sets of conventional speakers, one for use in the main A/V room and the other in an additional room.
The First Name In Digital Audio 4 AVR-3 6 00 Power Amplifier Section Same quality amplifier for all 5-channel Rated output * THD figures are power amp stage values. Front 140 W + 140 W (8 ohms, 20Hz - 20 kHz, THD 0.05%) Center 140 W (8 ohms, 20Hz - 20 kHz, THD 0.
An important point after buying a device Dolby Laboratories AVR-3600DTS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dolby Laboratories AVR-3600DTS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dolby Laboratories AVR-3600DTS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dolby Laboratories AVR-3600DTS you will learn all the available features of the product, as well as information on its operation. The information that you get Dolby Laboratories AVR-3600DTS will certainly help you make a decision on the purchase.
If you already are a holder of Dolby Laboratories AVR-3600DTS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dolby Laboratories AVR-3600DTS.
However, one of the most important roles played by the user manual is to help in solving problems with Dolby Laboratories AVR-3600DTS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dolby Laboratories AVR-3600DTS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
