Instruction/ maintenance manual of the product 2011 Dakota Dodge
Go to page of 454
Chrysler Group LL C OWN E R’S MAN U AL 2011 2011 DAKOT A First Edition Printed in U.S.A. DAKOT A 11ND33-126-AB.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epr esents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
1 INTRODUCTION 5.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could r esult in a collision or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Locking Doors W ith A Key .............. 1 5 䡵 Steering Wheel Lock — If Equipped ........
▫ T o Lock The Doors .................... 2 2 ▫ Using The Panic Alarm ................. 2 3 ▫ General Information ................... 2 4 ▫ Programming Additional T ransmitters ...... 2 4 ▫ Battery Replacement ................... 2 4 䡵 Remote Starting System — If Equipped .
▫ Enhanced Seat Belt Use Reminder System (BeltAlert 威 ) ......................... 4 6 ▫ Seat Belts And Pregnant W omen .......... 4 7 ▫ Seat Belt Extender ..................... 4 7 ▫ Supplemental Restraint System (SRS) – Airbags ..........
A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your authorized dealer . Ask your authorized dealer for these numbers and keep them in a safe place.
NOTE: If you try to remove the key befor e you place the shift lever in P ARK, the key may become temporarily trapped in the ignition cylinder . If this occurs, rotate the key to the right slightly , then remove the key as de- scribed.
CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual T ransmission — If Equipped When the steering wheel is in the LOCK position, the steering and ignition systems are locked to pr ovide antitheft protection for your vehicle.
Locking Doors With A Key Y ou can insert the key into the door lock cylinder with either side up. T o lock the driver’s door , turn the key rearwar d. T o unlock the driver’s door , turn the key forward. For external door lock lubrication, r efer to “Maintenance Procedur es” in “Maintaining Y our V ehicle”.
The system uses ignition keys that have an embedded electronic chip (transponder) to pr event unauthorized vehicle operation. Therefor e, only keys that ar e pro- grammed to the vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if someone uses an invalid key to try to start the engine.
Replacement Keys NOTE: Only keys that are pr ogrammed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key 威 is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! Always remove the Sentry Keys 威 from the vehicle and lock all doors when leaving the vehicle unat- tended.
3. Insert the second valid key into the ignition switch. T urn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound. In addition, the V ehicle Security Light will begin to flash. T urn the ignition switch to the LOCK position and remove the second key .
T o Arm the System The V ehicle Security Alarm will set when you use the power door locks, or use the Remote Keyless Entry (RKE) transmitter to lock the doors.
NOTE: Y ou may accidentally activate the V ehicle Secu- rity Alarm (horn sounds and lights flash) by entering the vehicle without using the RKE transmitter to unlock the door(s).
REMOTE KEYLESS ENTR Y (RKE) This system allows you to lock or unlock the doors or activate the Panic Alarm from distances up to approxi- mately 66 ft (20 m) using a Remote Keyless Entry (RKE) transmitter . The RKE transmitter does not need to be pointed at the vehicle to activate the system.
3. Release both buttons at the same time. 4. T est the feature while outside of the vehicle by pr ess- ing the LOCK/UNLOCK button on the RKE transmitter . NOTE: Pressing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate the V ehicle Security Alarm.
NOTE: Pressing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate the V ehicle Security Alarm. Opening a door with the V ehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the V ehicle Security Alarm System.
T o cancel the Panic mode, press and release the P ANIC button on the RKE transmitter a second time. Panic mode will automatically cancel after three minutes, or if the vehicle is started and or exceeds 15 mph (24 km/h). During the Panic Mode, the door locks and RKE systems will function normally .
NOTE: Perchlorate Material – special handling may ap- ply . See www .dtsc.ca.gov/hazardouswaste/per chlorate 1. If the RKE transmitter is equipped with a screw , remove the scr ew . W ith the RKE transmitter buttons facing down, use a flat blade to pry the two halves of the RKE transmitter apart.
NOTE: The vehicle must be equipped with an auto- matic transmission to be equipped with Remote Start. How to Use Remote Start All of the following conditions must be met before the engine will remote .
NOTE: • The park lamps will turn on and remain on during Remote Start mode. • For security , power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter .
DOOR LOCKS Manual Door Locks All the doors can be manually locked from the inside by pushing down the door lock knob, located on the door trim panel. Both front doors may be opened fr om the inside with the door lock knob in the down or locked position.
Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door LOCK switch while the key is in the ignition, and any front door is open, the power locks will not operate.
3. Place the key into the ignition. 4. W ithin 10 seconds, cycle the key from the LOCK position to the ON/RUN position and back to LOCK position, a minimum of four times; ending in the LOCK position. (Do not start the engine.) 5. W ithin 30 seconds, press the driver’s door LOCK switch in the LOCK direction.
5. W ithin 30 seconds, press the driver’s door LOCK switch in the UNLOCK direction. 6. A single chime will sound to indicate the feature has been changed. 7. T o reactivate the featur e, repeat the above steps. 8. If a chime is not heard, program mode was canceled before the featur e could be changed.
T o use the system, open each rear door , slide the lever up to engage the locks, and down to disengage the child- protection locks. When the system on a door is engaged, that door can only be opened by using the outside door handle, even if the inside door lock is in the unlocked position.
WINDOWS Power Windows The control on the left fr ont door has up-down switches that give you finger-tip contr ol of all the power windows. There is a single opening and closing switch on the passenger doors for passenger window control.
W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle.
windows down or partially open. This is a normal occurrence and can be minimized. If the buf feting occurs with the rear windows open, open the fr ont and rear windows together to minimize the buffeting.
Please pay close attention to the information in this section. It tells you how to use your restraint system properly , to keep you and your passengers as safe as possible. W ARNING! In an accident, you and your passengers can suffer much greater injuries if you are not properly buckled up.
information on ALR, refer to “Automatic Locking Mode” in this section. The following chart defines the seating positions with this feature. Left Center Right First Row CRS Lock Second Row CRS Lock CRS Lock —I f Equipped CRS Lock If the passenger seating position is equipped with an ALR the proper fastening pr ocedure is as follows: 1.
W ARNING! (Continued) • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of an accident the best. W earing your belt in the wrong place could make your injuries in an accident much worse.
2. The seat belt latch plate is above the back of the front seat, next to your arm in the rear seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.
W ARNING! (Continued) • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in an accident, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
W ARNING! • A lap belt worn too high can increase the risk of internal injury in an accident. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt will not protect you properly .
Adjustable Upper Shoulder Belt Anchorage In the front and second r ow outboard seats, the shoulder belt can be adjusted upward or downwar d to help position the belt away from your neck. Pr ess the release button to release the anchorage, and then move it up or down to the position that fits you best.
NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This featur e allows the shoulder belt anchorage to be adjusted in the upward position without pushing the release button. T o verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position.
W ARNING! • A lap belt worn too loose or too high is dangerous. • A belt worn too loose can allow you to slip down and under the belt in a collision. • A belt that is too loose or too high will apply crash forces to the abdomen, not to the stronger hip bones.
How T o Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Re- tractor (ALR) feature or any other seat belt func- tion is not working properly when checked ac- cording to the procedures in the Service Manual.
1. W ith all doors closed, and the ignition switch in any position except ON/RUN or ST AR T , buckle the driver ’s seatbelt. 2. T urn the ignition switch to the ON/RUN position, (engine does not need to be running). W ait for the Seat Belt Reminder Light to turn off.
W ARNING! Using a seat belt extender when not needed can increase the risk of injury in an accident. Only use the seat belt extender when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat position.
• Supplemental Side Airbag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pr etensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors Advanced Front Airbag Features The Advanced Front Airbag system has multistage driver and front passenger airbags.
W ARNING! (Continued) • Do not mount any accessories to the knee bolster such as alarm lights, stereos, citizen band radios, etc. • Do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle.
W ARNING! (Continued) • Do not use accessory seat covers or place objects between you and the side airbags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury .
If a child from 1 to 12 years old (not in a r ear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child r estraint. (Refer to “Child Restraints”) Y ou should read the instructions pr ovided with your child restraint to make sur e that you are using it properly .
W ARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Airbag deployment could cause serious injury , including death. Air- bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
The side airbags will not deploy in all side collisions. Side airbag deployment will depend on the severity and type of collision. Because airbag sensors measure vehicle deceleration over time, vehicle speed and damage by themselves are not good indicators of whether or not an airbag should have deployed.
W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the airbag system immediately .
A quantity of non-toxic gas is generated to inflate the SABIC. The inflating SABIC pushes the outside edge of the headliner out of the way and covers the window .
If a Deployment Occurs The Advanced Front Airbags are designed to deflate immediately after deployment. NOTE: Front and/or side airbags will not deploy in all collisions.
W ARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and the front seat belt retrac- tor assemblies replaced by an authorized dealer im- mediately . Also, have the Occupant Restraint Con- troller (ORC) system serviced as well.
W ARNING! (Continued) • Do not attempt to modify any part of your airbag system. The airbag may inflate accidentally or may not function properly if modifications are made.
Event Data Recorder (EDR) This vehicle is equipped with an event data recor der (EDR). The main purpose of an EDR is to recor d, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems per- formed.
Child Restraints Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States, and all Canadian provinces, r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it.
Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and ⬙ convertible ⬙ child seats.
• The belt-positioning booster seat is for children weigh- ing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the seat cushion while the child’s back is against the seatback, they need a belt-positioning booster seat.
W ARNING! (Continued) • A rearward-facing infant restraint should only be used in a rear seat of a vehicle that does not have an airbag off switch. A rearward-facing infant restraint in the front seat may be struck by a deploying passenger airbag, which may cause se- vere or fatal injury to the infant.
• When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it fr om the vehicle. Do not leave it loose in the vehicle. In a sudden stop or accident, it could strike the occupants or seatbacks and cause serious personal injury .
Extended Cab • The Extended Cab right rear (if equipped with a r ear seat) passenger seating position has lower anchorages for LA TCH-equipped child restraints.
If your child restraints ar e not LA TCH-compatible, you can only install the child restraints using the vehicle’s seat belts. Refer to “Installing the LA TCH- Compatible Child Restraint System”.
strap. Forward-facing toddler r estraints, and some rear- facing infant restraints, will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage, and a means of adjusting the tension of the strap.
W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
In the rear seat, you may have tr ouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate fr om the buckle and twist the short buckle-end belt several times to shorten it.
W ARNING! (Continued) • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be seriously injured or killed. Make sure the child restraint tether strap is always routed through the proper anchor strap inner loop.
2. Route the tether strap across to the center tether anchorage. The center tether is located behind the slide door in the center of the vehicle, between the two seating positions. 3. Remove the slack in the tether strap so that the anchor strap is pulled tight.
NOTE: T wo anchors must be used for any of the three seating positions. W ARNING! An incorrectly anchored tether strap could lead to seat failure and injury to the child. In a collision, the seat could come loose and allow the child to crash into the inside of the vehicle or other passengers, or even be thrown from the vehicle.
ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not requir ed for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA. W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling contr ols to force outside air into the vehicle. Set the blower at high speed. If you are r equired to drive with the trunk/liftgate open, make sure that all windows ar e closed and the climate control BLOWER switch is set at high speed.
authorized dealer . If the light stays on, flickers, or comes on while driving, have the system checked by an autho- rized dealer . Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
W ARNING! (Continued) • Check mounting of mats on a regular basis. Al- ways properly reinstall and secure floor mats that have been removed for cleaning. • Always make sure that objects cannot fall into the driver foot well while the vehicle is moving.
Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately .
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 5 ▫ Inside Day/Night Mirror ................ 8 5 ▫ Automatic Dimming Mirror — If Equipped . . . 86 ▫ Outside Mirrors ...................... 8 6 ▫ Outside Mirrors Folding Featur e — If Equipped .
䡵 Seats .............................. 1 2 4 ▫ Power Driver Seat .................... 1 2 5 ▫ Manual Seat Adjustment ............... 1 2 8 ▫ Front Seat — Manual Recliner ........... 1 2 9 ▫ Manual Lumbar — If Equipped .......... 1 3 0 ▫ Heated Seats — If Equipped .
▫ T o Set a Desired Speed ................ 1 4 5 ▫ T o Deactivate ....................... 1 4 6 ▫ T o Resume Speed .................... 1 4 6 ▫ T o V ary The Speed Setting .............. 1 4 6 ▫ T o Accelerate For Passing .............. 1 4 7 䡵 Overhead Console .
▫ Reprogramming A Single HomeLink 威 Button ............................ 1 6 0 ▫ Security ........................... 1 6 0 ▫ T roubleshooting T ips .................. 1 6 0 ▫ General Information .................. 1 6 1 䡵 Electrical Power Outlets .
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror . The mirror should be adjusted to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle).
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated.
W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object.
T o adjust a mirror , turn the control wand towar d the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirr or to move. When you are finished adjusting the mirr or , turn the control to the center position to pr event accidentally moving a mirror .
NOTE: The Uconnect™ Phone requir es a mobile phone equipped with the Bluetooth 威 “Hands-Free Pr ofile”, V er- sion 0.96 or higher . See the Uconnect™ website for supported phones. For Uconnect™ customer support, visit the following websites: • www .
Uconnect™ Phone Button The radio or steering wheel controls (if equipped) will contain the two control buttons (Uconnect™ Phone button and V oice Command button) that will enable you to access the system. When you press the button you will hear the word Uconnect™ followed by a BEEP .
• For certain operations, compound commands can be used. For example, instead of saying “Setup” and then “Phone Pairing”, the following compound command can be said: “Setup Phone Pairing.” • For each feature explanation in this section, only the compound form of the voice command is given.
T o complete the pairing process, you will need to refer - ence your mobile phone Owner’s Manual. The Uconnect™ website may also provide detailed instr uc- tions for pairing. The following are general phone to Uconnect™ Phone pairing instructions: • Press the button to begin.
Dial by Saying a Number • Press the button to begin. • After the “Ready” prompt and the following beep, say “Dial”. • The system will prompt you to say the number you want to call. • For example, you can say “234-567-8901”. • The Uconnect™ Phone will confirm the phone number and then dial.
• After the “Ready” prompt and the following beep, say “Phonebook New Entry”. • When prompted, say the name of the new entry . Use of long names helps the V oice Command and it is recom- mended. For example, say “Robert Smith” or “Robert” instead of “Bob”.
• Automatic download and update, if supported, begins as soon as the Bluetooth 威 wireless phone connection is made to the Uconnect™ Phone, for example, after you start the vehicle. • A maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the Uconnect™ Phone.
NOTE: • The phone handset must support Bluetooth 威 OBEX transfers of phonebook entries to use this feature. • Some phones cannot send phonebook entries if they are alr eady connected to any system via Bluetooth 威 , and you may see a message on the phone display that the Bluetooth 威 link is busy .
After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu. “Phonebook Edit” can be used to add another phone number to a name entry that already exists in the phonebook.
Delete/Erase “All” Uconnect™ Phonebook Entries • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook Erase All”. • The Uconnect™ Phone will ask you to verify that you wish to delete all the entries from the phonebook.
Phone Call Features The following features can be accessed thr ough the Uconnect™ Phone if the feature(s) ar e available on your mobile service plan. For example, if your mobile service plan provides thr ee-way calling, this feature can be accessed through the Uconnect™ Phone.
in progr ess. T o go back to the first call, refer to “T oggling Between Calls” in this section. T o combine two calls, refer to “Conference Call” in this section. Place/Retrieve a Call From Hold T o put a call on hold, press the button until you hear a single beep.
on hold may not become active automatically . This is cell phone-dependent. T o bring the call back from hold, press and hold the button until you hear a single beep. Redial • Press the button to begin. • After the “Ready” prompt and the following beep, say “Redial”.
• After the “Ready” prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. • Continue to follow the system prompts to complete the language selection. After selecting one of the languages, all prompts and voice commands will be in that language.
• If supported, this number may be programmable on some systems. T o do this, press the button and say “Setup”, followed by “Emergency”. • The Uconnect™ Phone does slightly lower your chances of successfully making a phone call as to that for the mobile phone directly .
certain companies, which time out a little too soon to work properly with the Uconnect™ Phone. V oice Mail Calling T o learn how to access your voice mail, refer to “W orking with Automated Systems”.
NOTE: • Y ou may not hear all of the tones due to mobile phone network configurations. This is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature.
using Uconnect™ Phone. The status is given for network signal strength, phone battery str ength, etc. Dialing Using the Mobile Phone Keypad Y ou can dial a phone number with your mobile phone keypad.
from your Uconnect™ Phone pair ed mobile phone to the Uconnect™ Phone or vice versa, press the button and say “T ransfer Call”. Connect or Disconnect Link Between the Uconnect™ Phone and Mob.
• The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect™ Phone will return to using the highest priority phone present in or near (appr oximately within 30 ft (9 m)) the vehicle. Delete Uconnect™ Phone Paired Mobile Phones • Press the button to begin.
Y ou can either press the Uconnect™ Phone button to restor e the factory setting or repeat the words and phrases when prompted by the Uconnect™ Phone. For best results, the V oice T raining session should be com- pleted when the vehicle is parked with the engine running, all windows closed, and the blower fan switched off.
• fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, Fr ench, and Spanish ac- cents, the system may not always work for some.
• fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the Uconnect™ Phone. • Echo at the phone far end can sometimes be reduced by lowering the in-vehicle audio volume.
Send Messages: Y ou can send messages using Uconnect™ Phone. T o send a new message: • Press the button. • After the “Ready” prompt and the following beep, say “SMS Send” or “Send Messages.” • Y ou can either say the message you wish to send or say “List Messages.
16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me T urn SMS Incoming Announcement ON/OFF T urning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming mes- sages. • Press the button.
1 14 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 15.
1 16 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompt.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the V oice Command button, listen for the beep, and say your command. Pressing the V oice Command button while the system is speaking is known as “barging in.
Changing the V olume 1. Start a dialogue by pressing the V oice Command button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the V oice Command system is speaking. Please note the volume setting for V oice Command is different than the audio system.
• “Next Station” (to select the next station) • “Previous Station” (to select the pr evious station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Satellite Radio T o switch to satellite radio mode, say “Sat” or “Satellite Radio”.
Memo T o switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding, you may press the V oice Command button to stop recor ding.
• “Language French” • “Language Spanish” • “T utorial” • “V oice T raining” NOTE: Keep in mind that you have to press the V oice Command button first and wait for the beep before speaking the “Bar ge In” commands.
W ARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly . Power Driver Seat On some models the driver’s seat can be equipped with six-way power .
Adjusting the seat forward or rearward The seat can be adjusted both forward and r earward. Push the four-way switch seat switch forwar d or rear- ward, the seat will move in the dir ection of the switch. Release the switch when you have reached the desir ed position.
W ARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seatbelts and while the vehicle is parked.
CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’ s path.
W ARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seatbelts and while the vehicle is parked.
Manual Lumbar — If Equipped Some vehicle may be equipped with a manual lumbar support. The manual lumbar rotary contr ol adjustment is located on the left side of the driver’s seat. Rotate the knob to increase or decr ease the amount of lumbar support.
When the HIGH-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal HIGH-level. If the HIGH-level setting is selected, the system will automatically switch to LOW -level after approximately 30 minutes of continuous operation.
CAUTION! Repeated overheating of the seat could damage the heating element and/or degrade the material of the seat. Head Restraints Head restraints ar e designed to reduce the risk of injury by restricting head movement in the event of a r ear impact.
Rear Head Restraints The rear seat is equipped with nonadjustable head r e- straints. Refer to “Occupant Restraints” in “Things to Know Before Starting Y our V ehicle” for information on child seat tether routing. Extended Cab/Crew Cab Rear Seat More car go space is available by lifting up on the rear seat cushion.
2. Then push the safety latch lever up while lifting the grille with your hand. It is located at the bottom center of the grille. Lift the hood, and the gas filled props will hold it open. CAUTION! T o prevent possible damage, do not slam the hood to close it.
LIGHTS The headlight switch is located on the left side of the instrument panel next to the steering wheel. Headlights, Parking Lights And Panel Lights When the headlight switch is rotated to the first position, the parking lights, taillights, side marker lights, license plate light and instrument panel lights ar e all turned on.
Headlight Delay T o aid in your exit, your vehicle is equipped with a headlight delay that will leave the headlight on for 60 seconds. This delay is initiated when the ignition is turned OFF while the headlight switch is on, and then the headlight switch is cycled off.
Interior Lights Courtesy and dome lights are turned on when the fr ont doors are opened, when the dimmer contr ol (rotating wheel on the right side of the switch) is rotated to the second upward detent position, or if equipped, when the UNLOCK button is pressed on the Remote Keyless Entry (RKE) transmitter .
NOTE: Club Cab 威 /Quad Cab 威 models may have an optional switched dome lamp that is operated by press- ing the lens. Multifunction Lever The multifunction lever is located on the left side of the steering column.
• If a turn signal has been left on for a minimum of 1 mile (1.6 km), a continuous chime will sound. Lane Change Assist T ap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn of f.
Battery Saver T o protect the life of your vehicle’s battery , Load Shed- ding is provided for both the interior and exterior lights. If the ignition is OFF and any door is left ajar for 15 minutes or the dimmer control is r otated upwards for 15 minutes, the interior lights will automatically turn off.
WINDSHIELD WIPERS AND W ASHERS The multifunction lever is located on the left side of the steering column. Windshield Wipers The wipers and washers are operated by a switch in the multifunction lever . T urn the end of the multifunction lever to select the desired wiper speed.
Intermittent W iper System The intermittent feature of this system was designed for use when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. For maximum delay between cycles, rotate the contr ol knob into the upper end of the delay range.
T o prevent freeze-up of your windshield washer system in cold weather , select a solution or mixture that exceeds the temperature range of your climate. This rating infor - mation can be found on most washer fluid containers. W ARNING! Sudden loss of visibility through the windshield could lead to a collision.
Pull the lever toward the steering wheel to unlock the steering column. W ith one hand firmly on the steering wheel, move the steering column up or down, as desired. Push the lever away from the steering wheel to lock the column firmly in place. W ARNING! Do not adjust the steering column while driving.
NOTE: In order to ensur e proper operation, the Elec- tronic Speed Contr ol System has been designed to shut down if multiple Speed Control functions ar e operated at the same time.
T o Deactivate A soft tap on the brake pedal, normal braking, or pressing the CANCEL button will deactivate the speed contr ol without erasing the memory . Pushing the ON/OFF but- ton to the OFF position or turning off the ignition erases the memory .
T o Accelerate for Passing Press the accelerator as you would normally . When the pedal is released, the vehicle will r eturn to the set speed. NOTE: When driving uphill, at elevations above 2,000 ft (610 m), or when the vehicle is heavily loaded (especially when towing) the vehicle may slow below the SET speed.
OVERHEAD CONSOLE The overhead console has the following featur es: • Courtesy Lights • Garage Door Opener — If Equipped • Compass/T emperature Mini-T rip Computer — If Equipped Courtesy/Reading Lights Near the front of the console ar e two courtesy/reading lights.
COMP ASS/TEMPERA TURE MINI-TRIP COMPUTER This feature allows you to choose between a compass/ temperature display and one of four trip conditions being monitored. US/M Button Use the US/M button to change the display from U.S. to metric measurement units.
RESET Button Use the RESET button to reset the following displays: • A verage Fuel Economy • T rip Odometer • Elapsed time. STEP Button Use the STEP button to choose, or cycle thr ough, the four trip conditions.
A verage Fuel Economy (A VG ECO) Displays the average fuel economy since the last reset. A verage fuel economy is a running average of the amount of fuel used and the distance the vehicle has traveled.
Resetting of this screen will cause the trip odometer to change to zero. Then the trip odometer must be r eset in order to update the trip odometer miles. Elapsed Time (ET) This display shows the accumulated ignition ON time since the last reset. Resetting the Elapsed T ime will cause the display to change to zero.
Global Reset If the RESET button is pressed twice within two seconds while in any of the three r esettable displays (A VG ECO, ODO, ET), the GLOBAL RESET will reset all three displays.
If the compass appears erratic and the CAL symbol does not appear , you must manually put the compass into the “Calibration” mode. T o Put Into a Calibration Mode T urn the ignition ON and set the display to “Compass/ T emperature.
Outside T emperature Because the ambient temperature sensor is located under the hood, engine temperature can influence the displayed temperature; ther efore, temperature r eadings are slowly updated when the vehicle speed is below 20 mph (30 km/h) or during stop-and-go driving.
W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards.
Y our vehicle should be parked outside of the garage while training. • T urn the ignition switch to the ON/RUN position. • Place the handheld transmitter 1 to 3 inches (3 to 8 cm) from the HomeLink 威 buttons while keeping the HomeLink 威 display in view .
This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 1. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer .
Gate Operator/Canadian Programming Canadian radio-frequency laws r equire transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink 威 to pick up the signal during programming.
Reprogramming A Single HomeLink 姞 Button T o reprogram a channel that has been pr eviously trained, follow these steps: 1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desired HomeLink 威 button for 20 seconds until the indicator(s) starts to flash.
General Information This device complies with FCC rules part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interfer ence that may cause undesired operation.
When the optional Cigar Lighter heating element is used, it heats when pushed in and pops out automatically when ready for use. T o preserve the heating element, do not hold the lighter in the heating position. NOTE: • T o ensure proper operation a MOP AR 威 knob and element must be used.
CAUTION! (Continued) • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will discharge the battery even more quickly .
A two-cavity cupholder is available on all Crew Cabs, with rear seats mounted on the floor . REAR CRA TE ’N GO 姞 STORAGE — IF EQUIPPED The rear Crate ’n Go 威 storage, located under the r ear seat lower cushion, consists of two removable, collapsible storage crates.
T o remove the crate, press on the r elease lever , located on the ends of the base, and lift up on the crate. T o install the crate into the base, insert the crate into the inboard slot and push down on the outboar d side of the crate, then snap into place.
Plastic Grocery Bag Retainers Retainer hooks, which will hold plastic grocery bag handles, are built into the back panel of the cab. CONSOLE FEA TURES — IF EQUIPPED Floor Console Features The Floor Console between the driver’s and front pas- senger’s seat has the following features: • Miscellaneous storage compartments.
Storage Compartments Some miscellaneous storage compartments and cuphold- ers are both r emovable and dishwasher safe (upper rack of dishwasher only) for cleaning purposes. V arious stor- age compartments provide versatile and useful storage. A coin holder is also provided inside the driver side storage bin.
inside of the armrest lid. A tissue holder is also provided on the inside of the armrest lid, which holds a pocket-size soft pack of tissue. CARGO AREA FEA TURES Rear Cargo Area Utility Rails — If E.
T o remove the cleats from the utility rail, r emove the end cap by pushing up on the locking tab, located on the bottom of the end cap. Slide the cleat off the end of the rail.
CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
SLIDE-IN CAMPERS Camper Applications Certain truck models ar e not recommended for slide-in campers. T o determine if your vehicle is excluded, please refer to the Consumer Information T ruck-Camper Load- ing document, located in your Owner’s Manual packet or available from your authorized dealer .
3. Lift the tailgate off of the pivot on the passenger side by pulling upward and r earward at the same time. 4. Slide the tailgate to the passenger side while making sure clearance fr om the box and taillight is maintained. T o reinstall the tailgate, do the following: 1.
2. Secure the tailgate in the partially-open position: 3. Open the tailgate slightly . 4. Snap the tailgate support cable between the cable guide and the tailgate bumper .
T o return the tailgate to the full-open position: 1. Lift up on the tailgate. 2. Remove both cables from between the cable guides and the tailgate bumpers, and lower the tailgate. CAUTION! • Care should always be exercised when operating a vehicle with cargo.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 7 7 䡵 Instrument Cluster .................... 1 7 8 䡵 Instrument Cluster Descriptions ........... 1 7 9 䡵 Media Center 230 (REQ) — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) .
▫ Notes On Playing MP3 Files ............ 2 1 8 ▫ Operation Instructions - Auxiliary Mode .... 2 2 0 䡵 Media Center 130 W ith Satellite Radio (Sales Code RES+RSC) ....................... 2 2 1 ▫ Operating Instructions — Radio Mode ..... 2 2 1 ▫ Operation Instructions — CD Mode For CD And MP3 Audio Play .
INSTRUMENT P ANEL FEA TURES 1 — Headlight Switch 6 — Glove Compartment 1 1 — T ransfer Case Switch* 2 — Air Outlets 7 — Radio 12 — Speed Control Switches 3 — Demister Outlets 8 — Clima.
INSTRUMENT CLUSTER 178 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The fuel gauge shows the level of fuel in the fuel tank when ignition switch is in the ON/RUN position. 2. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily .
5. High Beam Indicator The high beam indicator will illuminate if the headlights are on high beam. 6. Seat Belt Reminder Light When the ignition switch is first turned to ON/ RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see “Maintaining Y our V ehicle”.
If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir ed. However , the conventional brake system will continue to operate normally if the BRAKE warning light is not on.
V ehicle Odometer Messages When the appropriate conditions exist, the following messages will display in the odometer: door ............................. Door Ajar gASCAP ....................... Fuel Cap Fault LoW tirE ..................... L o w T i r e P r essure noFUSE .
damaged, a “noFUSE” message will display in the odom- eter display area. For further information on fuses and fuse locations refer to “Fuses” in “Maintaining Y our V ehicle”. CHAngE OIL Message Y our vehicle is equipped with an engine oil change indicator system.
U.S. Federal regulations r equire that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repair ed or serviced, the repair technician should leave the odometer reading the same as it was before the r epair or service.
W ARNING! Continued operation with the T ransmission T em- perature W arning Light illuminated could cause the fluid to boil over , come in contact with hot engine or exhaust components causing a fire that may result in personal injury .
condition has been corrected. If the pr oblem is related to the brake booster , the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual brake system provides a r eserve braking capac- ity in the event of a failure to a portion of the hydraulic system.
The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN posi- tion. NOTE: This light shows only that the parking brake is applied.
W ARNING! A malfunctioning catalytic converter , as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants or wood or cardboard, etc.
maintain correct tir e pressure, even if under -inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly .
23. Airbag W arning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, then have the system inspected at an authorized dealer as soon as possible.
29. 4WD LOW Indicator This light alerts the driver that the vehicle is in the four-wheel drive LOW mode. The fr ont and rear driveshafts ar e mechanically locked to- gether forcing the fr ont and rear wheels to rotate at the same speed. Low range pr ovides a greater gear reduction ratio to pr ovide increased torque at the wheels.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping.
Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone featur e (if equipped). Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in AM, FM or Satellite (if equipped) frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the frequency .
or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information.
Program T ype 16-Digit Character Display T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode.
• Audio Stream – Repeatedly pr essing SELECT will switch to differ ent audio languages (if supported on the disc) (if equipped). • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). NOTE: • The available selections for each of the above entries varies depending upon the disc.
Enter the four-digit country code using the TUNE/ SCROLL contr ol knob to scroll up and down to select the number and then push to select. Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are ef fective only if the disc supports the customer-pr eferred settings.
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc.
Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc.
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file recor ding media and formats are limited. When writing MP3/WMA files, pay attention to the following restrictions.
If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.
Playlist files are not supported. MP3 Pr o files are not supported. Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
Press the INFO button once mor e to return to ⬙ elapsed time ⬙ priority mode. Press and hold the INFO button for thr ee seconds or more and radio will display song titles for each file. Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display .
R W/FF (Auxiliary Mode) No function. SET Button (Auxiliary Mode) No function. Operating Instructions — V oice Command System (If Equipped) For the radio, Refer to “V oice Command” in the Uconnect™ User Manual located on the DVD for further details.
DTS™ ⬙ DTS™ ⬙ and ⬙ DTS™ 2.0 ⬙ are trademarks of Digital The- ater Systems, Inc. Uconnect™ Multimedia (Satellite Radio) — If Equipped Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast.
using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display . The Sirius ID number display will time out in two minutes.
SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it.
T oggle the MUSIC TYPE button again to select the music type. By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name.
Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). MEDIA CENTER 130 (SALES CODE RES) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection, without stopping.
R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the frequency .
SET/RND Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and r elease that button.
• This radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), rewritable compact discs (CD-R W), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up.
If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped).
Notes on Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3.
Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
MEDIA CENTER 130 WITH SA TELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio.
SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink.
Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decr ease the bass tones. Push the rotary TUNE/SCROLL contr ol knob a second time and MID will display .
T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls.
By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory .
If you insert a disc with the ignition ON/RUN and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or RW or another CD button is pressed.
The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders.
rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specifi- cation Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when the ignition is OFF). Uconnect™ Multimedia (Satellite Radio) — If Equipped Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast.
using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display . The Sirius ID number display will time out in two minutes.
SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it.
T oggle the MUSIC TYPE button again to select the music type. By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name.
Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations).
The button located in the center of the right hand control will switch modes to Radio or CD. The left hand control is a r ocker type switch with a push button in the center . The function of the left hand control is differ ent depending on which mode you are in.
3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzene, thinner , cleaners, or anti-static sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatur es may become too high.
Air Conditioning and Heater Air Conditioning and Heater Operation T o turn on the air conditioning, set the fan control at any speed and press the SNOWFLAKE button located at the right of the control panel. Conditioned air will be di- rected thr ough the outlets selected by the mode control.
Recirculation Modes (Panel or Bi-Level ) Select the recir culation modes when the outside air contains dust, odors, high humidity , or if rapid cooling is desired.
• For information on operating the rear defr ost, refer to “Rear W indow Features” in “Understanding The Fea- tures Of Y our V ehicle”. Blower Control The rotary knob on the left of the control panel is the Blower Contr ol. T urn the knob clockwise to one of the four positions to obtain the blower speed you desire.
edges of the instrument panel. The demisters also pr o- vide extra air ducts for circulation. They ar e in operation whenever the Floor , Mix, Defrost, or Bi-Level modes ar e in use. NOTE: When you turn off the engine you may hear a hissing sound from under the hood for a short period of time.
speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the defrost mode. Regular cleaning of the inside of the windows with a non-filming cleaning solution (vinegar and water works very well) will help prevent contaminates (cigar ette smoke, perfumes, etc.
Operation Tips Chart 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 245.
.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 5 1 ▫ Automatic T ransmission ............... 2 5 1 ▫ Normal Starting ..................... 2 5 1 ▫ Extreme Cold W eather (Below –20°F Or –29°C) ............
䡵 Limited-Slip Rear Axle Differ ential — If Equipped ............................ 2 6 6 䡵 Driving On Slippery Surfaces ............. 2 6 7 ▫ Acceleration ........................ 2 6 7 ▫ T raction ........................... 2 6 8 䡵 Driving Through W ater .
▫ T read W ear Indicators ................. 2 9 1 ▫ Life Of T ire ........................ 2 9 2 ▫ Replacement T ires .................... 2 9 2 䡵 T ire Chains .......................... 2 9 4 䡵 Snow T ires .......................... 2 9 5 䡵 T ire Rotation Recommendations .
▫ Maintenance ........................ 3 1 0 䡵 Adding Fuel ......................... 3 1 1 ▫ Fuel Filler Cap (Gas Cap) .............. 3 1 1 ▫ Loose Fuel Filler Cap Message ........... 3 1 2 䡵 V ehicle Loading ...................... 3 1 3 ▫ Certification Label .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.
T urn the ignition switch to the ST ART position and release when the engine starts. If the engine fails to start within 10 seconds, turn the key to the OFF position, wait 5 seconds, then repeat the “Normal Starting” pr ocedure.
CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key is released.
W ARNING! Remember to disconnect the engine block heater cord before driving. Damage to the 1 10-115 V olt electrical cord could cause electrocution. AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop.
Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Inter- lock which requir es the shift lever to be placed in P ARK prior to rotating the key to the LOCK position. The key can only be removed fr om the ignition when the ignition is in the LOCK position and once removed the shift lever is locked in P ARK.
W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed.
REVERSE This range is for moving the vehicle backward. Use only after the vehicle has come to a complete stop. NEUTRAL This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle.
• the TOW/HAUL switch has not been activated; • transmission has reached normal operating temperature. NOTE: • If the vehicle is started in extremely cold temperatur es, the transmission may not shift into Overdrive and will automatically select the most desirable gear for opera- tion at this temperature.
economy), and automatic closed-throttle downshifts to third gear (for impr oved braking) will occur during steady braking. The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate when the switch has been activated. Pressing the switch a second time r estores normal operation.
NOTE: • The torque converter clutch will not engage until the transmission fluid and engine coolant are warm (usu- ally after 1-3 miles [1.6 - 4.8 km] of driving). Because the engine speed is higher when the torque converter clutch is not engaged, it may seem as if the transmis- sion is not shifting into Overdrive when cold.
The NV233/243 transfer case provides four mode posi- tions: • T wo-wheel drive high range (2WD) • Four-wheel drive lock range (4WD LOCK) • Four-wheel drive low range (4WD LOW) • Neutral (N) Th.
If one or more shift requirements are not met: 1. An indicator light will flash. 2. The transfer case will not shift. NOTE: Before r etrying a selection, make certain that all the necessary requir ements for selecting a new transfer case position have been met.
When operating your vehicle in 4WD LOW , the engine speed is approximately thr ee times that of the 2WD or 4WD LOCK positions at a given road speed. T ake care not to overspeed the engine and do not exceed 25 mph (40 km/h). Proper operation of four -wheel drive vehicles depends on tires of equal size, type and cir cumference on each wheel.
2WD Rear-Wheel Drive High — This range is used for normal street and highway driving on dry , hard-surfaced r oads. 4WD LOCK Four-Wheel Drive Lock — This range locks the fr ont and rear driveshafts together for cing the front and rear wheels to rotate at the same speed.
2WD-to-4WD LOCK or 4WD LOCK-to-2WD T urn the transfer case switch to the desired position. Shifts between 2WD and 4WD LOCK can be done with the vehicle stopped, or in motion. W ith the vehicle in motion, the transfer case will engage/disengage faster if you momentarily release the accelerator pedal after turn- ing the transfer case switch.
Alternate Procedure 1. Bring the vehicle to complete stop. 2. W ith the key ON and the engine either OFF or running, shift the transmission into NEUTRAL. 3. T urn the transfer case switch to the desired position. 4. After the desired position indicator light is ON (not flashing), shift the transmission back into gear .
W ARNING! On vehicles equipped with a limited-slip differen- tial, never run the engine with one rear wheel off the ground. The vehicle may drive through the rear wheel remaining on the ground and cause you to lose control of the vehicle. Care should be taken to avoid sudden accelerations when both rear wheels ar e on a slippery surface.
T raction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and r oad surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precau- tions should be observed: 1.
Shallow Standing W ater Although your vehicle is capable of driving through shallow standing water , consider the following Caution and W arning before doing so.
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances.
After Driving Off-Road Off-r oad operation puts more stress on your vehicle than does most on-road driving. After going of f-road, it is always a good idea to check for damage. That way you can get any problems taken car e of right away and have your vehicle ready when you need it.
• If you experience unusual vibration after driving in mud, slush or similar conditions, check the wheels for impacted material. Impacted material can cause a wheel imbalance and freeing the wheels of it will correct the situation.
CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur . Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed.
If necessary , add fluid to restore to the pr oper indicated level. W ith a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information.
When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. Apply the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK.
CAUTION! If the “Brake W arning Light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately .
W ARNING! Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer . Just press firmly on your brake pedal when you need to slow down or stop.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. design standards and it begins with the tir e diameter molded into the sidewall.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) running from the sill to the r oof.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tel.
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loadi.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]).
286 ST ARTING AND OPERA TING.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread.
Inflation pressur es specified on the placard are always “cold tire inflation pr essure.” Cold tire inflation pr essure is defined as the tire pr essure after the vehicle has not been driven for at least three hours or driven less than 1 mile (1.6 km) after a three hour period.
W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious collision. Do not drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
Life of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
TIRE CHAINS CAUTION! • The use of chains is permitted only on vehicles equipped with P245/70R16 tires. • Use only “Class S” chains or other traction aids that meet SAE T ype “S” specifications. • T ire chain use is permitted only on the rear tires.
CAUTION! (Continued) • Drive cautiously and avoid severe turns and large bumps, especially with a loaded vehicle. • Do not install tire chains on front wheels of vehicles.
If you need snow tires, select tir es equivalent in size and type to the original equipment tires. Use snow tir es only in sets of four; failure to do so may adversely af fect the safety and handling of your vehicle.
The suggested rotation method is the “forwar d cross” shown in the following diagram. This rotation pattern does not apply to some directional tir es that must not be reversed.
TPMS will warn the driver of a low tire pr essure if the tire pressur e falls below the low pressure warning thr eshold for any reason, including low temperatur e effects, or natural pressur e loss through the tire.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style.
• Seasonal temperature changes will af fect tire pressur e, and the TPMS will monitor the actual tire pr essure in the tire. Base System The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels.
the fault condition no longer exists. A system fault can occur by any of the following scenarios: 1) Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies.
General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed operation.
Over 40 auto manufacturers worldwide, have issued and endorsed consistent gasoline specifications (the W orld- wide Fuel Charter , WWFC), which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle.
E-85 Usage In Non-Flex Fuel V ehicles Non-FFV vehicles are compatible with gasoline contain- ing 10% ethanol (E10). Gasoline with higher ethanol content may void the vehicle’s warranty .
be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and California reformulated gasoline. Materials Added T o Fuel All gasolines sold in the United States are r equired to contain effective deter gent additives.
CAUTION! (Continued) • The use of fuel additives which are now being sold as octane enhancers is not recommended. Many of these products contain high concentra- tions of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer .
W ARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly . Until repaired, drive with all side windows fully open.
Ethanol Fuel (E85) E85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
When you do switch fuel types it is recommended that: • you do not switch when the fuel gauge indicates less than 1/4 full • you do not add less than 5 gallons (19 Liters) when refueling • you o.
Starting The characteristics of E85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). In the range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up.
ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door . When fueling, the cap may be placed on the inside of the filler door . If the gas cap is lost or damaged, be sure the r eplacement cap is for use with this vehicle.
W ARNING! (Continued) • Never add fuel to the vehicle when the engine is running. This is in violation of most state and federal regulations and may cause the “Malfunc- tion Indicator Light (MIL)” to turn on. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle or on a truck bed.
VEHICLE LOADING Certification Label As requir ed by National Highway T raffic Safety Admin- istration Regulations, your vehicle has a certification label affixed to the driver’s side door .
Gross Axle W eight Rating (GA WR) The GA WR is the maximum permissible load on the front and rear axles. The load must be distributed in the car go area so that the GA WR of each axle is not exceeded. Each axle GA WR is determined by the component in the system with the lowest load carrying capacity (axle, springs, tires, or wheels).
should then be determined separately to be sure that the load is properly distributed over fr ont and rear axle. W eighing the vehicle may show that the GA WR of either the front or r ear axles has been exceeded but the total load is within the specified GVWR.
Common T owing Definitions The following trailer towing related definitions will assist you in understanding the following information: Gross V ehicle W eight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, cargo and tongue weight.
W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have a collision. T railer T ongue W eight (TW) The tongue weight is the downward for ce exerted on the hitch ball by the trailer is the tongue weight.
equalizing) hitch are r ecommended for heavier tongue weights and may be requir ed depending on vehicle and trailer configuration/loading to comply with Gross Axle W eight Rating (GA WR) requirements.
EXAMPLE — W ith W eight-Distributing Hitch (Correct) EXAMPLE — Improper Adjustment of W eight- Distributing Hitch (Incorrect) 5 ST ARTING AND OPERA TING 319.
T railer Hitch Classification The rear bumper is intended to tow trailers up to 2,000 lbs (907 kg) without added equipment or alter- ations to the standard equipment. Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package.
T railer T owing Weights (Maximum T railer Weight Ratings) NOTE: For additional trailer towing information in- cluding maximum trailer and tongue weight rating for your vehicle, refer to the following website addr esses: • http:// www .dodge.com/bodybuilder • http:// www .
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle.
W ARNING! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
W ARNING! (Continued) 2. GTW 3. GA WR 4. T ongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight.) T owing Requirements – T ires − Do not attempt to tow a trailer while using a compact spare tir e.
− An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electr onic brake controller is not r equired.
The T railer T ow Package may include a four and seven- pin wiring harness. Use a factory approved trailer har - ness and connector . NOTE: Do not cut or splice wiring into the vehicle’s wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector .
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. Automatic T ransmission The “DRIVE” range can be selected when towing. How- ever , if frequent shifting occurs while in this range, the TOW/HAUL feature should be selected.
NOTE: Check the automatic transmission fluid level before towing. T ow/Haul – If Equipped T o reduce potential for automatic transmission overheat- ing, turn the TOW/HAUL feature ON when driving in hilly areas or shift the transmission to Drive position 2 on more sever e grades.
W ARNING! Do not add a snow plow , winches, or any other aftermarket equipment to the front of your vehicle. This could adversely affect the functioning of the airbag system in a collision and you could be injured. RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.
Recreational T owing Procedure W ARNING! Y ou or others could be injured if you leave the vehicle unattended with the transfer case in the NEUTRAL position without first fully engaging the parking brake.
7. After the shift is completed and the NEUTRAL light comes on, release the NEUTRAL button. 8. Start the engine. 9. Shift the transmission into REVERSE. 10. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 1 1. Repeat Steps 9 and 10 with the transmission in DRIVE.
longer met during the four second timer , then the NEUTRAL indicator light will flash continuously until all requir ements are met or until the NEUTRAL button is released. • The ignition key must be ON for a shift to take place and for the position indicator lights to be operable.
8. After the NEUTRAL indicator light turns of f, release the NEUTRAL button. 9. After the NEUTRAL button has been released, the transfer case will shift into the position identified by the transfer case switch. 10. Start the engine. Shift the transmission into DRIVE to verify that the transfer case has engaged.
.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 3 6 䡵 Jacking And T ire Changing ............... 3 3 7 ▫ Jack Location ....................... 3 3 7 ▫ Removing The Spare T ire ............... 3 3 9 ▫ T ire Changing Procedur e .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the top of the steering column, just behind the steering wheel. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency .
JACKING AND TIRE CHANGING Jack Location In this vehicle, the scissor jack and tire changing tools for Extended Cab models are stowed in a compartment under the rear passenger seat. Cr ew Cab model scissor jack and tire changing tools ar e accessed by lifting up the rear passenger seat.
Jack Screw Jack Stowage Location (Crew Cab) 338 WHA T TO DO IN EMERGENCIES.
W ARNING! The jack is designed as a tool for changing tires only . The jack should not be used to lift the vehicle for service purposes, unless suitable supports are placed under the vehicle as a safety measure. The vehicle should be jacked on a firm level surface only .
• Rotate clockwise to stow the spare tir e. Inserting Lug W rench and Extension T urning Lug W rench and Extension 340 WHA T TO DO IN EMERGENCIES.
It is recommended that you stow the flat or spar e to avoid tangling the loose cable. NOTE: The winch mechanism is designed for use with the jack extension tube only . Use of an air wrench or other power tools is not recommended and can damage the winch.
W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. T urn on the Hazard W arning flasher . 3. Set the parking brake.
Instructions W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • T urn on the Hazard W arning flasher .
1. Lower and remove the spare wheel, jack, and tools from stowage. 2. Using the wheel wrench, loosen, but do not remove, the wheel nuts by turning them counterclockwise one turn while the wheel is still on the ground. 3. When changing a front wheel, place the jack under the frame rail behind the wheel.
4. When changing a rear wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle in the positions shown with the drive tubes extending to the rear . Connect the jack tube extension and wheel wrench.
W ARNING! Raising the vehicle higher than necessary can make the vehicle unstable and cause a collision. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the wheel nuts and pull the wheel off.
W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised.
NOTE: T o Stow the Flat or Spare: Wheel retainer does not fit through the center of the aluminum wheel. The tir e must be stored in a safe manner in the bed of the tr uck.
Preparations for Jump-Start The battery in your vehicle is located in the front of the engine compartment, behind the left headlight assembly . W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on.
3. If using another vehicle to jump-start the battery , park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF . W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result.
W ARNING! Do not connect the cable to the negative post (-) of the discharged battery . The resulting electrical spark could cause the battery to explode and could result in personal injury .
FREEING A STUCK VEHICLE If vehicle becomes stuck in snow , sand, or mud, it can often be moved by a rocking motion. Move the shift lever rhythmically between FIRST and REVERSE, while apply- ing slight pressur e to the accelerator . CAUTION! Racing the engine or spinning the wheels may lead to transmission overheating and failure.
CAUTION! Revving the engine or spinning the wheels too fast may lead to transaxle overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h). Do not spin the wheels continu- ously for more than 30 seconds. EMERGENCY T OW HOOKS — IF EQUIPPED Y our vehicle may be equipped with emergency tow hooks.
W ARNING! • Chains are not recommended for freeing a stuck vehicle. Chains may break, causing serious injury or death. • Stand clear of vehicles when pulling with tow hooks. T ow straps and chains may break, causing serious injury . CAUTION! T ow hooks are for emergency use only , to rescue a vehicle stranded off road.
T wo-Wheel Drive V ehicles Provided that the transmission is operable, tow with the transmission in NEUTRAL and the ignition key in the OFF position, along with the front wheels raised and the rear wheels on the gr ound. The speed must not exceed 30 mph (50 km/h), and the distance must not exceed 15 miles (25 km).
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.7L ............. 3 5 9 䡵 Engine Compartment — 4.7L ............. 3 6 0 䡵 Onboard Diagnostic System — OBD II ...... 3 6 1 ▫ Loose Fuel Filler Cap Message ........... 3 6 1 䡵 Emissions Inspection And Maintenance Programs .
▫ Cooling System ..................... 3 7 5 ▫ Brake System ....................... 3 8 0 ▫ Automatic T ransmission ............... 3 8 2 ▫ T ransfer Case ....................... 3 8 5 ▫ Front/Rear Axle Fluid ................. 3 8 6 ▫ Appearance Care And Protection From Corrosion .
ENGINE COMP ARTMENT — 3.7L 1 — Air Cleaner Filter 7 — Power Steering Fluid Reservoir 2 — Automatic T ransmission Dipstick 8 — Engine Oil Fill 3 — Engine Oil Dipstick 9 — Coolant Pressur .
ENGINE COMP ARTMENT — 4.7L 1 — Air Cleaner Filter 7 — Engine Oil Fill 2 — Automatic T ransmission Dipstick 8 — Power Steering Fluid Reservoir 3 — Engine Oil Dipstick 9 — Coolant Pressur .
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the prob- lem is detected twice in a row , the system will turn on the MIL.
4. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
your vehicle. Refer to these Service Manuals before attempting any procedur e yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle.
CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning.
NOTE: Under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichever occurs first. Engine Oil Selection For best performance and maximum protection under al.
Synthetic Engine Oils Y ou may use synthetic engine oils, provided the recom- mended oil quality requir ements are met, and the recom- mended maintenance intervals for oil and filter changes are followed.
W ARNING! The air induction system (air cleaner , hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.) unless such removal is necessary for repair or maintenance.
W ARNING! (Continued) • Battery gas is flammable and explosive. Keep flame or sparks away from the battery . Do not use a booster battery or any other booster source with an output greater than 12 V olts. Do not allow cable clamps to touch each other .
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery and Recycling R-134a air conditioning refrigerant is a hydr ofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency (EP A), and is an ozone-saving prod- uct.
A void using the wiper blades to remove frost or ice fr om the windshield. Keep the blade rubber out of contact with petroleum pr oducts such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depend- ing on geographical area and fr equency of use.
have an authorized technician inspect the complete ex- haust system and adjacent body areas for br oken, dam- aged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment.
CAUTION! (Continued) • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly .
• Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very r ough idle or malfunctioning operating conditions. Cooling System W ARNING! Y ou or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator .
Cooling System – Drain, Flush, and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals.
CAUTION! (Continued) • This vehicle has not been designed for use with Propylene Glycol-based engine coolant (anti- freeze). Use of Propylene Glycol-based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifr eeze) and will requir e more frequent coolant changes.
Disposal of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance, r equiring proper disposal. Check with your local authorities to determine the disposal rules for your community .
If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check the coolant freeze point in the radiator and in the coolant recovery bottle.
the brake master cylinder . Be sure to clean the top of the master cylinder area befor e removing the cap. W ith disc brakes, the fluid level can be expected to fall as the brake pads wear . Brake fluid level should be checked when pads are r eplaced.
W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point.
Special Additives Automatic T ransmission Fluid (A TF) is an engineered product and its performance may be impair ed by supple- mental additives. Therefor e, do not add any fluid addi- tives to the transmission. The only exception to this policy is the use of special dyes to aid in detecting fluid leaks.
6. Remove the dipstick again and note the fluid level on both sides. The fluid level should be between the “HOT” (upper) refer ence holes on the dipstick at normal operat- ing temperature. V erify that solid coating of oil is seen on both sides of the dipstick.
CAUTION! • Do not use chemical flushes in your transmission as the chemicals can damage your transmission components. Such damage is not covered by the New V ehicle Limited W arranty .
Front/Rear Axle Fluid For normal service, periodic fluid level checks are not requir ed. When the vehicle is serviced for other reasons the exterior surfaces of the axle assembly should be inspected. If gear oil leakage is suspected inspect the fluid level.
passable in snow and ice, and those that are sprayed on trees and r oad surfaces during other seasons, are highly corrosive to the metal in your vehicle.
• A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces.
Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels, should be cleaned r egularly with a mild soap and water to prevent corr osion. T o remove heavy soil, use MOP AR 威 Wheel Cleaner or equivalent, or select a nonabrasive, non-acidic cleaner .
if absolutely necessary . Do not use harsh cleaners or Armor All 威 . Use MOP AR 威 T otal Clean or equivalent to clean vinyl upholstery . Use MOP AR 威 V inyl Cleaner or equivalent to clean vinyl upholstery and trim. Leather Seat Care and Cleaning MOP AR 威 T otal Clean or equivalent is specifically recom- mended for leather upholstery .
When cleaning the rearview mirr or , spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirr or . Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instr uments in this vehicle are molded in clear plastic.
Underhood Fuses (Power Distribution Center) Y our vehicle is equipped with an electrical power distri- bution center located on the left side of the engine compartment.
Cavity Cartridge Fuse Mini- Fuse Description 7 10 Amp Red Powertrain Control Module/Fuel/ RAD/AC Coils 8 10 Amp Red Instrument Cluster/ Mirror/4x4 9 Spare 10 2 Amp Gray Run/Start Ignition Switch 1 1 1.
Cavity Cartridge Fuse Mini- Fuse Description 22 20 Amp Y ellow Power Outlet (Switch- able) 23 20 Amp Y ellow Fog Lamps 24 20 Amp Y ellow Powertrain Control Module B+ 25 15 Amp Blue Instrument Cluster .
Cavity Cartridge Fuse Mini- Fuse Description 39 30 Amp Pink Starter Solenoid 40 40 Amp Green Ignition Run Feeds 41 30 Amp Pink W iper Motor 42 25 Amp Natural Body Control Module 5 (T -Case) 43 10 Amp .
Cavity Cartridge Fuse Mini- Fuse Description 57 20 Amp Y ellow Airbag System # 2 58 20 Amp Y ellow Heated Seats 59 10 Amp Red Climate Control Sys- tem Module 60 10 Amp Red Antilock Brakes Mod- ule 61 .
LIGHT BULBS – Exterior Bulb No. Headlamp ............................. H 1 3 Front Park/T urn/Side Marker ............ 3157NA Back-Up .............................. 3157 Center High Mounted Stop Lamp ............. 9 2 1 Fog Lamp ....................
5. T wist 1/4-turn and remove headlamp bulb fr om hous- ing and replace. NOTE: The headlamp bulb is a halogen bulb. T ake care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life.
Rear Side Marker , T aillamps/Stop Lamps, And T urn Signal Bulbs 1. Remove the two screws that pass thr ough the bed sheet metal. 2. Pull the taillamp housing straight out from the body .
3. Rotate the bulb socket counterclockwise to remove it from the housing. 4. Pull bulb straight out of socket. 400 MAINT AINING YOUR VEHICLE.
5. Reverse this procedure to install bulb and housing. Place the two raised blocks past the body . Center High-Mounted Stop Lamp And Cargo Lamp 1. Remove the two screws holding the housing/lens to the body , as shown.
2. Remove housing fr om the cab. 3. Remove connector from housing tab for more clear - ance. 402 MAINT AINING YOUR VEHICLE.
4. T urn desired bulb socket 1/4-turn and r emove socket and bulb from housing. 5. Pull desired bulb straight from the socket. • Outside Bulbs: Cargo Lamps • Inside Bulb: Center High Mounted Stop Lamp 6. Reverse this procedure for installation of bulbs and housing.
License Lamps 1. Using a screwdriver , pry black rubber housing fr om the bumper . 2. Rotate the socket 1/4-turn counterclockwise. 404 MAINT AINING YOUR VEHICLE.
3. Pull bulb from socket. 4. Reverse this procedure for installation. Fog Lamps 1. Disconnect connector from the fog lamp by raising the wire harness lock tab and pulling on wir e harness connector . 2. Rotate the bulb 1/4-turn counterclockwise and pull to remove fr om the fog lamp housing.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 22 Gallons 83 Liters Engine Oil with Filter 3.7L Engine (SAE 5W -20, API Certified) 5 Quarts 4.7 Liters 4.7L Engine (SAE 5W -20, API Certified) 6 Quarts 5.7 Liters Cooling System (Includes 2.1 Quarts/2 Liters for Coolant Bottle) 3.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. T ransfer Case MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 1 0 䡵 Maintenance Schedule .................. 4 1 0 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system.
• Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, which- ever comes first. Y our authorized dealer will reset the oil change indicator message after completing the scheduled oil change.
• Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 8,000 miles (13 000 km).
24,000 Miles (39,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 24,000 miles (39 000 km). ❏ Inspect the CV joints.
40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 40,000 miles (65 000 km).
56,000 Miles (91,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 56,000 miles (91 000 km).
72,000 Miles (1 17,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 72,000 miles (1 17 000 km). ❏ Inspect the CV joints.
88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 88,000 miles (143 000 km).
96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 96,000 miles (156 000 km). ❏ Replace the engine air cleaner filter .
104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 104,000 miles (169 000 km). ❏ Flush and replace the engine coolant if not done at 60 months.
120,000 Miles (195,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 120,000 miles (195 000 km). ❏ Inspect the CV joints.
128,000 Miles (208,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 128,000 miles (208 000 km). ❏ Replace the engine air cleaner filter .
144,000 Miles (234,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 144,000 miles (234 000 km). ❏ If using your vehicle for any of the following: Dusty or off-road conditions.
† This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 2 7 ▫ Prepar e For The Appointment ........... 4 2 7 ▫ Prepar e A List ...................... 4 2 7 ▫ Be Reasonable W ith Requests .
䡵 Publication Order Forms ................ 4 3 1 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 3 3 ▫ T readwear ......................... 4 3 3 ▫ T raction Grades ..................... 4 3 3 ▫ T emperature Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or related concerns.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and remedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
LLC vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
Adding Engine Coolant (Antifreeze) .......... 3 7 7 Adding Fuel ........................... 3 1 1 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 367 Air Conditioner Maintenance ............... 3 7 0 Air Conditioning ........................ 2 4 0 Air Conditioning, Operating T ips .
Gear Ranges ......................... 2 5 5 Special Additives ...................... 3 8 3 T orque Converter ...................... 2 5 9 Axle Fluid ............................. 4 0 8 Axle Lubrication (Axle Fluid) ............... 3 8 6 Battery ......
Changing A Flat T ire ..................... 3 3 7 Chart, T ire Sizing ........................ 2 7 9 Check Engine Light (Malfunction Indicator Light) ............... 3 6 2 Checking Y our V ehicle For Safety ............. 7 6 Checks, Safety ...........
Customer Assistance ..................... 4 2 7 Data Recorder , Event ...................... 6 1 Daytime Running Lights ................... 1 3 6 Dealer Service .......................... 3 6 3 Defroster , Rear W indow ................... 1 6 9 Defroster , W indshield .
Coolant (Antifreeze) .................... 4 0 7 Exhaust Gas Caution .................. 76,306 Flooded, Starting ...................... 2 5 2 Fuel Requirements ..................... 4 0 6 Jump Starting ......................... 3 4 8 O i l ............
Fluid, Brake ........................... 4 0 8 Fluid Capacities ......................... 4 0 6 Fluid Leaks ............................. 8 0 Fluid Level Checks Automatic T ransmission ................. 3 8 3 Brake .............................. 3 8 0 Engine Oil .
T achometer .......................... 1 8 2 Gear Ranges ........................... 2 5 5 General Information ................... 1 19,302 Glass Cleaning .......................... 3 9 0 Grocery Bag Retainer ..................... 1 6 6 Gross Axle W eight Rating .
Instrument Panel and Contr ols .............. 1 7 7 Instrument Panel Lens Cleaning ............. 3 9 1 Interior Appearance Car e .................. 3 8 9 Interior Lights .......................... 1 3 7 Intermittent W ipers (Delay W ipers) ...........
Exterior .............................. 7 9 F o g .......................... 136,185,405 Hazard W arning Flasher ................. 3 3 6 Headlights ........................... 1 3 5 High Beam .......................... 1 3 9 High Beam/Low Beam Select .
Maintenance Procedur es ................... 3 6 4 Maintenance Schedule .................... 4 1 0 Malfunction Indicator Light (Check Engine) . . 188,362 Manual, Service ......................... 4 3 1 Manual T ransmission Lubricant Selection .........
Synthetic ............................ 3 6 7 V iscosity ......................... 366,406 Onboard Diagnostic System .............. 361,362 Opener , Garage Door (HomeLink 威 ) ........... 1 5 5 Operator Manual (Owner’s Manual) ............ 4 Outside Rearview Mirrors .
Radial Ply T ires ......................... 2 9 0 Radiator Cap (Coolant Pressur e Cap) ....... 375,378 Radio Operation ........................ 2 3 9 Rear Axle (Dif ferential) .................... 3 8 6 Rear Cargo Area Utility Rails ............... 1 6 8 Rear Convenience Storage Crates .
Satellite Radio Antenna ................. 209,234 Schedule, Maintenance .................... 4 1 0 Seat Belt Maintenance .................... 3 9 1 Seat Belt Reminder ....................... 4 6 Seat Belts .......................... 35,36,77 And Pregnant W omen .
Signals, T urn ................... 79,138,179,399 Snow Chains (T ire Chains) ................. 2 9 4 Snow Plow ............................ 3 2 8 Snow T ires ............................ 2 9 5 Spare T ire ............................. 3 3 9 Speed Control (Cr uise Control) .
Aging (Life of T ires) .................... 2 9 2 Air Pressur e .......................... 2 8 7 Chains .............................. 2 9 4 Changing ............................ 3 3 7 General Information .................... 2 8 7 High Speed ........
Minimum Requirements ................. 3 2 2 T railer and T ongue W eight ............... 3 2 1 W iring .............................. 3 2 5 T railer T owing Guide ..................... 3 2 1 T railer W eight .......................... 3 2 1 T ransaxle .
W arning Lights (Instrument Cluster Description) ............. 1 7 9 W arnings and Cautions ..................... 6 W arranty Information ..................... 4 3 0 W ashers, W indshield ..................... 1 4 2 W ashing V ehicle .................
Chrysler Group LL C OWN E R’S MAN U AL 2011 2011 DAKOT A First Edition Printed in U.S.A. DAKOT A 11ND33-126-AB.
An important point after buying a device Dodge 2011 Dakota (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dodge 2011 Dakota yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dodge 2011 Dakota - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dodge 2011 Dakota you will learn all the available features of the product, as well as information on its operation. The information that you get Dodge 2011 Dakota will certainly help you make a decision on the purchase.
If you already are a holder of Dodge 2011 Dakota, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dodge 2011 Dakota.
However, one of the most important roles played by the user manual is to help in solving problems with Dodge 2011 Dakota. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dodge 2011 Dakota along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
