Instruction/ maintenance manual of the product 2010 Dodge
Go to page of 478
Charger O W N E R ’ S M A N U A L 2010.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
1 INTRODUCTION 5.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W or d About Y our Keys ................. 1 2 ▫ W ireless Ignition Node (WIN) ............ 1 2 ▫ K e y F O B ........................... 1 3 ▫ Removing Key FOB From Ignition ......... 1 3 ▫ Key-In-Ignition Reminder .
▫ Using The Panic Alarm ................. 2 3 ▫ Programming Additional T ransmitters ...... 2 3 ▫ T ransmitter Battery Replacement .......... 2 4 ▫ General Information ................... 2 5 䡵 Remote Starting System — If Equipped ....... 2 5 ▫ How T o Use Remote Start .
▫ Supplemental Restraint System (SRS) - Airbags ............................ 5 0 ▫ Airbag Deployment Sensors And Controls . . . 56 ▫ Event Data Recorder (EDR) .............. 6 3 ▫ Child Restraints ...................... 6 4 䡵 Engine Break-In Recommendations .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up.
Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the r ear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead.
NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for 10 minutes after the ignition switch is turned to the LOCK position.
NOTE: The Key-In-Ignition reminder only sounds when the Key Fob is placed in the LOCK or ACC ignition position. SENTR Y KEY 姞 The Sentry Key 威 Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated.
Replacement Keys NOTE: Only Key Fobs that are pr ogrammed to the vehicle electronics can be used to start and operate the vehicle. Once a Key Fob is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! • Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unat- tended.
• This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation. VEHICLE SECURITY ALARM — IF EQUIPPED The V ehicle Security Alarm monitors the vehicle doors for unauthorized entry and the ignition switch for unau- thorized operation.
NOTE: • The driver’s door key cylinder and the trunk button on the RKE transmitter cannot arm or disarm the V ehicle Security Alarm. • The V ehicle Security Alarm r emains armed during trunk entry . Pressing the TRUNK button will not disarm the V ehicle Security Alarm.
The lights will fade to off after appr oximately 30 seconds or they will immediately fade to off once the ignition switch is turned ON from the LOCK position.
T o Unlock the Doors Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice within five seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
NOTE: Pressing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate the security alarm. Opening a door with the V ehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the security alarm.
T urn Headlights On with Remote Key Unlock This feature activates the headlights for up to 90 seconds when the doors are unlocked with the RKE transmitter .
4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the RKE transmit- ter while you are in the vehicle will activate the security alarm. Opening a door with the security alarm activated will cause the alarm to sound.
T ransmitter Battery Replacement The recommended r eplacement battery is one CR2032 battery . NOTE: • Do not touch the battery terminals that are on the back housing or the printed circuit boar d. 1. Battery access is through a door located on the rear of the RKE transmitter .
3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference.
How to Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in P ARK • Doors closed • Hood closed • T runk closed • Hazard switch o.
NOTE: • The park lamps will turn on and remain on during Remote Start mode. • For security , power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter .
DOOR LOCKS Manual Door Locks T o lock each door , push the door lock plunger on each door trim panel downward. T o unlock each door , pull the door lock plunger on each door trim panel upward. If the door lock plunger is down when you shut the door , the door will lock.
Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the Key Fob is in the ignition, and any front door is open, the power locks will not operate.
Automatic Door Locks Programming The Automatic Door Locks featur e can be enabled or disabled as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer to “.
4. The driver door is opened. 5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature c.
T o Engage the Child Protection Door Lock System 1. Open the rear door . 2. Insert the tip of the emergency key (or similar object) into the child lock control and pull it upwar d. NOTE: For emergency key information, r efer to “A W ord About Y our Keys”.
W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged.
3. Repeat Steps 1 and 2 for the opposite rear door . NOTE: After disengaging the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. WINDOWS Power Windows The window controls on the driver’s door contr ol all the door windows.
NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches will remain active for 10 minutes after the ignition switch is turned to the OFF position. Opening either front door will cancel this featur e.
T o stop the window from going all the way down during the AUTO-down operation, pull up on the switch briefly . AUTO-Up Feature with Anti–Pinch Protection — If Equipped Lift the window switch to the second detent, release, and the window will go up automatically .
Reset Anytime the vehicle battery is disconnected or goes dead, the AUTO-up function will be disabled. T o reactivate the AUTO-up featur e, perform the following procedur e after vehicle power is restor ed: 1.
NOTE: The transmission must be in P ARK before the button will operate. The trunk lid can be r eleased from outside the vehicle by pressing the TRUNK button on the Remote Keyless Entry (RKE) transmitter twice within five seconds.
T runk Emergency Release The trunk of your vehicle is equipped with an emer gency release handle. It is located on the inside of the tr unk lid, near the latch, and is coated so that it glows in a darkened trunk.
If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) feature also can be used to hold infant and child restraint systems. For mor e information on LA TCH, see Lower Anchors and T ether for CHildren (LA TCH).
ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or impacts.
W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
W ARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. Y ou are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together .
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job as well.
Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the shoulder belt can be adjusted upward or downwar d to position the belt away from your neck. Push and fully depr ess the button above the webbing to release the anchorage, then move it up or down to the position that fits you best.
3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing. Automatic Locking Retractors (ALR) Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked.
by assuring that the belt is tight about the occupant early in a collision. Pretensioners work for all size occupants, including those in child restraints. NOTE: These devices are not a substitute for pr oper seat belt placement by the occupant. The seat belt still must be worn snugly and positioned properly .
2. T urn the ignition switch to the ON position, but do not start the engine. W ait for the Seat Belt Reminder Light to turn off and then pr oceed to the next step. NOTE: Y ou must perform the following steps within 60 seconds of turning the ignition switch to the ON position.
dealer can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough. When it is not requir ed, remove the ex- tender and store it. W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision.
NOTE: These airbags are certified to the new Federal regulations for Advanced Airbags. The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation based on the severity and type of collision.
determined by the Occupant Restraint Controller (ORC), which may receive information fr om the impact sensors at the front of the car . The first stage inflator is triggered immediately during an impact that requir es airbag deployment. The timing of the second stage determines whether the output force is low , medium, or high.
airbag features inflated chambers placed adjacent to the head of each outboard occupant that r educe the potential for side-impact head injuries. The curtains deploy down- ward, covering both windows on the impact side. NOTE: • Should a vehicle rollover occur , the pretensioners and/or SABIC airbags on both sides of the vehicle may deploy .
W ARNING! • If your vehicle is equipped with left and right Side Airbag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the side curtain airbag is located should remain free from any obstructions.
ride properly buckled up in the r ear seat. Never allow children to slide the shoulder belt behind them or under their arm. If a child from 1 to 12 years old (not in a r ear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child r estraint.
W ARNING! (Continued) • Being too close to the steering wheel or instrument panel during front airbag deployment could cause serious injury , including death. Airbags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instru- ment panel.
The side airbags will not deploy in all side collisions. Side airbag deployment will depend on the severity and type of collision. Because airbag sensors measure vehicle deceleration over time, vehicle speed and damage by themselves are not good indicators of whether or not an airbag should have deployed.
W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away .
A quantity of non-toxic gas is generated to inflate the side curtain airbag. The inflating side curtain airbag pushes the outside edge of the headliner out of the way and covers the window .
• T urn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlock the doors automatically . If a Deployment Occurs The airbags are designed to deflate immediately after deployment. NOTE: Front and/or side airbags will not deploy in all collisions.
Do not drive your vehicle after the airbags have de- ployed. If you are involved in another collision, the airbags will not be in place to protect you.
W ARNING! (Continued) • Do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. T ake your vehicle to an autho- rized dealer for any advanced airbag system ser- vice.
located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good. Event Data Recorder (EDR) In the event of an accident, your vehicle is design.
accessing the electronic data stor ed, unless order ed to download data by a court with legal jurisdiction (i.e., pursuant to a warrant). A copy of the data will be provided to the custodial entity upon r equest.
United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it. Children 12 years and younger should ride pr operly buckled up in a rear seat, if available.
infant carriers do, so they can be used rearwar d-facing by children who weigh mor e than 20 lbs (9 kg) but are less than one year old. Both types of child restraints ar e held in the vehicle by the lap/shoulder belt or the LA TCH child restraint anchorage system.
over the front of the seat when their back is against the seatback should use the lap/shoulder belt in a rear seat. • Make sure that the child is upright in the seat. • The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically .
Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it befor e you buy it. • The restraint must be appr opriate for your child’s weight and height. Check the label on the restraint for weight and height limits.
strap kits or retr ofit kits. Y ou are urged to take advantage of all the available attachments provided with your child restraint in any vehicle. All three r ear-seating positions have lower anchorages that are capable of accommodating LA TCH-compatible child seats.
Again, carefully follow the installation instr uctions that are pr ovided with the child restraint system. The rear seat lower anchorages ar e round bars located at the rear of the seat cushion wher e it meets the seatback and are just visible when you lean into the rear seat to install the child restraint.
NOTE: • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. • When using the LA TCH attaching system to install a child restraint, please ensur e that all seat belts not being used for occupant restraints ar e stowed and out of reach of childr en.
The seat belt must be in the Automatic Locking Mode in order to enable a child r estraint to be tightly installed. Refer to “Automatic Locking Mode”. A locking clip should not be necessary once the automatic locking feature is enabled. Position the shoulder and lap belt on the child restraint.
2. Route the tether strap to provide the most dir ect path for the strap between the anchor and the child seat. 3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child r estraint manufacturer’s instr uc- tions.
T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thr own about and possibly injured, or injur e a passenger during panic braking or in a collision. Pets should be restrained in the r ear seat in pet harnesses or pet carriers that are secur ed by seat belts.
W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
If you are r equired to drive with the tr unk/liftgate open, make sure that all windows ar e closed and the climate control BLOWER switch is set at high speed. DO NOT use the recir culation mode. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 3 ▫ Inside Day/Night Mirror ................ 8 3 ▫ Automatic Dimming Mirror — If Equipped . . . 84 ▫ Outside Mirrors ...................... 8 4 ▫ Outside Mirrors Folding Featur e — If Equipped .
䡵 V oice Command — If Equipped ........... 1 1 5 ▫ V oice Command System Operation ........ 1 1 5 ▫ Commands ........................ 1 1 7 ▫ V oice T raining ...................... 1 2 0 䡵 Seats .............................. 1 2 0 ▫ Manual Seats — If Equipped .
▫ Flash-T o-Pass ....................... 1 3 4 ▫ Overhead Console Map/Reading Lights .... 1 3 4 ▫ Interior Lights ...................... 1 3 4 䡵 W indshield W ipers And W ashers .......... 1 3 6 ▫ Intermittent W iper System .............. 1 3 6 ▫ W indshield W ashers .
▫ Security ........................... 1 4 8 ▫ T roubleshooting T ips .................. 1 4 9 ▫ General Information .................. 1 4 9 䡵 Power Sunroof — If Equipped ............ 1 5 0 ▫ Opening Sunroof — Expr ess ............ 1 5 1 ▫ Closing Sunroof — Expr ess .
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle).
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the featur e on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated.
W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object.
Power Mirrors The power mirror switch is located on the driver’s door trim panel, next to the power door lock switch. A r otary knob selects the left mirror , right mirror or off position. After selecting a mirror , move the knob in the same direction you want the mirr or to move.
Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ Phone al- lows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ).
Uconnect™ Phone allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect™ Phone is driven through your Bluetooth 威 “Hands-Free Pr ofile” cellular phone.
The Uconnect™ Phone can be used with any Hands-Free Profile certified Bluetooth 威 cellular phone. See the Uconnect™ website for supported phones. If your cellu- lar phone supports a differ ent profile (e.g., Headset Profile) you may not be able to use any Uconnect™ Phone features.
• For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and say each part of the command when you are asked for it.
The following are general phone to Uconnect™ Phone pairing instructions: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the beep, say ⬙ Pair a Phone ⬙ and follow the audible prompts.
• The system will prompt you to say the number you want to call. • For example, you can say ⬙ 234-567-8901 ⬙ . • The Uconnect™ Phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by Saying a Name • Press the button to begin.
• When prompted, enter the number designation (e.g., ⬙ Home, ⬙⬙ W ork, ⬙⬙ Mobile, ⬙ or ⬙ Pager ⬙ ). This will allow you to store multiple numbers for each phonebook entry , if desired. • When prompted, r ecite the phone number for the phonebook entry that you are adding.
• Depending on the maximum number of entries down- loaded, there may be a short delay befor e the latest downloaded names can be used. Until then, if avail- able, the previous downloaded phonebook is available for use. • Only the phonebook of the currently connected cellu- lar phone is accessible.
first disconnect or drop the Bluetooth 威 connection to the Uconnect™ Phone, and then send the address book entry via Bluetooth 威 . Please see your phone Owner ’s Manual for specific instructions on how to drop the Bluetooth 威 connection. • If the phonebook entry is longer than 24 characters, it will only use the first 24 characters.
Delete Uconnect™ Phonebook Entry NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Delete.
• Note that only the phonebook in the current language is deleted. • Automatic downloaded phonebook entries cannot be deleted or edited. List All Names in the Uconnect™ Phonebook • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook List Names.
call, press and hold the button until you hear a single beep, indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in p.
Conference Call When two calls are in pr ogress (one active and one on hold), press and hold the button until you hear a double beep indicating that the two calls have been joined into one conference call.
Call Continuation Call continuation is the progr ession of a phone call on the Uconnect™ Phone after the vehicle ignition key has been switched to OFF .
Emergency Assistance If you are in an emer gency and the cellular phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the Uconnect™ Phone is operational, you may reach the emer gency number as follows: • Press the button to begin.
T owing Assistance If you need towing assistance: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ T owing Assistance. ⬙ NOTE: • The towing assistance number dialed is based on the country where the vehicle is pur chased (1-800-528- 2069 for the U.
When calling a number with your Uconnect™ Phone that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can press the button and say the sequence you wish to enter , followed by the word ⬙ Send.
T urning Confirmation Prompts ON/OFF T urning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number befor e you dial it). • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Confirmations.
Mute/Un-Mute (Mute OFF) When you mute the Uconnect™ Phone, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the Uconnect™ Phone: • Press the button. • Following the beep, say ⬙ Mute.
• When prompted, say ⬙ List Phones. ⬙ • The Uconnect™ Phone will play the phone names of all paired cellular phones in or der from the highest to the lowest priority . T o “select” or “delete” a paired phone being announced, press the button and say “Select” or “Delete.
Things Y ou Should Know About Y our Uconnect™ Phone Uconnect™ Phone T utorial T o hear a brief tutorial of the system features, press the button and say “Uconnect™ T utorial.
• Speak normally , without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a V oice Command period.
• In a convertible vehicle, system performance may be compromised with the convertible top down. Phone Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower settin.
1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 1 1.
1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompt.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the V oice Command button, listen for the beep, and say your command. Pressing the V oice Command button while the system is speaking is known as “barging in.
Commands The V oice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the V oice Command button.
Radio FM T o switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select t.
Memo T o switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding, you may press the V oice Command button to stop recor ding.
NOTE: Keep in mind that you have to press the V oice Command button first and wait for the beep before speaking the “Bar ge In” commands. V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers the Uconnect™ V oice “V oice T raining” feature may be used.
Manual Seats — If Equipped The adjusting bar is at the front of the seat, near the floor . Pull the bar upward to move the seat forwar d or rearwar d. Release the bar once the seat is in the position desired. Using body pressur e, move forward and r earward on the seat to be sure that the seat adjusters have latched.
Power Seats — If Equipped The power seat switch is located on the outboard side of the seat near the floor . Use this switch to move the driver’s seat up or down, forward or r earward or to recline the seatback. The passenger’s seat will move up or down, forward or r earward.
Power Reclining Seats — If Equipped The recliner contr ol is located on the outboard side of the seat. Use the recline contr ol to adjust the forward or r earward position of the seatback. W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
Lumbar Support — If Equipped This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for- ward to incr ease and rearwar d to decrease the desir ed amount of lumbar support. Head Restraints Head restraints can r educe the risk of injury in the event of a rear impact.
T o remove the head restraint, pull upwar d on the head restraint to its highest position, push in both buttons at the base of each head restraint r od, and simultaneously pull up on the head restraint.
NOTE: Ensure that the fr ont of the head restraint is facing toward the fr ont of the vehicle. W ARNING! Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long peri- ods of time.
When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seatback above the seat strap. W ARNING! • Be certain that the seatback is securely locked into position.
2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od (if equipped) to secure the hood in the open position. CAUTION! T o prevent possible damage, do not slam the hood to close it.
LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch contr ols the operation of the headlights, parking lights, instru- ment panel lights, instrument panel light dimming, inte- rior lights and fog lights.
Headlights On with Wipers (A vailable with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the headlight switch is placed in the AUTO position.
Daytime Running Lights — If Equipped The high beam headlights will come on as Daytime Running Lights whenever the ignition switch is ON, the headlights are of f and the parking brake is off. The headlight switch must be used for normal nighttime driving.
T urn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the fr ont and rear turn signal lights. NOTE: • If either light remains on and does not flash, or ther e is a very fast flash rate, check for a defective outside light bulb.
Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beams headlights until the lever is released. Overhead Console Map/Reading Lights These lights are mounted between the sun visors on the overhead console.
because a door is open. This includes the glove box light, but not the trunk light. T o restor e interior light operation, either turn the ignition switch ON or cycle the light switch. Dimmer Control The dimmer control is part of the headlight switch and is located on the left side of the instrument panel.
WINDSHIELD WIPERS AND W ASHERS The multifunction lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column.
wipe interval from a minimum of one cycle every second to a maximum of approximately 23 seconds between cycles. Windshield W ashers T o use the washer , push the multifunction lever inward (toward the steering column) to the second detent and hold it for as long as washer spray is desired.
Headlights On with Wipers (A vailable with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the headlight switch is placed in the AUTO position.
• The pedals can be adjusted with the ignition OFF . • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the transmission is in REVERSE or when the Electronic Speed Contr ol is on.
NOTE: In order to ensur e proper operation, the Elec- tronic Speed Contr ol System has been designed to shut down if multiple Speed Control functions ar e operated simultaneously .
• The Electronic Speed Contr ol may not engage if a differ ent size tire is installed on one wheel, such as the compact spare tir e. T o Deactivate The system will disable Electronic Speed Contr ol without erasing the memory if you: • Softly tap the brake pedal.
in SET DECEL. Release the Electronic Speed Contr ol lever when the desired speed is r eached, and a new set speed will be established. T apping the Electronic Speed Control lever to SET DE- CEL once will result in a 1 mph (1.6 km/h) speed decrease. Each time the lever is tapped, speed decr eases.
Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights. Press the lens to turn on the light. Pr ess it a second time to turn off the light.
The HomeLink 威 buttons are located in the over head console, and contain one, two or three dots/lines desig- nating the differ ent HomeLink 威 channels. NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver .
Programming HomeLink 姞 Before Y ou Begin If you have not trained any of the HomeLink 威 buttons, erase all channels before you begin training. T o do this, press and hold the two outside buttons for up to 20 seconds. The EVIC will display “CLEARING CHANNELS.
NOTE: Some gate operators and garage door openers may requir e you to replace Step 3 with pr ocedures noted in the “Gate Operator/Canadian Programming” section. 4. Press and hold the just-trained HomeLink 威 button. If the channel has been trained, the EVIC display will now state “CHANNEL # TRANSMIT .
6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer . NOTE: Y ou have 30 seconds in which to initiate the next step after the LEARN button has been pressed. 7. Return to the vehicle and press the programmed HomeLink 威 button twice (holding the button for two seconds each time).
successfully accepted the frequency signal. The EVIC display will change from “CHANNEL # TRAINING” to “CHANNEL # TRAINED.” If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Pr ogramming HomeLink 威 ” earlier in this section.
The HomeLink 威 Universal T ransceiver is disabled when the V ehicle Security Alarm is active. T roubleshooting Tips If you are having tr ouble programming HomeLink 威 , her e are some of the most common solutions: • Replace the battery in the original transmitter .
POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Opening Sunroof — Express Press the switch r earward and r elease, and the sunroof will open automatically from any position. The sunr oof will open fully and then stop automatically . This is called “Express Open”. During Expr ess Open operation, any movement of the sunroof switch will stop the sunr oof.
Sunshade Operation The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears.
Sunroof Fully Closed Press the switch forwar d and release to ensur e that the sunroof is fully closed. ELECTRICAL POWER OUTLETS There ar e two 12 V olt (13 Amps) electrical power outlets on this vehicle. Both of the power outlets are pr otected by a fuse.
W ARNING! Do not place ashes inside the cubby bin located on the center console on vehicle’s not equipped with the ash receiver tray . A fire leading to bodily injury could result. The center console outlet is powered dir ectly from the battery (power available at all times).
W ARNING! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.
CUPHOLDERS Front Seat Cupholders The cupholders are located in the forwar d edge of the center console. Rear Seat Cupholders The rear seat cupholders ar e located in the center armrest between the rear seats.
STORAGE Console Features The center console contains two shift bezel cubby bins with rubber mats for holding small items. For vehicles not equipped with navigation radio, the console also contains an extra storage bin located below the climate control, which holds up to four CD jewel cases.
The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also con- tains a 12 V olt power outlet and a molded-in coin holder (designed to hold various size coins).
W ARNING! (Continued) • T o help protect against personal injury , passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only , not for passengers, who should sit in seats and use seat belts.
defroster automatically turns of f after approximately 10 minutes. For an additional five minutes of operation, press the button a second time. CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window .
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 6 4 䡵 Instrument Cluster – Base ............... 1 6 5 䡵 Instrument Cluster – Pr emium ............ 1 6 6 䡵 Instrument Cluster Descriptions ......
▫ Operating Instructions — V oice Command System — If Equipped ................. 1 9 6 ▫ Operating Instructions — Uconnect™ phone — If Equipped ...................... 1 9 6 ▫ Clock Setting Procedur e — RBZ Radio ..... 1 9 6 ▫ Clock Setting Procedur e — RER/REN Radio .
▫ Play Mode ......................... 2 2 3 ▫ List Or Browse Mode ................. 2 2 5 䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/RER/RES Radios Only) .... 2 2 7 ▫ System Activation .................... 2 2 7 ▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 7 — Climate Control 13 — Hood Release 2 — Instrument Cluster 8 — Heated Seat Switch* 14 — T runk Release Button 3 — Hazard Switch 9 — Power O.
INSTRUMENT CLUSTER – BASE 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 165.
INSTRUMENT CLUSTER – PREMIUM 166 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Premium Cluster Press this button to change the display fr om odometer to either of two trip odometer settings.
6. Charging System W arning Light This light shows the status of the electrical charg- ing system. The light should turn on when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on or turns on while driving, turn off some of the vehicle’s non-essential electrical devices (i.
The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle.
10. Airbag W arning Light This light will turn on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is either not on during starting, turns on while driving, or stays on, have the system inspected at an authorized dealer as soon as possible.
W ARNING! If a warning light remains on the system may not be working and you will not have the benefit of ESP or BAS. Under certain driving conditions, where ESP or BAS would be beneficial, you - if you have not adjusted your driving speeds and stopping in or to account for the lack of the feature, may be in acci- dent.
17. Shift Lever Indicator — Automatic T ransmission Only The Shift Lever Indicator is self-contained within the instrument cluster . It displays the gear position of the automatic transmission. 18. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on.
On vehicles equipped with a Premium Instr ument Clus- ter , this display shows the Electronic V ehicle Information Center (EVIC) messages when the appropriate conditions exist. Refer to Electronic V ehicle Information Center (EVIC) for further information.
Lo tirE When the appropriate condition exists, the odometer display will toggle between Lo and tirE for three cycles. noFUSE If the vehicle diagnostic system determines that the Ignition Off Draw (IOD) fuse is impr operly installed, or damaged, a “noFUSE” message will display in the odom- eter display area.
20. Brake W arning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low , or that there is a problem with the anti-lock brake system reservoir .
V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD). In the event of an EBD failure, the Brake W arning Light will turn on along with the ABS Light. Immediate repair to the ABS system is requir ed.
As an added safety feature, your vehicle has been equipped with a T ire Pressur e Monitoring System (TPMS) that illuminates a low tire pr essure telltale when one or more of your tir es is significantly under-inflated.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
the key is in the ON position before engine start. If the MIL does not come on when turning the key from LOCK to ON, have the condition checked promptly . Certain conditions such as a loose or missing gas cap, poor fuel quality , etc., may illuminate the MIL after engine start.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) – IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display that is located in the instrument cluster . This system allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel.
• Surround Sound modes (if equipped with Driver - Selectable Surround [DSS]) The system allows the driver to select information by pressing the following buttons mounted on the steering wheel.
Electronic V ehicle Information Center (EVIC) Displays When the appropriate conditions exist, the EVIC displays the following messages: • T urn Signal On (with a continuous warning chime if the vehicle is driven more than 1 mile [1.
• Channel # T rained • Clearing Channels • Channels Cleared • Did Not T rain • Insert Key/T urn T o Run (refer to “Remote Starting System” in “Things T o Know Before Starting Y our V e.
T rip Functions Press and r elease the MENU button until one of the following T rip Functions displays in the EVIC: • A verage Fuel Economy/Fuel Saver Mode • Distance T o Empty • T rip A • T rip B • Elapsed T ime • Display Units of Measure in Press the SCROLL button to cycle through all the T rip Computer functions.
This feature allows you to monitor when you ar e driving in a fuel efficient manner , and it can be used to modify driving habits in order to incr ease fuel economy . • Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank.
and average fuel economy , according to the current fuel tank level. DTE cannot be reset thr ough the FUNCTION SELECT button. NOTE: Significant changes in driving style or vehicle loading will greatly af fect the actual drivable distance of the vehicle, regar dless of the DTE displayed value.
T o Reset The Display Reset will only occur while a resettable function is being displayed. Press and r elease the FUNCTION SELECT button once to clear the resettable function being dis- played.
When the vehicle automatically transitions from A WD to R WD the EVIC will display the following message for five seconds. Refer to “All Wheel Drive — If Equipped” in “Starting And Operating” for more information on the All Wheel Drive (A WD) system.
Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and r elease the HOME button to display one of eight compass readings and the outside temperatur e.
5. Complete one or more 360 degree turns (in an ar ea free from lar ge metal or metallic objects) until the “CAL” message turns off. The compass will now function normally . Compass V ariance Compass V ariance is the difference between Magnetic North and Geographic North.
3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and release FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and release the HOME button to exit.
Press and r elease the MENU button until Personal Set- tings displays in the EVIC. Use the SCROLL button to display one of the following choices. “Language” When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped).
press and r elease the FUNCTION SELECT button until “Driver Door 1st Press” or “All Doors 1st Pr ess” appears. “Sound Horn with Remote Key Lock” When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed.
when exiting the vehicle. T o make your selection, press and release the FUNCTION SELECT button until “0,” “30,” “60,” or “90” appears.
“Confirmation of V oice Commands” — If Equipped When ON is selected, all voice commands from the Uconnect™ system are confirmed. T o make your selec- tion, press and r elease the FUNCTION SELECT button until “ON” or “OFF” appears.
Refer to your Uconnect™ Multimedia REN, RER or RBZ user’s manual for detailed operating instructions. Operating Instructions — V oice Command System — If Equipped For the radio, refer to “V oice Command” in “Understand- ing The Features Of Y our V ehicle”.
2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” T ouch the screen wher e the words “Daylight Savings” ar e dis- played to change the current setting.
satellite clock is Greenwich Mean T ime (GMT). This is the worldwide standard for time. This makes the system’s clock very accurate once the appropriate time zone and daylight savings information is set. T o Manually Set the Clock — RER/REN 1. T urn on the radio.
Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the radio is turned of f. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed.
MEDIA CENTER 130 (RES) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display .
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
the current selection. Pr essing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD and MP3 modes. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display .
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally .
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to lo.
MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Pr ess the TUNE/SCROLL control knob to save time change.
Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decr ease the bass tones. Push the rotary TUNE/SCROLL control knob a second time and MID will display .
T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls.
By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory .
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
the current selection. Pr essing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD and MP3 modes. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display .
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally .
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to lo.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers.
This feature allows you to plug an iPod 威 into the vehicle’s sound system through a 16–pin connector , using the provided interface cable. UCI supports Mini, 4G, Photo, Nano, 5G iPod 威 and iPhone 威 devices. Some iPod 威 software versions may not fully support the UCI features.
Using This Feature By using the provided connection cable to connect an iPod 威 to the vehicle’s UCI 16–pin connector port: • The iPod 威 audio can be played on the vehicle’s sound system, providing metadata (artist, track title, album, etc.
• Jump backward in the curr ent track by pressing and holding the << RW button. Holding the << RW button long enough will take you to the beginning of the current track. • Jump forward in the curr ent track by pressing and holding the FF >> button.
• RND button (available on sales code RES radio only): Pressing this button toggles between Shuf fle ON and Shuffle OFF modes for the iPod 威 .I ft h e RND icon is showing on the radio display , then the shuffle mode is ON. List Or Browse Mode During Play mode, pressing any of the buttons described below , takes you to List mode.
• Pressing a PRESET button will display the curr ent list on the top line and the first item in that list on the second line. • T o Exit List mode without selecting a track, press the same PRESET button again to go back to Play mode . • LIST button: The LIST button will display the top level menu of the iPod 威 .
Uconnect™ Multimedia (SA TELLITE RADIO) — IF EQUIPPED (REN/RER/RES RADIOS ONL Y) Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio.
Sirius ID number will display . The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access W ith REN/RER Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen.
Operating Instructions - Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. T oggle the MUSIC TYPE button again to select the music type.
pushbutton memory . The channels stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations).
any stereo audio sour ce. A new feature of the KICKER 威 audio system offers the ability to choose surr ound sound for any audio source. “Audio Surround” is optimized for fr ont seat passengers for any audio source.
• The LCD screen swings up fr om the rear of the armr est to allow the rear seat passenger(s) to view the display . NOTE: Close the armrest after the LCD scr een has been raised to its viewing position. • The radio and DVD player controls allow fr ont seat operation for easy setup in the case of younger rear seat passengers.
• A battery-power ed infrared r emote control snaps into a molded compartment in the center console armrest upper storage bin. • T wo wireless infrared headsets allow r ear seat passen- gers to listen to the same or individual audio sources.
REMOTE SOUND SYSTEM CONTROLS The remote sound system contr ols are located on the surface of the steering wheel at the three and nine o’clock positions. V ehicles equipped with steering wheel-mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC).
When the EVIC is in the Compass/T emp/ Audio screen, pr ess the FUNCTION SE- LECT button to operate various radio, me- dia, and Universal Customer Interface (UCI) functions (i.e., advance presets, se- lect next folder , jump to or start playing songs in playlists, etc.
7. Do not store the disc where temperatur es may become too high. NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have protection encoding.
Blower Control The rotary knob on the left contr ols the blower . The control has an OFF posi- tion and four speed settings. The blower will remain on until the con- trol is turned to the OFF position or the ignition is turned OFF .
• Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles. NOTE: T o improve fuel economy , leave in defrost only when necessary .
re-used. Use this mode to cool the inside of the vehicle rapidly . The Recirculation mode can also be used to temporarily block out outside odors, smoke, and dust.
Operation of the system is quite simple. Begin by turning the mode control knob (on the right) to AUTO, and place the blower control knob (on the left) to either LO AUTO or HI AUTO.
illuminate. After 10 minutes, the system will return to normal AUTO mode function and the indicator will turn off. NOTE: • The surface of the climate control panel and the top center of the instrument panel should be kept fr ee of debris due to the location of the climate control sensors.
4 UNDERST ANDING YOUR INSTRUMENT P ANEL 243.
The operator can override the AUTO mode setting to change airflow distribution by rotating the mode contr ol knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield.
conditioning. An indicator in the button illuminates when manual compressor operation is selected. NOTE: T o control the air conditioning manually , the mode selector must be moved out of the AUTO position. • Recirculation Contr ol This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired.
W inter Operation Use of the air Recirculation mode during W inter months is not recommended because it may cause window fogging. V acation Storage Any time you store your vehicle or keep it out of service (i.
Control Setting Suggestions for V arious W eather Conditions 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 247.
.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 5 3 ▫ Automatic T ransmission ............... 2 5 3 ▫ Normal Starting (T ip Start) ............. 2 5 4 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) .....
▫ Gear Ranges ........................ 2 6 6 䡵 AutoStick 威 — If Equipped ............... 2 7 0 ▫ Operation ......................... 2 7 0 䡵 All-Wheel Drive (A WD) — If Equipped ...... 2 7 1 䡵 Driving On Slippery Surfaces .............
▫ T ire Identification Number (TIN) ......... 2 9 0 ▫ T ire T erminology And Definitions ......... 2 9 1 ▫ T ire Loading And T ire Pr essure .......... 2 9 2 䡵 T ires — General Information ............. 2 9 6 ▫ T ire Pressur e ............
▫ Gasoline/Oxygenate Blends ............. 3 1 9 ▫ E85 Usage In Non-Flex Fuel V ehicles ...... 3 2 0 ▫ MMT In Gasoline .................... 3 2 0 ▫ Materials Added T o Fuel ............... 3 2 1 ▫ Fuel System Cautions ................. 3 2 1 ▫ Carbon Monoxide W arnings .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle.
Normal Starting (Tip Start) NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages.
W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 V olt AC electrical outlet with a grounded, thr ee-wire extension cor d. The engine block heater cord is r outed under the hood on the driver side of the vehicle.
W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
• The electronically-contr olled transmission provides a precise shift schedule. The transmission electr onics are self-calibrating. Therefor e, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pr e- cision shifts will develop within a few shift cycles.
This may result in a slightly dif ferent feeling or r esponse during normal operation in the DRIVE position. After the transmission cools down, it will return to normal operation.
4. Using the screwdriver , press and hold the override tab through the access port on the center console. 5. Move the shift lever into the NEUTRAL position.
Gear Ranges P ARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never use P ARK while the vehicle is in motion.
• When shifting into P ARK move the shift lever all the way forward and left until it stops and is fully seated. • Look at the shift indicator display on the instrument panel to ensure it is in the P ARK position. REVERSE This range is used for moving the vehicle rearwar d.
range, such as when operating the vehicle under heavy loading conditions (in hilly terrain, traveling into strong head winds, or while towing heavy trailers). NOTE: • If the vehicle is started in cold temperatures, shifts into Overdrive may be delayed.
CAUTION! Never race the engine with the brakes on and the vehicle in gear , and never hold the vehicle on an incline without applying the brakes. These practices can cause overheating and damage to the transmis- sion. T orque Converter Clutch A feature designed to improve fuel economy has been added to the automatic transmission in this vehicle.
T ransmission Limp Home Mode The transmission is monitored for abnormal conditions. If a condition is detected that could cause damage, the transmission automatically shifts into second gear . The transmission remains in second gear despite the forwar d gear selected.
Five-Speed Automatic T ransmission – If Equipped Shifting from DRIVE to P ARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears.
W ARNING! Never use the P ARK position as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage.
CAUTION! Coasting the vehicle or driving for any other reason with shift lever in NEUTRAL can result in transmis- sion damage. W ARNING! Do not coast in NEUTRAL and never turn of f the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions.
If vehicle acceleration worsens, or the transmission no longer shifts, the transmission is most likely operating in the Limp Home Mode. In this mode, the transmission will remain in the curr ent gear until the vehicle is brought to a stop. After the vehicle has stopped, P ARK, REVERSE, and NEUTRAL will continue to operate.
Electronic Range Select (ERS) – If Equipped Electronic Range Select (ERS) allows the driver to limit the highest available transmission gear , providing you with more contr ol of the vehicle. ERS allows you to maximize engine braking, eliminate undesirable upshifts, and improve overall vehicle performance.
move the shift lever to the right or left (D+/D-) while in the DRIVE position. The gear position will display in the instrument cluster . In the AutoStick 威 mode, the transmis- sion will shift up and down when left or right (D-/D+) is manually selected by the driver .
vehicle automatically shifts into A WD mode. Automatic A WD operation could be activated by outside tempera- ture, wheel slip, or other pr edetermined conditions (there may be a slight delay for A WD engagement after a wheel slip condition occurs).
W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the rear wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet mud, loose sand, etc.
Flowing/Rising W ater W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly .
CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission/transaxle, axle, etc.) for signs of con- tamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water .
POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle.
checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized dealer . CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
The foot operated parking brake is located below the lower left corner of the instrument panel. T o apply the park brake, firmly push the park brake pedal fully . T o release the parking brake, pr ess the park brake pedal a second time and let your foot up as you feel the brake disengage.
make it difficult to move the shift lever out of P ARK. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage.
ANTI-LOCK BRAKE SYSTEM The Anti-Lock Brake System (ABS) provides incr eased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to pr event wheel lock-up.
W ARNING! • The ABS contains sophisticated electronic equip- ment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capa- bility .
All vehicle wheels and tires must be the same size and type and tires must be pr operly inflated to produce accurate signals for the computer . ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equippe.
Brake Assist System (BAS) This system complements the ABS by optimizing the vehicle braking capability during emergency brake ma- neuvers. This system detects an emergency braking situ- ation by sensing the rate and amount of brake application and then applies optimum pressur e to the brakes.
power may also be reduced to assist in counteracting the condition of oversteer or understeer and help the vehicle maintain the desired path. The ESP uses sensors in the vehicle to determine the path that the driver intends to steer the vehicle and compares it to the actual path of the vehicle.
The ESP system has two available operating modes: ESP On This is the normal operating mode for the ESP . Whenever the vehicle is started, the ESP system will be in this mode. This mode should be used for most driving conditions. The ESP should only be turned OFF for specific r easons as noted in the following paragraphs.
Indicator Light” should go out. However , if the light remains on, have the ESP and BAS checked at your authorized dealer as soon as possible. ESP/BAS Malfunction Indicator Light and ESP/TCS Indicator Light The Malfunction Indicator Light for the ESP is combined with the BAS indicator .
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. design standards and it begins with the tir e diameter molded into the sidewall.
EXAMPLE: 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) r unning from the sill to the r oof.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard te.
3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
5 ST ARTING AND OPERA TING 295.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.
loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous.
W ARNING! T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). T emporary use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced.
W ARNING! The limited-use spare tires are for emergency use only . Installation of this limited-use spare tire affects vehicle handling. W ith this tire, do not drive more than 50 mph (80 km/h). Keep inflated to the cold tire inflation pressure listed on either your tire placard or limited-use spare tire and wheel assembly .
T read Wear Indicators T read wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm).
W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
TIRE CHAINS Use only compact chains or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle, as r ecommended by the chain manufacturer . In addition, only install tire chains on P215/65 R17 and P225/60 R18 size tires.
CAUTION! (Continued) • Observe the tire chain manufacturer’s instructions on the method of installation, operating speed, and conditions for use. Always use the lower suggested operating speed of the chain manufac- turer if different from the speed recommended by the manufacture.
TIRE ROT A TION RECOMMENDA TIONS T ires on the front and r ear axles of vehicles operate at differ ent loads and perform differ ent steering, driving, and braking functions. For these reasons, they wear at unequal rates and tend to develop irregular wear pat- terns.
TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle r ecom- mended cold placard pr essure. The tire pr essure will vary with temperatur e by about 1 psi (6.9 kPa) for every 12°F (6.
For example, your vehicle may have a recommended cold (parked for more than thr ee hours) placard pr essure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tir e pressur e is 27 psi (186 kPa), a temperature dr op to 20°F (-7°C) will decrease the tir e pressur e to approximately 23 psi (158 kPa).
NOTE: • The TPMS is not intended to replace normal tir e care and maintenance or to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tir e causes the tire to over heat and can lead to tire failur e.
The matching full size spare wheel and tir e assembly (if equipped) has a TPM sensor . The matching full size spare can be used in place of any of the four road tir es. The TPMS will only monitor the pressur e in the full size spare when it is used in place of a road tir e.
3. Accumulation of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. V ehicles with Full Size Spare 1. The matching full size spare wheel and tire assembly has a TPM sensor that can be monitored by the TPMS.
Light will turn OFF , as long as no tire pressur e is below the low-pressur e warning limit in any of the four active road tir es. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information.
T ire Pressure Monitoring Low Pressure W arnings The TPM T elltale Light will illuminate in the instrument cluster and a chime will sound when tire pr essure is low in one or mor e of the four active road tir es.
turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning If a system fault is detected, the TPM T elltale Light will flash on and off for 75 seconds and then r emain on solid.
If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the TPM T elltale Light will no longer flash, and the ⬙ CHECK TPM SYSTEM ⬙ message will no longer display , and a pressure value will display in place of the dashes.
2. If you install the compact spare tire in place of a r oad tire that has a pr essure below the low-pr essure warning limit, upon the next ignition switch cycle, the TPM T elltale Light will remain ON and a chime will sound. In addition, the graphic in the EVIC will still display a flashing pressur e value.
The TPM sensors are r egulated under one of the follow- ing licenses: United States ..................... KR5S120123 Canada ........................ 2671-S120123 FUEL REQUIREMENTS 2.
Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the W orld W ide Fuel Charter , WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle.
E85 Usage In Non-Flex Fuel V ehicles Non-FFV vehicles are compatible with gasoline contain- ing 10% ethanol (E10). Gasoline with higher ethanol content may void the vehicle’s warranty .
Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel.
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. If so equipped, use the finger pull to open the door . Otherwise, push in on the left side (near the edge) of the fuel filler door to access the fuel filler cap.
NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor cement. CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap).
W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle.
VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “V ehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. Do not exceed the specified Gross V ehicle W eight Rating (GVWR) or the Gross Axle W eight Rating (GA WR).
W ARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident.
NOTE: • Refer to the “V ehicle Certification Label” affixed to the rear of the driver’s door for your vehicle’s GVWR and GA WRs. • Refer to the “T ire Placard” for your vehicle’s pr oper tire pr essure.
Gross Combination W eight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. NOTE: The GCWR rating includes a 150 lbs (68 kg) allowance for the presence of a driver . Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles.
of hitches are the most popular on the market today and they are commonly used to tow small- and medium- sized trailers. W eight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars.
The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. ( 〫 see note) 2.
T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle.
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and it will not shift during travel.
W ARNING! (Continued) 2. GTW 3. GA WR 4. T ongue weight rating for the trailer hitch utilized. (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight.) T owing Requirements – T ires − Do not attempt to tow a trailer while using a compact spare tir e.
T owing Requirements – T railer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer . This could cause inadequate braking and possible personal injury . − An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes.
W ARNING! (Continued) • T owing any trailer will increase your stopping distance. When towing, you should allow for ad- ditional space between your vehicle and the ve- hicle in front of you.
T owing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away fr om heavy traffic. Automatic T ransmission The DRIVE range can be selected when towing.
Electronic Speed Control – If Equipped − Do not use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops gr eater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − Use speed control in flat terrain and with light loads to maximize fuel efficiency .
RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T wo-Wheel Drive and All-Wheel Drive Recreational towing (with all four wheels on the gr ound) is allowed ONL Y if the rear driveshaft is removed and the transmission is in NEUTRAL (for both RWD and A WD vehicles).
.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 4 4 䡵 If Y our Engine Overheats ................ 3 4 4 䡵 Jacking And T ire Changing ............... 3 4 5 ▫ Jack Location/Spare T ire Stowage ........ 3 4 6 ▫ Preparations For Jacking .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the switch bank near the top center of the instrument panel. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H,” turn the engine off immediately and call for service.
W ARNING! (Continued) • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
3. Remove the fastener securing the spare tire. 4. Remove the spare tire. 5. Remove the fastener securing the jack. W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided.
Preparations for Jacking 1. Park the vehicle on a firm, level surface as far from the edge of the roadway as possible. A void icy or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid being hit when operating the jack or changing the wheel.
Jacking and Changing a Tire W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle.
1. Remove the spare tire, jack, and lug wr ench. 2. If equipped with steel wheels, do not remove the wheel cover at this time. If equipped with aluminum wheels where the center cap covers the lug nuts, use the lug wrench to pry the center cap of f carefully befor e raising the vehicle.
3. Before raising the vehicle, use the lug wrench to loosen, but not remove, the lug nuts on the wheel with the flat tire. T urn the lug nuts counterclockwise one turn while the wheel is still on the ground. 4. Place the jack underneath the lift area that is closest to the flat tire.
Jack Engagement Locations 352 WHA T T O DO IN EMERGENCIES.
5. Raise the vehicle just enough to remove the flat tire and install the spare tir e. W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. Compact Spare Tire The compact spare tir e is for temporary emergency use with radial tires.
Wheel Cover or Center Cap Installation — If Equipped NOTE: Do not attempt to install a center cap or wheel cover on the compact spare. 1. Mount the road tire on the axle. For vehicles equipped with wheel covers, perform Steps 2 and 3. For vehicles equipped with center caps, proceed to Step 4.
3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover . 4. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel.
JUMP-ST ARTING PROCEDURES If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done impr operly so please follow the procedur es in this section carefully .
NOTE: The remote battery posts ar e viewed by standing on the right side of the vehicle looking over the fender . Remote Battery Posts W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on.
3. If using a another vehicle to jump-start the battery , park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF . W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result.
W ARNING! Do not connect the cable to the negative post (-) of the discharged battery . The resulting electrical spark could cause the battery to explode and could result in personal injury .
FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area ar ound the front wheels. Then shift back and forth between RE- VERSE and DRIVE.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone.
V ehicles equipped with A WD can be towed with the transmission in NEUTRAL and the rear wheels OFF the ground (or the r ear driveshaft removed) with no limita- tion on speed or distance. CAUTION! • Do not attempt to tow this vehicle from the front with sling-type towing equipment.
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.7L ............. 3 6 7 䡵 Engine Compartment — 3.5L ............. 3 6 8 䡵 Engine Compartment — 5.7L ............. 3 6 9 䡵 Onboard Diagnostic System — OBD II ...... 3 7 0 ▫ Loose Fuel Filler Cap .
▫ Adding W asher Fluid ................. 3 8 4 ▫ Exhaust System ..................... 3 8 5 ▫ Cooling System ..................... 3 8 8 ▫ Brake System ....................... 3 9 3 ▫ Automatic T ransmission ............... 3 9 5 ▫ All Wheel Drive (A WD) – If Equipped .
ENGINE COMP ARTMENT — 2.7L 1 — Integrated Power Module 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Remote Jump Start (Po.
ENGINE COMP ARTMENT — 3.5L 1 — Integrated Power Module 6 — Engine Oil Fill 2 — Air Cleaner Filter 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir Access Cover 8 — Remote Jump Start (Po.
ENGINE COMP ARTMENT — 5.7L 1 — Integrated Power Module 6 — Air Cleaner Filter 2 — Coolant Pressur e Cap 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipstick.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
TRIP ODOMETER button to turn of f the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, impr operly installed, or damaged fuel filler cap may also turn on the MIL.
4. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
your vehicle. Refer to these manuals before attempting any procedur e yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle.
CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning.
regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings.
CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New V ehicle Limited W arranty . Engine Oil V iscosity (SAE Grade) – 2.7L and 5.7L Engines SAE 5W -20 engine oil is recommended for all operating temperatures.
Synthetic Engine Oils Y ou may use synthetic engine oils provided the recom- mended oil quality requir ements are met, and the r ecom- mended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oil Do not add any supplemental materials, other than leak detection dyes, to the engine oil.
Engine Air Cleaner Filter Refer to “Maintenance Schedule” for further information. W ARNING! The air induction system (air cleaner , hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
W ARNING! (Continued) • The battery in this vehicle has a vent hose that should not be disconnected and should only be replaced with a battery of the same type (vented).
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
1. Remove the access door in the cowl screen by pressing the retaining clips. 2. Slide the lid on the filter adapter forward and down and remove the used filter . 3. Install the new filter with arrows pointing in the direction of airflow , which is toward the rear of the vehicle (text and arrows on the filter will indicate this).
Refer to “Maintenance Schedule” for the proper mainte- nance intervals. Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, .
Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner . This will remove accumula- tions of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades.
The fluid reservoir will hold nearly 1 gal (4 L) of washer fluid when the message “Low W asher Fluid” appears in the Electronic V ehicle Information Center (EVIC) (if equipped). W ARNING! Commercially available windshield washer solvents are flammable.
CAUTION! The catalytic converter requires the use of unleaded fuel only . Leaded gasoline will destroy the effective- ness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the LOCK position. The fan is tempera- ture controlled and can start at any time the ignition switch is in the ON position.
Cooling System – Drain, Flush, and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals.
CAUTION! (Continued) • This vehicle has not been designed for use with propylene glycol-based engine coolant (anti- freeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
Please note that it is the owner’s responsibility to main- tain the proper level of pr otection against freezing ac- cording to the temperatur es occurring in the area wher e the vehicle is operated.
rules for your community . T o prevent ingestion by ani- mals or children, do not stor e ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the gr ound. If ingested by a child or pet, seek emergency assistance immediately .
coolant (antifreeze) needs to be added, contents of coolant recovery bottle must also be pr otected against freezing. • If frequent engine coolant (antifr eeze) additions are requir ed, or if the level in the coolant recovery bottle does not drop when the engine cools, the cooling system should be pressur e tested for leaks.
Master Cylinder – Brake Fluid Level Check Check the fluid level in the master cylinder immediately if the brake system warning light indicates system fail- ure. Check the fluid level in the master cylinder when per- forming underhood services. Clean the top of the master cylinder area befor e removing the cap.
W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point.
CAUTION! • Using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes.
Special Additives Automatic T ransmission Fluid (A TF) is an engineered product and its performance may be impair ed by supple- mental additives. Therefor e, do not add any fluid addi- tives to the transmission. The only exception to this policy is the use of special dyes to aid in detecting fluid leaks.
Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage.
• Use a high quality cleaner wax, such as MOP AR 威 Cleaner W ax or equivalent to remove road film, stains and to protect your paint finish. T ake care never to scratch the paint. • A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish.
• Use MOP AR 威 T ouch Up Paint or equivalent on scratches as soon as possible. Y our authorized dealer has touch up paint to match the color of your vehicle. Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels should be cleaned r egularly with a mild soap and water to prevent corr osion.
Interior T rim should be cleaned starting with a damp cloth, or MOP AR 威 Satin Select or equivalent. Do not use harsh cleaners or Armor All 威 . Use MOP AR 威 T otal Clean or equivalent to clean vinyl upholstery . MOP AR 威 T otal Clean or equivalent is specifically recom- mended for leather upholstery .
Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOP AR 威 Glass Cleaner or any commercial household-type glass cleaner . Never use an abrasive type cleaner . Use caution when cleaning the inside rear win- dow equipped with electric defrosters or the right r ear quarter window equipped with the radio antenna.
NOTE: The cupholder cannot be removed. FUSES Integrated Power Module The Integrated Power Module (IPM) is located in the engine compartment. This module contains fuses and relays.
CAUTION! • When installing the integrated power module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the integrated power module and possibly result in an electrical system failure.
Cavity Car- tridge Fuse Mini- Fuse Description 9 ——— 10 30 Amp Pink — W indshield W iper 1 1 30 Amp Pink — Anti-Lock Brake System (ABS) V alves – If Equipped 12 40 Amp Green — Radiator F.
Rear Power Distribution Center There is also a power distribution center located in the trunk under the spar e tire access panel. This center contains fuses and relays.
CAUTION! • When installing the power distribution center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
Cavity Car- tridge Fuse Mini- Fuse Description 5 30 Amp Pink — Heated Seats – If Equipped 6 — 20 Amp Y ellow Fuel Pump 7 ——— 8 — 15 Amp Blue Diagnostic Link Connec- tor (DLC)/W ireless C.
Cavity Car- tridge Fuse Mini- Fuse Description 2 2——— 2 3——— 2 4——— 2 5——— 2 6——— 27 — 10 Amp Red Occupant Restraint Con- troller (ORC) 28 — 10 Amp Red Ignition Run, .
Cavity Car- tridge Fuse Mini- Fuse Description 38 — 10 Amp Red Cargo Light/Satellite Receiver (SDARS) V ideo – If Equipped/V ehicle Information Module – If Equipped 39 — 10 Amp Red Heated Mirr.
VEHICLE STORAGE If you are leaving your vehicle dormant for mor e than 21 days, you may want to take these steps to protect your battery . • Disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep it out of service (i.
Exterior Bulb Number Low Beam Headlamp (Standard Halogen) ...... 9006 Low Beam Headlamp – High Intensity Discharge (HID) ......................... D 1 S (Serviced at Authorized Dealer) High Beam Headlamp .................... 9005 Front Park/T urn Lamp .
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 3. Disconnect the bulb fr om the socket assembly and install the replacement bulb.
3 — Park/T urn Lamp Bulb 4 — Side Marker Lamp Bulb 414 MAINT AINING YOUR VEHICLE.
Low Beam Headlamp, High Beam Headlamp, and Park/T urn Lamp — Models with High Intensity Discharge Headlamps (HID) HID Headlamps The headlamps are a type of high voltage dischar ge tube. High voltage can remain in the cir cuit even with the headlamp switch off and the key r emoved.
2. Remove two fasteners from the back of the taillamp assembly . 3. Pull back the trunk liner . 4. Remove the remaining fastener from the back of the taillamp assembly . 5. Push the electrical connector locking tab to the side. 6. Disconnect the electrical connector .
7. Pull the taillamp assembly clear from the vehicle to access the bulbs. 8. T urn the appropriate bulb and socket assembly coun- terclockwise to r emove it from the taillamp assembly .
9. Disconnect the bulb fr om the socket assembly and install the replacement bulb. 10. Reinstall the bulb and socket assembly into the taillamp assembly , and then turn it clockwise.
1 1. Reinstall the taillamp assembly , fasteners, electrical connector , and trunk liner . 12. Close the trunk. License Lamp 1. Remove the screws securing the lamp to the rear fascia. 2. Remove the bulb and socket assembly . 3. Disconnect the bulb fr om the socket assembly and install the replacement bulb.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 2.7 Liter Engine 18 Gallons 68 Liters 3.5 Liter Engine without All Wheel Drive 18 Gallons 68 Liters 3.5 Liter Engine with All Wheel Drive 19 Gallons 72 Liters 5.7 Liter Engine 19 Gallons 72 Liters Engine Oil with Filter 2.
U.S. Metric Cooling System * 2.7 Liter Engine (MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula or equivalent) 9.9 Quarts 9.4 Liters 3.5 Liter Engine without All Wheel Drive (MOP AR 威 Antifreeze/ Coolant 5 Y ear/100,000 Mile Formula or equivalent) 1 1.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent.
Component Fluid, Lubricant, or Genuine Part Engine Oil Filter MOP AR 威 Engine Oil Filter or equivalent. Spark Plugs – 2.7L Engine TE10MCC5 (Gap 0.050 in [1.27 mm]) Spark Plugs – 3.5L Engine ZFR5LP–13G (Gap 0.050 in [1.27 mm]) Spark Plugs – 5.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Brake Master Cylinder MOP AR 威 DOT 3 and SAE J1703 should be used or equivalent.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 2 6 䡵 Maintenance Schedule .................. 4 2 6 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
• Check the fluid levels of the coolant reservoir , brake master cylinder , and power steering, add as needed. • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid.
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (5.7L Engine). ❏ Inspect the transfer case fluid — All Wheel Drive (A WD).
42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid.
60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (5.7L Engine). ❏ Replace the air conditioning filter (if equipped) ❏ Inspect the brake linings; replace if necessary .
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (5.7L Engine). ❏ Inspect and replace PCV valve if necessary .
96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the air conditioning filter (if equipped) ❏ Replace the spark plugs (5.
126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid.
138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
† This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 4 7 ▫ Prepar e For The Appointment ........... 4 4 7 ▫ Prepar e A List ...................... 4 4 7 ▫ Be Reasonable W ith Requests .
䡵 Publication Order Forms ................ 4 5 1 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 5 3 ▫ T readwear ......................... 4 5 3 ▫ T raction Grades ..................... 4 5 3 ▫ T emperature Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or r elated concerns.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
About Y our Brakes ....................... 2 7 7 ABS (Anti-Lock Brake System) .............. 2 8 0 Adding Engine Coolant (Antifreeze) .......... 3 9 0 Adding Fuel ........................... 3 2 3 Adding W asher Fluid ..................... 3 8 4 Additives, Fuel .
Auto Unlock, Doors ....................... 3 0 Auto Up Power W indows .................. 3 6 Automatic Dimming Mirror ................. 8 4 Automatic Door Locks ................... 29,30 Automatic Headlights .................... 1 3 0 Automatic Oil Change Indicator .
Fluid Check ....................... 394,424 Master Cylinder ....................... 3 9 4 Parking ............................. 2 7 7 W arning Light ........................ 1 7 5 Brakes ............................... 3 9 3 Brake/T ransmission Interlock .
Clock ........................ 196,197,201,210 Coin Holder ........................... 1 5 7 Compact Disc (CD) Maintenance ............. 2 3 6 Compact Spare T ire ...................... 2 9 9 Compass .............................. 1 8 9 Compass Calibration .
Deck Lid, Power Release ................... 3 7 Defroster , Rear W indow ................... 1 5 9 Defroster , W indshield ................ 77,239,244 Delay (Intermittent) W ipers ................. 1 3 6 Diagnostic System, Onboard ................ 3 7 0 Dimmer Switch, Headlight .
Emergency , In Case of Freeing V ehicle When Stuck ............... 3 6 1 Hazard W arning Flasher ................. 3 4 4 Jacking ............................. 3 4 5 Jump Starting ......................... 3 5 7 Overheating .......................... 3 4 4 T owing .
Exterior Folding Mirrors ................... 8 5 Exterior Lighting ........................ 1 3 0 Exterior Lights .......................... 7 7 Filler Location Fuel ...................... 3 2 3 Filters Air Cleaner .......................... 3 7 8 Air Conditioning .
Filler Cap (Gas Cap) .................... 3 2 3 Gasoline ............................ 3 1 8 Gauge .............................. 1 6 7 Materials Added ....................... 3 2 1 Methanol ............................ 3 1 9 Octane Rating ............
Hazard W arning Flasher ................... 3 4 4 Head Restraints ......................... 1 2 4 Headlight W ashers ....................... 3 8 4 Headlights ............................ 4 1 5 Automatic ........................... 1 3 0 Bulb Replacement .
Interior Appearance Care .................. 4 0 0 Interior Fuses .......................... 4 0 3 Interior Lights .......................... 1 3 4 Intermittent W ipers (Delay W ipers) ........... 1 3 6 Introduction ............................. 4 Jack Location .
Bulb Replacement ................... 4 1 1,412 Courtesy/Reading ................... 134,143 Cruise .............................. 1 6 7 Daytime Running ...................... 1 3 2 Dimmer Switch, Headlight ............. 132,133 Electronic Stability Pr ogram (ESP) Indicator .
T urn Signal ................... 77,132,133,169 V anity Mirror .......................... 8 6 V oltage ............................. 1 6 8 W arning (Instrument Cluster Description) ..... 1 6 7 Load Leveling System .................... 1 6 0 Loading V ehicle .
V anity ............................... 8 6 Mode Fuel Saver ........................... 1 8 4 Modifications/Alterations, V ehicle ............. 7 Monitor , T ire Pressur e System ............... 3 0 8 Mopar Parts ......................... 372,450 MTBE/ETBE .
Outside Rearview Mirrors .................. 8 4 Overdrive ............................. 2 6 2 Overhead Console ....................... 1 4 2 Overheating, Engine ................... 169,344 Owner’s Manual (Operator Manual) ......... 4,451 Paint Care .
Radio Remote Controls .................... 2 3 5 Radio, Satellite (Uconnect 威 studios) ........... 2 2 7 Rear Cupholder ......................... 1 5 6 Rear Seat, Folding ....................... 1 2 7 Rear W indow Defroster ................... 1 5 9 Rear W indow Features .
Satellite Radio Antenna ................... 2 2 8 Satellite Radio (Uconnect 威 studios) ........... 2 2 7 Schedule, Maintenance .................... 4 2 6 Seat Belt Maintenance .................... 4 0 2 Seat Belt Reminder ....................... 4 8 Seat Belts .
Service Manuals ........................ 4 5 1 Setting the Clock ................ 196,197,201,210 Settings, Personal ........................ 1 9 1 Shifting ............................... 2 5 6 Automatic T ransmission ............ 256,260,266 Shoulder Belt Upper Anchorage .
Supplemental Restraint System - Airbag ........ 5 0 Sway Control, T railer ..................... 3 2 9 Synthetic Engine Oil ...................... 3 7 7 System, Remote Starting .................... 2 5 T achometer ............................ 1 6 7 T emperature Control, Automatic (A TC) .
Snow T ires ........................... 3 0 6 Spare T ire ........................... 3 4 6 Spinning ............................ 3 0 1 T railer T owing ........................ 3 3 6 T read W ear Indicators ................... 3 0 2 T o Open Hood ...
T ransmitter Programming (Remote Keyless Entry) .................... 1 9 T ransmitter , Remote Keyless Entry (RKE) ........ 1 9 T ransporting Pets ........................ 7 4 T read W ear Indicators .................... 3 0 2 T rip Odometer .........
W ashers, W indshield ................ 136,137,384 W ashing V ehicle ......................... 3 9 8 W ater Driving Through ...................... 2 7 3 Wheel and Wheel T rim .................... 4 0 0 Wheel and Wheel T rim Care ................ 4 0 0 W ind Buffeting .
Chrysler Group LL C 10D 48 1-126-AB 2nd Edition Printed in U.S.A..
An important point after buying a device Dodge 2010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dodge 2010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dodge 2010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dodge 2010 you will learn all the available features of the product, as well as information on its operation. The information that you get Dodge 2010 will certainly help you make a decision on the purchase.
If you already are a holder of Dodge 2010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dodge 2010.
However, one of the most important roles played by the user manual is to help in solving problems with Dodge 2010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dodge 2010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
