Instruction/ maintenance manual of the product 2009 Dakota Dodge
Go to page of 449
2009 DA KOTA D A KOT A Chrysler LL C 81-326-0934 First Edition Printed in U.S.A. OWNER ’S MANU AL 2009.
VEHICLES SOLD IN CANADA W ith r espect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor . DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS m Introduction ........................... 4 m How T o Use This Manual .................. 4 m W arnings And Cautions ................... 6 m V ehicle Identification Number ............... 6 m V ehicle Modifications/Alterations ..
INTRODUCTION This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Locking Doors W ith The Key ............. 1 5 m Steering Wheel Lock — If Equipped ......... 1 5 ▫ If Y ou W ish T o Manually Lock The Steering Wheel .
m Remote Keyless Entry .................... 2 1 ▫ T o Unlock The Doors ................... 2 2 ▫ T o Lock The Doors .................... 2 2 ▫ Using The Panic Alarm ................. 2 4 ▫ General Information .................... 2 4 ▫ Programming Additional T ransmitters .
▫ Seat Belt Extender ..................... 4 5 ▫ Driver And Right Front Passenger Supplemental Restraint System (SRS) – Airbags ............................. 4 6 ▫ Event Data Recorder (EDR) .............. 5 6 ▫ Child Restraint ..............
A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your authorized dealer . Ask your authorized dealer for these numbers and keep them in a safe place.
NOTE: If you try to remove the key befor e you place the shift lever in P ARK, the key may become temporarily trapped in the ignition cylinder . If this occurs, rotate the key to the right slightly , then remove the key as de- scribed.
CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual T ransmission — If Equipped When the steering wheel is in the LOCK position, the steering and ignition systems are locked to pr ovide antitheft protection for your vehicle.
Locking Doors With The Key Y ou can insert the key into the door lock cylinder with either side up. T o lock the driver’s door , turn the key rearwar d. T o unlock the driver’s door , turn the key forward. For external door lock lubrication, r efer to “Body Lubrication” in Section 7.
SENTR Y KEY T IMMOBILIZER SYSTEM — IF EQUIPPED The Sentry Key t prevents unauthorized vehicle opera- tion by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regar dless of whether the vehicle is locked or unlocked.
the same key chain will not cause a key-related (transponder) fault unless the additional part is physi- cally held against the ignition key being used when starting the vehicle. Cell phones, pagers, or other RF electronics will not cause interfer ence with this system.
2. Insert the first valid key into the ignition switch. T urn the ignition switch to the ON position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key . 3. Insert the second valid key into the ignition switch.
VEHICLE SECURITY ALARM SYSTEM — IF EQUIPPED The V ehicle Security Alarm system monitors the vehicle doors and ignition for unauthorized operation. When the V ehicle Security Alarm system is activated it will pr ovide both audible and visible signals.
exit alarming mode, press the RKE transmitter UNLOCK button or start the vehicle with a programmed Sentry Key t . The V ehicle Security Alarm system is designed to pr otect your vehicle; however , you can create conditions wher e the system will arm unexpectedly .
REMOTE KEYLESS ENTR Y This system allows you to lock or unlock the doors or activate the Panic Alarm from distances up to a maxi- mum of 66 ft (20 m) using a Remote Keyless Entry (RKE) transmitter . The RKE transmitter does not need to be pointed at the vehicle to activate the system.
T o Unlock The Doors: Press and r elease the UNLOCK button on the RKE transmitter once to unlock only the driver’s door , or twice to unlock all the doors. When the unlock button is pressed, the illuminated entry will initiate, and the parking lights will flash twice.
Horn Chirp Programming The horn chirp feature is shipped fr om the assembly plant activated. If desired, this featur e can be disabled by using the following procedur e: 1. Pr ess and hold the LOCK button on the RKE trans- mitter . 2. After holding the LOCK button for four seconds, also press the P ANIC button within six seconds.
4. T est the Flash Lamps W ith Lock feature while outside of the vehicle by pressing the LOCK button on the RKE transmitter with the ignition in the OFF position and the key removed. NOTE: Pressing the LOCK button on the RKE transmit- ter while you are in the vehicle will activate the V ehicle Security Alarm.
NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. If your RKE T ransmitter fails to operate from a normal distance, check for these two conditions.
6. After holding the UNLOCK button for four seconds, also press the P ANIC button within six seconds. 7. When a single chime is hear d, release both buttons. The chime is an indication that you have successfully entered pr ogram mode. All RKE transmitters that are to be programmed must be done so within 60 seconds of when the chime was heard.
2. Remove and r eplace the battery . When replacing the battery , match the + sign on battery to the + sign on the inside of the battery clip, located on the back cover . A void touching the new battery with your fingers. Skin oils may cause battery deterioration.
Once the vehicle has started, the engine will run for 15 minutes. T o cancel remote start, pr ess the REMOTE ST AR T button once. The parking lights will remain illuminated to indicate that the vehicle has remote started and the engine is running. The lights will turn of f when the ignition is turned to RUN or the remote start is cancelled.
The vehicle can be started remotely up to a maximum of two times. The vehicle is also allowed a maximum of one failed start, where the r emote start sequence was initiated but the engine stopped cranking without starting.
If you press the power door LOCK switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you fr om acciden- tally locking your keys in the vehicle. Removing the key , or closing the door , will allow the locks to operate.
4. W ithin 10 seconds, cycle the key from the LOCK position to the ON position and back to LOCK position, a minimum of four times; ending in the LOCK position. (Do not start the engine.) 5. W ithin 30 seconds, press the driver’s door LOCK switch in the LOCK direction.
5. W ithin 30 seconds, press the driver’s door LOCK switch in the UNLOCK direction. 6. A single chime will sound to indicate the feature has been changed. 7. T o reactivate the featur e, repeat the above Steps. 8. If a chime is not hear d, program mode was canceled before the featur e could be changed.
T o use the system, open each rear door , slide the lever up to engage the locks, and down to disengage the child- protection locks. When the system on a door is engaged, that door can only be opened by using the outside door handle, even if the inside door lock is in the unlocked position.
WINDOWS Power Windows The control on the left fr ont door has up-down switches that give you finger-tip contr ol of all four power win- dows. There is a single opening and closing switch on the passenger doors for passenger window control.
W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle.
windows down or partially open. This is a normal occurrence and can be minimized. If the buf feting occurs with the rear windows open, open the fr ont and rear windows together to minimize the buffeting. OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems.
Research has shown that seat belts save lives, and that they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown fr om the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
W ARNING! (Continued) • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of a collision the best. W earing your belt in the wrong place could make your injuries in a collision much worse.
plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt buckled into the wrong buckle will not protect you properly .
W ARNING! (Continued) • A belt that is worn under your arm is very danger - ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury and a belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job as well.
Adjustable Upper Shoulder Belt Anchorage In the front and second r ow outboard seats, the shoulder belt can be adjusted upward or downwar d to help position the belt away from your neck. Push in on the anchorage release button to r elease the anchorage, and then move it up or down to the position that fits you best.
The adjuster has an easy up (EZ Up) feature, which will allow it to be moved up without engaging the button. Automatic Locking Retractors (ALR) Mode – If Equipped In this mode, the shoulder belt is automatically pre- locked. The belt will still retract to r emove any slack in the shoulder belt.
Seat Belt Pretensioners The seat belts for front outboar d seating positions are equipped with pretensioning devices that ar e designed to remove any slack fr om the seat belt system in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision.
NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or ST AR T position. Chrylser LLC does not recommend deactivating BeltAlert t . 1. T urn the ignition switch to the OFF position and buckle the driver’s seat belt.
W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use the seat belt extender when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity and occupant size. This vehicle may also be equipped with window bags to protect the driver , and front and r ear passengers sitting next to a window .
W ARNING! (Continued) • If your vehicle is equipped with window bags, do not have any accessory items installed that will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require perma- nent attachments (bolts or screws) for installation on the vehicle roof.
If a child between the ages of 1 and 12 years old, must ride in the front passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child r estraint.
W ARNING! (Continued) • If the vehicle has window bags, they also need room to inflate. Do not lean against the door or window . Sit upright in the center of the seat.
position, in the ACC position, or not in the ignition, the airbags are not on and will not inflate. During a moderate-to-severe r ear impact, the ORC may only deploy the seat belt pretensioners.
may be possible based on collision severity and occu- pant size. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the bags inflate to their full size. The bags fully inflate in about 50 - 70 milliseconds.
If a Deployment Occurs The airbag system is designed to deploy the airbags when the impact sensors detect a moderate-to-severe frontal collision, to help r estrain the driver and front passenger , and then immediately deflate. NOTE: A frontal collision that is not sever e enough to need airbag protection will not activate the system.
W ARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, and both front seat belt retractor assemblies (w/ pretensioners), replaced by an authorized dealer as soon as possible.
W ARNING! (Continued) • It is dangerous to try to repair any part of the airbag system yourself. Be sure to tell anyone who works on your vehicle that it has an airbag system. NOTE: Perchlorate Material – special handling may apply . See www .dtsc.
check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good.
court with legal jurisdiction (i.e., pursuant to a warrant). A copy of the data will be provided to the custodial entity upon request. General data, that does not identify par - ticular vehicles or crashes, may be released for incorpo- ration in aggregate crash databases, such as those main- tained by the U.
• Cruise contr ol status • T raction/stability control status • T ire pressur e monitoring system status (if equipped). Child Restraint Everyone in your vehicle needs to be buckled up all the time - babies and children, too.
restraint anchorage system. (Refer to “LA TCH - Child Seat Anchorage System” in this section.) • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a fr ont passenger airbag that does not have a switch to turn the airbag Off.
• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm.
• Carefully follow the instr uctions that come with the restraint. If you install the r estraint improperly , it may not work when you need it. • The Extended Cab first, and Club/Crew Cab second row outside seating positions, have cinching latch plates.
connection to the top tether anchorages have been avail- able for some time. For some older child restraints, many child restraint manufactur ers offer add-on tether strap kits or retr o-fit kits. Y ou are ur ged to take advantage of all the available attachments provided with your child r e- straint in any vehicle.
If your child restraints ar e not LA TCH compatible, you can only install the child restraints using the vehicle’s seat belts. Refer to “Installing the LA TCH-Compatible Child Restraint System” in this section.
were pr ovided with the child restraint system. The r ear seat lower anchorages are r ound bars, located at the rear of the seat cushion where it meets the seatback, and ar e just visible when you lean into the vehicle to install the child restraint.
reach. If the buckled seat belt interfer es with the child restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child.
locking retractor seat belts, r efer to 9 Automatic Locking Mode 9 in this section. If you have trouble tightening the lap/shoulder belt on the child restraint because, the buckle or latch plate is too close to the belt path opening on the restraint, follow these steps.
W ARNING! • W ith a child restraint installed in the rear passen- ger side locations, use care when adjusting the front seat(s) rearward, to avoid the front seatback coming in contact with the belted child directly behind the seat. The child could be injured.
T ether Straps at the Rear Passenger Seat (Extended Cab) 1. Route the child r estraint tether strap through the routing loop, located dir ectly behind the child restraint. The routing loops ar e located behind the flip-down door on the cab back panel (padded bolster).
T ether Straps at the Rear Passenger Seat (Crew Cab) 1. Route the child r estraint tether strap under the head restraint for the outboar d seating positions, and then through the anchor strap outer loop (webbing material loop), located directly behind the child r estraint.
W ARNING! An incorrectly anchored tether strap could lead to seat failure and injury to the child. In a collision, the seat could come loose and allow the child to crash into the inside of the vehicle or other passengers, or even be thrown from the vehicle.
shown under “Engine Oil”, under “Maintenance Proce- dures” in section 7 of this manual. NON-DETERGENT OR STRAIGHT MINERAL OILS MUST NEVER BE USED. A new engine may consume some oil during its first few thousand miles (kilometers) of operation.
compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace or adjust as requir ed. Safety Checks Y ou Should Make Inside The V ehicle Heater Defroster Ducts Inspect the heater defroster ducts for pr oper operation.
Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for tr ead wear or uneven wear patterns. Check for stones, nails, glass or other objects lodged in the tread. Inspect for tread cuts or sidewall cracks. Check wheel nuts for tightness and tires for pr oper pressur e.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors .............................. 8 0 ▫ Inside Day/Night Mirror ................ 8 0 ▫ Outside Mirrors ....................... 8 0 ▫ Outside Mirrors Folding Featur e — If Equipped ..
m Seats ............................... 1 1 5 ▫ Manual Seat Adjustment ............... 1 1 5 ▫ Front Seats Manual Seat Recliners ......... 1 1 6 ▫ Manual Lumbar Support Adjustment — If Equipped .......................... 1 1 7 ▫ Adjustable Head Restraints — Front Seating Positions .
m T ilt Steering Column ................... 1 3 1 m Electronic Speed Contr ol — If Equipped ...... 1 3 2 ▫ T o Activate ......................... 1 3 3 ▫ T o Set At A Desir ed Speed .............. 1 3 3 ▫ T o Deactivate .......................
m Garage Door Opener — If Equipped ........ 1 4 2 ▫ Programming HomeLink t .............. 1 4 4 ▫ Gate Operator/Canadian Programming ..... 1 4 6 ▫ Using HomeLink t .................... 1 4 7 ▫ Reprogramming A Single HomeLink t Button .......
m T ailgate ............................. 1 5 8 ▫ T ailgate Removal ..................... 1 5 8 ▫ T wo–Position T ailgate/Upper Load Platform ...
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror . The mirror should be adjusted to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle).
Power Mirrors The power mirror contr ols are located on the driver’s door trim panel. T o adjust a mirror , turn the control wand toward the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirr or to move.
W ARNING! V ehicles and other objects seen in the right-side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the right-side mirror .
• or call 1–877–855–8400 UConnect t allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The UConnect t system is driven through your Bluetooth t “Hands-Free pr ofile” cellular phone.
The UConnect t system is fully integrated with the vehi- cle’s audio system. The volume of the UConnect t system can be adjusted either from the radio volume contr ol knob or from the steering wheel radio contr ol (right switch), if so equipped.
Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say 9 Help 9 following the beep. The UConnect t system will play all the options at any prompt if you ask for help. T o activate the UConnect t system from idle, simply pr ess the PHONE button and follow the audible prompts for directions.
• For identification purposes, you will be prompted to give the UConnect t system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • Y ou will then be asked to give your cellular phone a priority level between 1 and 7, with 1 being the highest priority .
• The system will prompt you to say the name of the person you want to call. • After the 9 Ready 9 prompt and the following beep, say the name of the person you want to call. For example, you can say 9 John Doe, 9 where John Doe is a pr evi- ously stored name entry in the UConnect t phonebook or downloaded phonebook.
The UConnect t system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations.
• This downloaded phonebook cannot be edited or deleted on the UConnect t . These can only be edited on the mobile phone. The changes are transferr ed and updated to UConnect t on the next phone connection.
• Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook Edit. 9 • Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit.
from the list, pr ess the “V oice Recognition” button while the UConnect t system is playing the desired entry and say 9 Delete. 9 • After you enter the name, the UConnect t system will ask you which designation you wish to delete: home, work, mobile, pager , or all.
• T o call one of the names in the list, press the “V oice Recognition” button during the playing of the desired name, and say 9 Call. 9 NOTE: The user can also exercise 9 Edit 9 or 9 Delete 9 operations at this point. • The UConnect t system will then prompt you as to the number designation you wish to call.
call when another call is in progr ess. Therefor e, the user can only answer an incoming call or ignore it. Making a Second Call While Current Call in Progress T o make a second call while you are cur.
has established, press and hold the PHONE button until you hear a double beep, indicating that the two calls have been joined into one conference call. Call T ermination T o end a call in progr ess, momentarily press the PHONE button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.
• An active call is automatically transferred to the mobile phone after the ignition key is switched to OFF . UConnect T System Features Language Selection T o change the language that the UConnect t system is using: • Press the PHONE button to begin.
the paired cellular phone to call the emer gency num- ber . This feature is supported in the U.S., Canada, and Mexico. NOTE: • The emergency number dialed is based on the country where the vehicle is pur chased (91 1 for the U.S. and Canada and 060 for Mexico).
NOTE: • The T owing Assistance number dialed is based on the country where the vehicle is pur chased (1-800-528- 2069 for the U.S., 1-877-213-4525 for Canada, 55-14- 3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). • If supported, this number may be programmable on some systems.
numbers, followed by 9 Send, 9 is also to be used for navigating through an automated customer service cen- ter menu structur e, and to leave a number on a pager . Y ou can also send stored UConnect t phonebook entries as tones for fast and easy access to voice mail and pager entries.
Phone and Network Status Indicators If available on the radio and/or on a premium display such as the instrument panel cluster , and supported by your cell phone, the UConnect t system will provide notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect t .
• Following the beep, say 9 Mute off. 9 Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect t system allows ongoing calls to be trans- ferred fr om your cellular phone to the UConnect t system without terminating the call.
Select Another Cellular Phone This feature allows you to select and start using another phone paired with the UConnect t system. • Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Setup Select Phone 9 and follow the prompts.
system V oice T raining feature may be used. T o enter this training mode, follow one of the two following proce- dures: From outside the UConnect t mode (e.
• low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, Fr ench, and Spanish ac- cents, the system may not always work for some.
• smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the UConnect t system.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 105 3.
106 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 107 3.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompt.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment.
When you press the VR har d-key , you will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the VR har d-key , listen for the beep, and say your command.
Commands The V oice Recognition System understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pr essing the VR hard-key .
Radio FM T o switch to the FM band say FM or RADIO FM. In this mode, you may say the following commands: • FREQUENCY (to change the fr equency) • NEXT ST A TION (to select the next station) • PR.
Memo T o switch to the voice recor der mode say MEMO. In this mode, you may say the following commands: • NEW MEMO (to recor d a new memo) — During the recor ding you may press the VR har d-key to stop recor ding.
V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, the UConnect t system V oice T raining feature may be used. 1. Pr ess the VR hard-key , speak “System Setup” and once you are in that menu then speak “V oice T raining.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked.
W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
Adjustable Head Restraints — Front Seating Positions Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Pull up or push down on the restraints so that the upper edge is as high as practical, at least to the level of the ears.
Six-W ay Power Seat Adjuster — Driver’s Side Only The power seat controls ar e located on the outboard side of the driver’s seat cushion. Three switches contr ol the seat movement. The four-way switch in the center can be moved forward, backwar d, up, or down to adjust for the most comfortable position.
The seat angle can also be adjusted by using the two toggle switches, tilting it up or down. Extended Cab/Crew Cab T Rear Seat More car go space is available by lifting up on the rear seat cushion. The Crew Cab t Rear Seat is a 60/40 split cushion and full back.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time.
2. Then push the safety latch lever up while lifting the grille with your hand. It is located at the bottom center of the grille. Lift the hood, and the gas filled props will hold it open. T o prevent possible damage, do not slam the hood to close it.
LIGHTS The headlight switch is located on the left side of the instrument panel next to the steering wheel. Interior Lights Courtesy and dome lights are turned on when the fr ont doors are opened, whe.
NOTE: Club Cab t /Quad Cab t models may have an optional switched dome lamp that is operated by press- ing the lens. Battery Saver T o protect the life of your vehicle’s battery , Load Shed- ding is provided for both the interior and exterior lights.
Headlight Delay T o aid in your exit, your vehicle is equipped with a headlight delay that will leave the headlight on for 60 seconds. This delay is initiated when the ignition is turned OFF while the headlight switch is on, and then the headlight switch is cycled off.
Plastic is not as scratch resistant as glass and ther efore differ ent lens cleaning procedur es must be followed. T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove r oad dirt, wash with a mild soap solution fol- lowed by rinsing.
30 seconds when the RKE transmitter UNLOCK button is pressed, as part of the illuminated entry featur e. Multifunction Lever The multifunction lever is located on the left side of the steering column. T urn Signals T o operate the turn signals, move the multifunction lever up to signal a right-hand turn or down to signal a left-hand turn.
The arrow on either side of the instr ument cluster flashes to indicate the direction of the turn, and pr oper operation of the front and r ear turn signal lights. If an indicator fails to light when the multifunction lever is moved, it would suggest that the switch or indicator lamp is defective.
WINDSHIELD WIPERS AND W ASHERS The multifunction lever is located on the left side of the steering column. Windshield Wipers The wipers and washers are operated by a switch in the multifunction lever . T urn the end of the multifunction lever to select the desired wiper speed.
Intermittent W iper System The intermittent feature of this system was designed for use when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. For maximum delay between cycles, rotate the contr ol knob into the upper end of the delay range.
Windshield W ashers T o use the washer , push in on the washer knob on the end of the multifunction lever and hold while spray is desired. If the washer knob is depr essed while in the delay range, the wiper will operate for several seconds after the washer knob is released.
W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving.
T o Activate Push the ON/OFF button to the ON position. In the instrument cluster , the word “CRUISE” illuminates to indicate that the system is on. NOTE: The Electronic Speed Contr ol has been designed to shut down if multiple speed control buttons (i.
T o V ary The Speed Setting When the Electronic Speed Contr ol System is ON, the speed can be increased by pr essing and holding the RESUME/ACCEL button. When the button is released, a new set speed will be established. T apping the ACCEL button once will r esult in a speed increase of 1 mph (2 km/h).
W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions, and you could lose control. An accident could be the result. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy , snow-covered, or slippery .
Courtesy/Reading Lights Near the front of the console ar e two courtesy/reading lights. Both lights illuminate as courtesy lights when a door is opened, when the dimmer control is r otated to the courtesy light position (fully upward position), or when the UNLOCK button is pressed on the Remote Keyless Entry (RKE) transmitter , if so equipped.
US/M Button Use the US/M button to change the display from U.S. to metric measurement units. RESET Button Use the RESET button to reset the following displays: • A verage Fuel Economy • T rip Odometer • Elapsed time.
STEP Button Use the STEP button to choose, or cycle thr ough, the four trip conditions. A verage Fuel Economy (A VG ECO) Displays the average fuel economy since the last reset. A verage fuel economy is a running average of the amount of fuel used and the distance the vehicle has traveled.
point (fuel gauge pointer on the red “E” marker), ther e is reserve fuel capacity , which corresponds to appr oxi- mately 8% of tank volume. This reserve capacity was put in place to prevent the likelihood of customers r unning out of fuel when operating at maximum load conditions in areas wher e there ar en’t many gas stations.
Global Reset If the RESET button is pressed twice within two seconds while in any of the three r esettable displays (A VG ECO, ODO, ET), the GLOBAL RESET will reset all thr ee displays.
NOTE: Magnetic materials should be kept away from the Overhead Console. This is wher e the compass sensor is located. Manual Compass Calibration NOTE: T o ensure pr oper compass calibration, make sure the compass variance is pr operly set before manu- ally calibrating the compass.
T o set the variance: T urn the ignition ON and set the display to “Compass/T emperature.” Pr ess and hold the RESET button approximately five seconds. The last vari- ance zone number will be displayed. Press the STEP button to select the new variance zone and press the RESET button to resume normal operation.
NOTE: HomeLink t is disabled when the V ehicle Theft Alarm is active. W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate.
W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run your vehicle in the garage while training the transceiver . Exhaust gas can cause seri- ous injury or death.
3. Simultaneously , press and hold both the chosen HomeLink t button and the hand-held transmitter button until the indicator(s) change from a slow to a rapid flash rate. Then release both the HomeLink t and hand-held trans- mitter buttons. It may take up to 30 seconds, or longer in rare cases.
6. Firmly pr ess and release the “learn” or “training” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the next step after the “Learn” button has been pressed.
transmission – which may not be long enough for HomeLink t to pick up the signal during programming. Similar to this Canadian law , some U.S. gate operators are designed to “time-out” in the same manner . It may be helpful to unplug the device during the cycling process, to pr event possible overheating of the garage door or gate motor .
1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desir ed HomeLink t button, for 20 seconds, until the indicator(s) starts to flash. Do not release the button. 3. W ithout releasing the button, proceed with PRO- GRAMMING HOMELINK t , Step #2, and follow all remaining steps.
2. This device must accept any interfer ence that may be received including interfer ence that may cause undesired operation NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly appr oved by the party responsible for compli- ance could void the user ’s authority to operate the device.
Electrical Outlet Use With Engine OFF (Battery Fed Configuration) CAUTION! • Many accessories that can be plugged in, draw power from the vehicle’s battery , even when not in use (i.
A two-cavity cupholder is available on all Crew Cabs t , with rear seats mounted on the floor . REAR STORAGE — IF EQUIPPED Rear Convenience Storage Crates The rear convenience storage crates ar e located under the rear seat lower cushion and consist of two r emovable, collapsible storage crates.
W ARNING! Do not sit or stand on this crate. It may collapse causing serious injury . CAUTION! Do not lift up on the “End Flaps” to open the crate, damage to the “End Flaps” may occur . NOTE: The maximum loading capacity for the small crate is 30 lbs (13.
T o install the crate into the base, insert the crate into the inboard slot and push down on the outboar d side of the crate, and snap into place. T o collapse the crate, push the crate end flaps inward to disengage. Push the sides inward and snap into the base.
FLOOR CONSOLE — IF EQUIPPED Floor Console Features The Floor Console between the driver’s and front pas- senger’s seat has the following features: • Miscellaneous storage compartments. • Three cupholders (two r emovable). • iPod/Phone storage bin.
inside of the armrest lid. A tissue holder is also pr ovided on the inside of the armrest lid, which holds a pocket-size soft pack of tissue. REAR CARGO AREA UTILITY RAILS CAUTION! The maximum load pe.
T o remove the cleats fr om the utility rail, remove the end cap by pushing up on the locking tab, located on the bottom of the end cap. Slide the cleat off the end of the rail. REAR WINDOW FEA TURES Rear Window Defroster — If Equipped CAUTION! Use care when washing the inside of the rear window to prevent damage to heating elements.
prior to the time-out. The Rear W indow Defroster will turn off automatically after 15 minutes fr om the first activation, and 10 minutes after the second activation, all within the same ignition cycle. T o prevent excessive battery drain, use the rear defr oster only when the engine is running.
available from your authorized dealer . For safety reasons, follow all instructions on this important document. General Information The Manufacturer’s W arranty does not apply to body modifications and special equipment, such as a camper unit, heaters, stoves, refrigerators, etc.
3. Lift the tailgate of f of the pivot on the passenger side by pulling upward and r earward at the same time. 4. Slide the tailgate to the passenger side while making sure clearance fr om the box and taillight is maintained. T o reinstall the tailgate, do the following: 1.
2. Secur e the tailgate in the partially-open position: 3. Open the tailgate slightly . 4. Snap the tailgate support cable between the cable guide and the tailgate bumper .
T o return the tailgate to the full-open position: 1. Lift up on the tailgate. 2. Remove both cables fr om between the cable guides and the tailgate bumpers, and lower the tailgate. CAUTION! • Care should always be exercised when operating a vehicle with cargo.
.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instruments And Controls ................ 1 6 6 m Instrument Cluster ..................... 1 6 7 m Instrument Cluster Description ............ 1 6 8 m Electronic Digital Clock ................. 1 7 9 ▫ Clock Setting Procedur e .
▫ Operating Instructions — Hands-Fr ee Communication (UConnect t )— If Equipped ......................... 1 9 6 ▫ Clock Setting Procedur e ................ 1 9 6 m Sales Code RES — AM/FM Stereo Radio W ith CD Player (MP3 AUX Jack) ..........
▫ Operating Instructions — Satellite Mode .... 2 2 3 ▫ Operating Instructions — Hands-Fr ee Phone (If Equipped) ........................ 2 2 6 ▫ Operating Instructions — V ideo Entertainment System (VES)™ (If Equipped) ..................
INSTRUMENTS AND CONTROLS 1 - Headlight Switch 6 - Glove Compartment 1 1 - T ransfer Case Switch* 2 - Air Outlets 7 - Radio 12 - Speed Control Switches 3 - Demister Outlets 8 - Climate Controls 13 - Ho.
INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 167 4.
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gauge The fuel gauge shows the level of fuel in the fuel tank when ignition switch is in the ON position. 2. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily .
5. High Beam Indicator The high beam indicator will illuminate if the headlights are on high beam. 6. Seat Belt Reminder Light The seat belt reminder light will illuminate for several seconds after the ignition is turned ON as a reminder to “buckle up.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual.
is not functioning and that service is requir ed. However , the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restor e the benefits of Anti-Lock brakes.
CHAngE OIL and the outside temperature on vehicles that are not equipped with the Over head Console with Compass/T emperature Mini-T rip Computer . If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, “GASCAP” will be displayed in the instrument cluster .
16. Odometer The odometer shows the total distance the vehicle has been driven. U.S. federal regulations r equire that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven.
20. Brake System W arning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low , or that there is a pr oblem with the anti-lock brake system reservoir .
W ARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. Y ou could have an accident. Have the vehicle checked immediately . V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD).
If this light comes on and remains on while driving, it suggests a potential engine control pr oblem and the need for system service. Although your vehicle will usually be drivable and not need towing, see an authorized dealer for service as soon as possible.
overheat and can lead to tir e failure. Under -inflation also reduces fuel ef ficiency and tire tr ead life, and may affect the vehicle’s handling and stopping ability .
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
27. Car go Light The Cargo Light indicator will illuminate when the Car go Light is activated by pressing the CARGO LIGHT button, located on the headlight switch. 28. TOW/HAUL The TOW/HAUL button is located at the end of the gear shift lever . This light will illuminate when the TOW/ HAUL button has been selected.
3. After the hours ar e adjusted, push the TUNE/AUDIO control knob to set the minutes. 4. Adjust the minutes by turning the TUNE/AUDIO control knob. 5.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping.
Phone Button (UConnect t Hands-Free Phone) — If Equipped Press this button to operate the Hands-Fr ee Phone (UConnect t ) feature (if equipped). Refer to “Hands-Fr ee Communication (UConnect t )” in Section 3.
R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in AM, FM or Satellite (if equipped) frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the fr equency .
or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information.
Program T ype 16-Digit Character Display T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode.
• Audio Stream – Repeatedly pr essing SELECT will switch to differ ent audio languages (if supported on the disc) (if equipped). • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). NOTE: • The available selections for each of the above entries varies depending upon the disc.
Enter the four-digit country code using the TUNE/ SCROLL control knob to scr oll up and down to select the number and then push to select. Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are ef fective only if the disc supports the customer-pr eferred settings.
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc.
Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show 9 EJECTING DISC 9 when the disc is being ejected and prompt the user to r emove the disc.
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file r ecording media and formats are limited. When writing MP3/WMA files, pay attention to the following restrictions.
If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.
Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
Press and hold the INFO button again for thr ee seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows th.
Operating Instructions — V oice Recognition System (VR) (If Equipped) For the radio, refer to “V oice Recognition System (VR)” in Section 3. For UConnect t “V oice Recognition System (VR),” refer to “Hands-Free Communication (UConnect t )” in Section 3.
AM/FM/CD/DVD MUL TIMEDIA SYSTEM RADIO (RER/REN) – IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN and RER Multimedia systems contain a radio, CD/DVD player , USB port, a 20-gigabyte hard drive (HDD), and a “JukeBox” (virtual CD changer).
3. T o move the hour forward, touch the scr een where the word “Hour” with the arr ow pointing upward is dis- played. T o move the hour backward, touch the scr een where the wor d “Hour” with the arrow pointing down- ward is displayed.
T ouch the screen wher e the words “Show T ime if Radio is Off” ar e displayed to change the current setting. Changing the T ime Zone 1. T urn on the multimedia system. 2. T ouch the screen wher e the time is displayed. The clock setting menu will appear on the screen.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the On/V olume control knob to turn on the radio. Push the On/V olume control knob a second time to turn off the radio.
4. Adjust the minutes using the right side T une/Scroll control knob. Pr ess the T une/Scroll control knob to save time change. 5. T o exit, press any button/knob, or wait five seconds.
Push the rotary T une/Scr oll control knob a fourth time and BALANCE will display . T urn the T une/Scroll control knob to the right or left to adjust the sound level from the right or left side speakers. Push the rotary T une/Scr oll control knob a fifth time and F ADE will display .
Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC Button Pressing the DISC button will allow you to switch fr om AM/FM modes to Disc modes.
CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player .
R W/FF Press the R W button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased, or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner .
The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders.
rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rate. MPEG Specifi- cation Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the On/V olume control knob to turn on the radio. Push the On/V olume control knob a second time to turn off the radio.
V oice Recognition System (Radio) — If Equipped Refer to “V oice Recognition System (VR)” in Section 3. V oice Recognition Button (UConnect t Hands-Free Phone) — If Equipped Press this button to operate the Hands-Fr ee Phone (UConnect t ) feature (if equipped).
4. Adjust the minutes using the right side T une/Scroll control knob. Pr ess the T une/Scroll control knob to save time change. 5. T o exit, press any button/knob or wait five seconds.
Push the rotary T une/Scr oll control knob a third time and TREBLE will display . T urn the T une/Scroll control knob to the right or left to increase or decr ease the treble tones. Push the rotary T une/Scr oll control knob a fourth time and BALANCE will display .
Program T ype 16-Digit Character Display News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Roc.
T une/Scroll contr ol knob to adjust the minutes. Press the T une/Scroll contr ol knob again to save changes. AM/FM Button Press the button to select either AM or FM mode. SET/RND Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button.
Operation Instructions — CD MODE for CD and MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (C.
EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF .
SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track.
exceeding 20 folders will result in this display . W ith 200 files, exceeding 50 folders will result in this display .) • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator 9 . 9 and a three- character extension) • Level 2: 31 (including a separator 9 .
MPEG Specification Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags.
playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
Operating Instructions - Hands-Free Phone (UConnect t ) (If Equipped) Refer to “Hands-Free Communication (UConnect t )” in Section 3. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section.
Switch Position Light Operation 1 Pulse (right/passenger side) position – In this position the sound is active and the lights will pulse with the music. 2 Pulse off/light of f (center) position – In this position the sound is active but the lights will be turned off.
1. The Electr onic Serial Number/Sirius Identification Number (ESN/SID). 2. Y our V ehicle Identification Number . T o access the ESN/SID, refer to the following steps: ESN/SID Access W ith REQ/RES Ra.
as possible, within the loading design of the rack. Do not place items directly on or above the antenna. Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle.
additional three seconds will make the radio display the Song T itle all of the time (press and hold again to return to normal display). INFO Button — REU Radio Pressing the INFO button will display information about Artist, Song T itle, and Composer (if available).
Pressing the MUSIC TYPE button again will close the MUSIC TYPE screen. Once closed, seek up, seek down, and scan will no longer be based on your selection. SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number .
Operating Instructions — Hands-Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect t )” in Section 3. Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.
The left hand control is a r ocker type switch with a push button in the center . The function of the left hand control is differ ent depending on which mode you are in.
3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzine, thinner , cleaners, or antistatic sprays. 5. Stor e the disc in its case after playing. 6. Do not expose the disc to dir ect sunlight. 7. Do not stor e the disc where temperatures may become too high.
Air Conditioning And Heater Air Conditioning And Heater Operation T o turn on the air conditioning, set the fan control at any speed and press the SNOWFLAKE button located at the right of the control panel. Conditioned air will be di- rected thr ough the outlets selected by the mode control.
Recirculation Modes (Panel or Bi-Level ) Select the recir culation modes when the outside air contains dust, odors, high humidity , or if rapid cooling is desired.
Blower Control The rotary knob on the left of the control panel is the Blower Control. T urn the knob clockwise to one of the four positions to obtain the blower speed you desire.
Side window demisters direct airflow specifically to the window glass to help prevent interior fogging of the glass. They are located in the extr eme outside upper edges of the instrument panel. The demisters also pr o- vide extra air ducts for circulation.
As the temperature gets colder it may be necessary to direct air onto the windshield by using MIX Mode position on the control. Adjust the temperature control and blower speed to maintain comfort. High blower speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the defrost mode.
Operation Tips Chart 234 UNDERST ANDING YOUR INSTRUMENT P ANEL.
ST ARTING AND OPERA TING CONTENTS m Starting Procedur es .................... 2 3 9 ▫ Manual T ransmission .................. 2 3 9 ▫ Automatic T ransmission ................ 2 3 9 ▫ Normal Starting ..................... 2 4 0 ▫ Extreme Cold W eather (Below –20°F Or –29°C) .
▫ NV233/243 GII T ransfer Case Operating Information/Precautions ................ 2 5 1 ▫ Shifting Procedur e - NV233/243 T ransfer Case .............................. 2 5 5 ▫ NV 244 Generation II T ransfer Case Operating Information / Precautions .
▫ T ire Pressur es For High Speed Operation .... 2 8 2 ▫ Radial Ply T ires ...................... 2 8 3 ▫ Compact Spare T ire — If Equipped ........ 2 8 4 ▫ Limited-Use Spare — If Equipped ......... 2 8 4 ▫ T ire Spinning ...............
m Flexible Fuel (4.7L Engine Only) — If Equipped . . 302 ▫ E-85 General Information ............... 3 0 2 ▫ Ethanol Fuel (E-85) ................... 3 0 4 ▫ Fuel Requir ements .................... 3 0 4 ▫ Selection Of Engine Oil For Flexible Fuel V ehicles (E-85) And Gasoline V ehicles .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat buildup may cause serious injury or death.
Normal Starting NOTE: Normal starting of either a warm or cold engine is obtained without pumping or depressing the accelera- tor pedal. T urn the ignition switch to the ST AR T position and release when the engine starts.
If the engine fails to start after you have followed the normal starting procedur e, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel, in case the engine is flooded.
W ARNING! Remember to disconnect the cord before driving. Damage to the 1 10-1 15 V olt electrical cord could cause electrocution. MANUAL TRANSMISSION W ARNING! Y ou or others could be injured if you leave the vehicle unattended without having the parking brake fully applied.
Shifting Fully depress the clutch pedal befor e shifting gears. As you release the clutch pedal, lightly depr ess the accelera- tor pedal. Y ou should always use 1st gear when starting from a standing position.
Downshifting Moving from a high gear down to a lower gear is recommended to pr eserve brakes when driving down steep hills. In addition, downshifting at the right time provides better acceleration when you desir e to resume speed. Downshift progr essively .
Gear Selec- tion 6t o5 5t o4 4t o3 3t o2 2t o1 Maxi- mum Speed 85 mph (135 km/h) 75 mph (120 km/h) 55 mph (88 km/h) 35 mph (56 km/h) 20 mph (32 km/h) Reverse Shifting T o shift into REVERSE, bring the vehicle to a complete stop. Depress the clutch and pause briefly to allow the gear train to stop rotating.
CAUTION! (Continued) • Before shifting into any gear , make sure your foot is firmly on the brake pedal. W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse.
the parking brake when leaving the vehicle in this range. Always apply the parking brake first, then place the shift lever into the P ARK position. W ARNING! • Never use P ARK position on an automatic trans- mission as a substitute for the parking brake.
1 (First) For driving up very steep hills and for engine braking at low speeds, 25 mph (40 km/h) or less, when going down hill, use 1st gear . T o prevent excessive engine speed do not exceed 25 mph (40 km/h) in this range.
If the transmission temperature gets extr emely hot, the transmission will automatically select the most desirable gear for operation at this temperature. If the transmission temperature becomes hot enough, the “T rans T emp” light may illuminate and the transmission may downshift out of Overdrive until the transmission cools down.
operating in TOW/HAUL mode, 5th gear (if equipped) is disabled and 2-3 and 3-4 shift patterns are modified. Shifts into Overdrive (4th gear) ar e allowed during steady cruise (for impr oved fuel economy), and auto- matic closed-throttle downshifts to 3r d gear (for im- proved braking) will occur during steady braking.
cause damage to the transmission. The torque converter will refill within five seconds of shifting fr om P ARK into any other gear position. FOUR-WHEEL DRIVE OPERA TION NV233/243 GII T ransfer Case Op.
T ransfer Case Position Indicator Lights T ransfer case position indicator lights are located on the instrument cluster . If there is no indicator light on or flashing, the transfer case position is in two-wheel drive (2WD). If the indicator light is on, the desired position (4WD LOCK and 4WD LOW) has been obtained.
When operating your vehicle in 4WD LOW , the engine speed is approximately thr ee times that of the 2WD or 4WD LOCK positions at a given road speed. T ake care not to overspeed the engine and do not exceed 25 mph (40 km/h). Proper operation of 4-wheel drive vehicles depends on tires of equal size, type and cir cumference on each wheel.
For additional information on the appropriate use of each transfer case mode position, refer to the following infor - mation: 2WD The 2–Wheel Drive (Rear-Wheel Drive) High Range is used for normal street and highway driving, on dry , hard-surfaced r oads.
Shifting Procedure - NV233/243 T ransfer Case NOTE: If any of the requir ements to select a new transfer case position have not been met, the transfer case will not shift, the indicator light for the .
will remain ON. At this time, r educe speed and stop spinning the wheels to complete the shift. There may be a delay up to 10 seconds for the shift to complete after the wheels have stopped spinning. 4WD LOCK-to-4WD LOW or 4WD LOW -to-4WD LOCK NOTE: When shifting into or out of 4WD LOW , some gear noise may be heard.
4. After the desir ed position indicator light is ON (not flashing), shift transmission back into gear (release clutch on manual transmissions). NOTE: If steps 1 or 2, of either the Preferr ed or Alte.
roads. This featur e provides the safety , security , and convenience of operating in all-wheel drive at all times regar dless of road conditions. When additional traction is requir ed, the 4WD LOCK a.
W ARNING! Always engage the parking brake when powering down the vehicle if the ( SVC 4WD ( light is illumi- nated. Not engaging the parking brake may allow the vehicle to roll, which may cause personal injury . NOTE: Do not attempt to make a shift while only the front or r ear wheels are spinning.
For additional information on the appropriate use of each transfer case mode position, refer to the following infor - mation: 4WD The 4-Wheel Drive High Range employs the inter-axle differ ential. This range allows front and r ear wheels to rotate at dif ferent speeds on all r oad surfaces.
Shifting Procedure - NV 244 Generation II T ransfer Case NOTE: The 4x4 system will not allow shifts between 4WD/4WD LOCK if the rear wheels ar e spinning (no traction). In this situation, a position indicator light will flash and the original position indicator light will remain on.
3. While still r olling, rotate the transfer case control switch to the desired position. 4. After the position indicator light has stopped flashing, shift the transmission back into gear . Alternate Procedure 1. Bring the vehicle to a complete stop. 2.
W ARNING! On vehicles equipped with a limited-slip differen- tial, never run the engine with one rear wheel off the ground. The vehicle may drive through the rear wheel remaining on the ground and cause you to lose control of the vehicle. Care should be taken to avoid sudden accelerations when both rear wheels ar e on a slippery surface.
DRIVING THROUGH W A TER Driving through water mor e than a few inches/ centimeters deep will requir e extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising W ater W ARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off).
CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission/transaxle, axle, etc.) for signs of con- tamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water .
POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle.
apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized dealer . W ARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading.
Be sure the parking brake is firmly set when parked and the shift lever is in the P ARK position (automatic trans- mission), or REVERSE, or 1st gear (manual transmission).
When parking on a hill, turn the front wheels towar d the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should be applied whenever the driver is not in the vehicle.
W ARNING! Both Anti-Lock Brake Systems contain sophisticated electronic equipment. It may be susceptible to inter- ference caused by improperly installed or high out- put radio transmitting equipment. This interference can cause possible loss of anti-lock braking capabil- ity .
W ARNING! • Anti-Lock Brake Systems (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. design standards, and it begins with the tir e diameter molded into the sidewall.
EXAMPLE: 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side B-Pillar .
3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and car go being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
ST ARTING AND OPERA TING 279 5.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.
loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous.
Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tires. It is engineer ed to be used on your style vehicle only . Since this tire has limited tread life, the original tire should be r epaired (or r eplaced) and rein- stalled at the first opportunity .
vehicle, but it is not. Installation of this limited-use spare tire af fects vehicle handling. Since it is not the same tire, replace (or r epair) the original tire and r einstall on the vehicle at the first opportunity . W ARNING! The limited-use spare tires are for emergency use only .
T read Wear Indicators T read wear indicators ar e in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm).
W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death.
W ARNING! • DO NOT use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
T ires may also cause the vehicle to pull to the left or right. Alignment will not correct this condition. See your authorized dealer for proper diagnosis. Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance.
CAUTION! (Continued) • Because of limited chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Bro- ken chains can cause serious vehicle damage. Stop the vehicle immediately if noise occurs that could suggest chain breakage.
CAUTION! • Do not use tire chains on vehicles equipped with tires other than P245/70R16. There may not be adequate clearance for the chains and you are risking structural or body damage to your vehicle. • Do not use tire chains on the front wheels of your vehicle.
Follow the recommended tir e rotation fr equency for your type of driving found in the “Maintenance Schedules” section of this manual. More fr equent rotation is permis- sible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being per- formed.
TPMS will warn the driver of a low tire pr essure if the tir e pressur e falls below the low pressur e warning threshold for any reason, including low temperatur e effects, or natural pressur e loss through the tir e.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style.
• Seasonal temperature changes will af fect tire pr essure, and the TPMS will monitor the actual tire pr essure in the tire. Base System – If Equipped The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels.
fault condition no longer exists. A system fault can occur by any of the following scenarios: 1) Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as .
General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed operation.
Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at high speeds can cause damage and immediate service is requir ed. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations.
CAUTION! DO NOT use gasoline containing Methanol or E85 Ethanol. Use of these blends may result in starting and drivability problems and may damage critical fuel system components. Problems that r esult from using methanol/gasoline or E85 Ethanol blends are not the r esponsibility of the manufacturer .
MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles.
CAUTION! (Continued) • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service.
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
manual for information on features that ar e common between Flexible Fuel and gasoline-only powered ve- hicles. CAUTION! Only vehicles with the E-85 fuel filler cap (gas cap) can operate on E-85.
ETHANOL FUEL (E-85) E-85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
Selection Of Engine Oil For Flexible Fuel V ehicles (E-85) and Gasoline V ehicles FFV vehicles operated on E-85 requir e specially formu- lated engine oils. These special requir ements are included in MOP AR t engine oils, and in equivalent oils meeting Chrysler Specification MS-6395.
CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle. ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door . When fueling, the cap may be placed on the inside of the filler door .
CAUTION! Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system. W ARNING! • Never allow any lit smoking materials near the vehicle while removing the cap or filling the tank.
VEHICLE LOADING Certification Label As requir ed by National Highway T raffic Safety Admin- istration Regulations, your vehicle has a certification label affixed to the driver’s side door .
Gross Axle W eight Rating (GA WR) The GA WR is the maximum permissible load on the front and rear axles. The load must be distributed in the car go area so that the GA WR of each axle is not exceeded. Each axle GA WR is determined by the component in the system with the lowest load carrying capacity (axle, springs, tires, or wheels).
should then be determined separately to be sure that the load is properly distributed over fr ont and rear axle. W eighing the vehicle may show that the GA WR of either the front or r ear axles has been exceeded but the total load is within the specified GVWR.
Common T owing Definitions The following trailer towing related definitions will assist you in understanding the following information: Gross V ehicle W eight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, cargo and tongue weight.
T railer T ongue W eight (TW) The TW is the downward for ce exerted on the hitch ball by the trailer is the tongue weight. In most cases it should not be less than 10% or more than 15% of the trailer load. Y ou must consider this as part of the load on your vehicle.
W ARNING! An improperly adjusted weight-distributing hitch may reduce handling, stability , and braking perfor- mance, and could result in an accident. W eight-Distributing Systems may not be compatible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable recreational vehicle dealer for additional information.
EXAMPLE — W ith W eight-Distributing Hitch (Correct) EXAMPLE — Improper Adjustment of W eight- Distributing Hitch (Incorrect) 314 ST ARTING AND OPERA TING.
T railer Hitch Classification The rear bumper is intended to tow trailers up to 2,000 lbs (907 kg) without added equipment or alter- ations to the standard equipment. Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package.
T railer T owing Weights (Maximum T railer Weight Ratings) NOTE: For additional trailer towing information (maxi- mum trailer weight ratings) refer to the following website addresses: • http:// www .
• The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle.
W ARNING! (Continued) Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou could lose control of your vehicle and have an accident.
4. T ongue weight rating for the trailer hitch utilized (This requir ement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight.) T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tir e.
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances.
4-Pin Connector 1 — Female Pins 4 — Park 2 — Male Pin 5 — Left Stop/T urn 3 — Ground 6 — Right Stop/T urn 7-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 — Left Stop/T ur.
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in 1st gear to avoid excessive clutch slippage.
− When using the speed control, if you experience speed drops gr eater than 10 mph (16 km/h), disengage until you can resume cr uising speed. − Use speed control in flat terrain and with light loads to maximize fuel efficiency .
RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) 2WD Models Recreational towing of 2WD models is not allowable. T owing the vehicle with the transmission in NEUTRAL can cause severe transmission damage. Removal of the driveshaft for towing is not recommended, since this would allow fluid to drain from the transmission.
Recreational T owing Procedure Use the following procedur e to prepar e your vehicle for recr eational towing. CAUTION! It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL before recre- ational towing to prevent damage to internal parts.
9. Shift automatic transmission into REVERSE. 10. Release brake pedal for five seconds and ensur e that there is no vehicle movement. 1 1. Repeat steps 9 and 10 with the transmission in DRIVE. 12. Shut engine OFF and place ignition key to the unlocked OFF position.
CAUTION! Damage to the transmission may occur if the trans- mission is shifted into P ARK with the transfer case in NEUTRAL and the engine running. W ith the transfer case in NEUTRAL, ensure that the engine is off prior to shifting the transmission into P ARK.
NOTE: • Steps 1 through 5 ar e requir ements that must be met prior to depressing the NEUTRAL selection button, and must continue to be met until 1 second elapses and the shift has been completed.
CAUTION! • Do not use a bumper mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged. • Do not disconnect the rear driveshaft because fluid will leak from the transfer case and damage internal parts.
.
WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher ................. 3 3 2 m Changing A Flat T ire ................... 3 3 2 ▫ Jack Location ....................... 3 3 2 ▫ Removing The Spare T ire ............... 3 3 4 ▫ T ire Changing Procedur e .
HAZARD W ARNING FLASHER The Hazard W arning Flasher switch is located on the top of the steering column, just behind the steering wheel. Press the switch and all fr ont and rear dir ectional signals will flash intermittently . Press the switch a second time to turn off the emer gency flashers.
The jack is secured in place by turning the jack scr ew until the jack is secured into place. A finger-operated helper tool is provided to assist r e- moval and stowage of the jack. This tool must be removed to operate the jack for changing the spar e tire.
W ARNING! The jack is designed as a tool for changing tires only . The jack should not be used to lift the vehicle for service purposes, unless suitable supports are placed under the vehicle as a safety measure. The vehicle should be jacked on a firm level surface only .
Steps for Removing the Spare T ire • Remove the jack from the stowage compartment using the supplied finger-assist tool. • Remove the finger-assist tool fr om jack and set aside until jack is stowed. • Assemble the jack tools. • Locate the tire carrier access hole on the r ear bumper .
It is recommended that you stow the flat or spar e to avoid tangling the loose cable. NOTE: The winch mechanism is designed for use with the jack extension tube only . Use of an air wrench or other power tools is not recommended and can damage the winch.
Tire Changing Procedure W ARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
6. Block both the front and r ear of the wheel diagonally opposite the jacking position. For example, if the right front wheel is being changed, block the left rear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked.
W ARNING! (Continued) • If working on or near a roadway , be extremely careful of motor traffic. • T o assure that spare tires, flat or inflated are securely stowed, spares must be stowed with the valve stem facing the ground. • T urn on the Hazard warning flasher .
4. When changing a r ear wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle in the positions shown with the drive tubes extending to the rear . Connect the jack tube extension and wheel wrench.
NOTE: Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required. 5. By r otating the wheel wrench clockwise, raise the vehicle until the wheel just clears the surface.
W ARNING! A loose tire or jack thrown forward in a collision or hard stop could injure someone in the vehicle. Al- ways stow the jack, tools and the extra tire and wheel in the places provided. 8. Lower the jack to its fully closed position. Stow the replaced tir e, jack, and tools as previously described.
T o Stow the Flat or Spare T urn the wheel so that the valve stem is down. Slide the wheel retainer thr ough the center of the wheel and position it properly acr oss the wheel opening. For convenience in checking the spare tir e inflation, stow with the valve stem toward the r ear of the vehicle.
If the indicator is dark or shows a green dot, pr oceed as follows: 1. W ear eye protection and r emove all metal jewelry such as watch bands or bracelets, which might make an unintended electrical contact. 2. Park the booster vehicle within cable r each but with- out letting the vehicles touch.
W ARNING! (Continued) • During cold weather when temperatures are be- low freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump-starting because the battery could rupture or explode. The battery temperature must be brought up above freezing point before attempting jump-start.
FREEING A STUCK VEHICLE If vehicle becomes stuck in snow , sand, or mud, it can often be moved by a rocking motion. Move the shift lever rhythmically between FIRST and REVERSE, while apply- ing slight pressur e to the accelerator .
W ARNING! • Chains are not recommended for freeing a stuck vehicle. Chains may break, causing serious injury or death. • Stand clear of vehicles when pulling with tow hooks. T ow straps and chains may break, causing serious injury . CAUTION! T ow hooks are for emergency use only , to rescue a vehicle stranded off road.
T wo-Wheel Drive V ehicles Provided that the transmission is operable, tow with the transmission in NEUTRAL and the ignition key in the OFF position, along with the front wheels raised and the rear wheels on the gr ound. The speed must not exceed 30 mph (50 km/h), and the distance must not exceed 15 miles (25 km).
MAINT AINING YOUR VEHICLE CONTENTS m Engine Compartment — 3.7L ............. 3 5 1 m Engine Compartment — 4.7L ............. 3 5 2 m Onboard Diagnostic System — OBD II ....... 3 5 3 ▫ Loose Fuel Filler Cap Message ........... 3 5 3 m Emissions Inspection And Maintenance Programs .
▫ Exhaust System ...................... 3 6 3 ▫ Cooling System ...................... 3 6 6 ▫ Brake System ....................... 3 7 1 ▫ Clutch Hydraulic System ............... 3 7 2 ▫ Manual T ransmission .................. 3 7 2 ▫ Automatic T ransmission .
ENGINE COMP ARTMENT — 3.7L 1 — Air Cleaner Filter 7 — Battery 2 — Automatic T ransmission Dipstick 8 — Power Steering Fluid Reservoir 3 — Engine Oil Dipstick 9 — Engine Oil Fill 4 — Br.
ENGINE COMP ARTMENT — 4.7L 1 — Air Cleaner Filter 7 — Engine Oil Fill 2 — Automatic T ransmission Dipstick 8 — Power Steering Fluid Reservoir 3 — Engine Oil Dipstick 9 — Coolant Pressur .
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a r ow , the system will turn on the MIL.
5. Appr oximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle.
Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings. Always maintain the oil level within the SAFE zone on the dipstick. Adding one quart/liter of oil when the reading is at the bottom of the SAFE zone will result in a r eading at the top of the safe zone on these engines.
The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil filler cap location, refer to “Engine Compart- ment” in this section. Lubricants which do not have both the engine oil certi- fication mark and the correct SAE viscosity grade num- ber should not be used.
Engine Air Cleaner Filter Refer to the “Maintenance Schedule” in Section 8 for proper maintenance intervals. W ARNING! The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air cleaner unless such removal is necessary for repair or maintenance.
W ARNING! (Continued) • Battery gas is flammable and explosive. Keep flame or sparks away from the battery . Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other .
include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you.
could result in failur e of the joint due to water , and dirt contamination of the grease. This would r equire com- plete replacement of the joint assembly .
Windshield W ashers The fluid reservoir should be checked for fluid level at regular intervals. When fr eezing weather is anticipated, flush out the water in the reservoir by operating the system.
W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, fol- low the preceding safety tips. The catalytic converter requir es the use of unleaded fuel only .
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Cooling System W ARNING! Y ou or others can be badly burned by hot coolant or steam from your radiator . If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot.
rinsing to remove all deposits and chemicals. Pr operly dispose of the old engine coolant (antifreeze) solution. Refer to the “Maintenance Schedule” in Section 8 for proper maintenance intervals. Selection Of Coolant Use only the manufacturer’s r ecommended engine cool- ant (antifreeze).
Please review these r ecommendations for using Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze). When adding engine coolant (antifr eeze): • The manufacturer r ecommends using.
W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
of this. As long as the engine operating temperatur e is satisfactory , the coolant recovery bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant recovery bottle.
• Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, also keep the front of the condenser clean. • Do not change the thermostat for Summer or W inter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat.
Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter or moisture. CAUTION! Do not allow a petroleum-base fluid to contaminate the brake fluid. Seal damage may result. Clutch Hydraulic System The clutch hydraulic system is a sealed maintenance-free system.
T o check the automatic transmission fluid level properly , the following procedur e must be used: 1. Operate the engine at idle speed and normal operating temperature. 2. The vehicle must be on level gr ound. 3. Fully apply the parking brake and press the brake pedal.
CAUTION! Be aware that if the fluid temperature is below 50° F (10° C) it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading.
CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid, other than the manufacturer’s recommended fluid, will result in more frequent fluid and filter changes.
components. Operation of the vehicle in water , as may be encountered in some of f-highway types of service, will requir e draining and refilling the axle to avoid damage. Lubricant Selection Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
The most common causes are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar . • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. W ashing • W ash your vehicle regularly .
Special Care • If you drive on salted or dusty roads, or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels be kept clear and open. • If you detect any stone chips or scratches in the paint, touch them up immediately .
YES Essentials t Fabric Cleaning Procedure – if equipped YES Essentials t seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel.
Stubborn soils can be removed easily with a soft cloth and MOP AR t T otal Clean. Care should be taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia-based cleaners to clean your leather upholstery .
Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water . Do not remove the belts fr om the car to wash them.
This center contains cartridge fuses, mini fuses and relays. A description of each fuse and component may be stamped on the inside cover , otherwise the cavity num- ber of each fuse is stamped on the inside cover that corresponds to the following chart.
Cavity Cartridge Fuse Mini- Fuse Description 8 10 Amp Red Cabin Compartment Node (CCN)/Mirror/ 4x4 9 Spare 10 2 Amp Gray Low Current Ignition Switch 1 1 10 Amp Red AC Clutch 12 15 Amp Blue T railer T .
Cavity Cartridge Fuse Mini- Fuse Description 23 20 Amp Y ellow Fog Lamps 24 20 Amp Y ellow Powertrain Control Module (PCM) B+ 25 15 Amp Blue Cabin Compartment Node (CCN) Illumi- nation 26 20 Amp Y ell.
Cavity Cartridge Fuse Mini- Fuse Description 39 30 Amp Pink Starter Solenoid 40 40 Amp Green Ignition Run Feeds 41 30 Amp Pink W iper Motor 42 25 Amp Natural Front Contr ol Module (FCM) 5 (T -Case) 43.
Cavity Cartridge Fuse Mini- Fuse Description 56 10 Amp Red Heated Seats 57 20 Amp Y ellow Airbag System # 2 58 20 Amp Y ellow Heated Seats 59 10 Amp Red HV AC Module 60 10 Amp Red ABS Module 61 20 Amp.
REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb No. Dome Light ........................ WL212–2 Cargo Light ............................ 9 2 1 Overhead Console Lights ................... 1 9 2 Reading Light ....................... WL212–2 LIGHT BULBS — Exterior Bulb No.
3. Grasp the headlight and pull firmly to disengage the headlight housing from the fender panel. 4. While firmly holding the headlight housing in your hands, unlock and disconnect headlight bulb connector . 5. T wist 1/4-turn and remove headlight bulb fr om hous- ing and replace.
Rear Side Marker , T aillamps/Stop Lamps, And T urn Signal Bulbs — Replacement 1. Remove the two screws that pass thr ough the bed sheet metal. 2. Pull the taillamp housing straight out fr om the body .
3. Rotate the bulb socket counter clockwise to remove it from the housing. 4. Pull bulb straight out of socket. 390 MAINT AINING YOUR VEHICLE.
5. Reverse this pr ocedure to install bulb and housing. Place the two raised blocks past the body . Center High-Mounted Stop Light And Cargo Lamp 1. Remove the two scr ews holding the housing/lens to the body , as shown.
2. Remove housing from the cab. 3. Remove connector fr om housing tab for more clearance. 392 MAINT AINING YOUR VEHICLE.
4. T urn desired bulb socket 1/4-turn and r emove socket and bulb from housing. 5. Pull desir ed bulb straight from the socket. • Outside Bulbs: Cargo Lamps • Inside Bulb: Center High Mounted Stop Light 6. Reverse this pr ocedure for installation of bulbs and housing.
License Lamps 1. Using a scr ewdriver , pry black rubber housing from the bumper . 2. Rotate the socket 1/4-turn counter clockwise. 394 MAINT AINING YOUR VEHICLE.
3. Pull bulb fr om socket. 4. Reverse this pr ocedure for installation. Fog Lights 1. Disconnect connector fr om fog light by raising the wire harness lock tab and pulling on wir e harness connector . 2. Rotate fog light bulb 1/4-turn counter clockwise and pull to remove fr om fog light housing.
FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 22 Gallons 83 Liters Engine Oil with Filter 3.7L Engine (SAE 5W -20, API Certified) 5 Quarts 4.7 Liters 4.7L/4.7L HO Engine (SAE 5W -20, API Certified) 6 Quarts 5.7 Liters Cooling System (Includes 2.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requir ements of Chrysler Material Standard MS-6395.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR t A TF+4 Automatic T ransmission Fluid T ransfer Case MOP AR t A TF+4 Automatic T ransmission Fluid Manual T ransmission (Getrag 238) MOP AR t A TF+4 Automatic T ransmission Fluid Clutch Linkage Multi-Purpose Gr ease, NLGI Grade 2 E.
MAINTENANCE SCHEDULES CONTENTS m Emissions Control System Maintenance ...... 4 0 0 m Maintenance Schedule .................. 4 0 0 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Con- trol System.
• Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first. Y our authorized dealer will reset the oil change indicator message after completing the scheduled oil change.
At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. • Check the manual transmission fluid level. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals NOTE: ** V ehicles built with the 4.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid, change if you are using your vehicle for police, taxi, fleet, off-road, or frequent trailer towing.
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (3.7L engines). ❏ Replace the top row of spark plugs (4.
48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary .
60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the ignition cables (3.7L engine). ❏ Replace the spark plugs (3.
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (3.7L engines). ❏ Replace the top row of spark plugs (4.
96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary .
108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary .
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the ignition cables (3.7L engine). ❏ Replace the spark plugs (3.
126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid, change if you are using your vehicle for police, taxi, fleet, off-road, or frequent trailer towing.
144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary .
W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 4 1 9 ▫ Prepar e For The Appointment ............ 4 1 9 ▫ Prepar e A List ....................... 4 1 9 ▫ Be Reasonable W ith Requests .
▫ Chrysler Canada Inc. Customer Center ..... 4 2 4 ▫ In Mexico Contact .................... 4 2 4 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
MOP AR T P ARTS Mopar t fluids, lubricants, parts, and accessories are available from an authorized dealer . They will help keep the vehicle operating at its best.
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Expr ess, and Discover orders ar e ac- cepted. If you prefer mailing your payment, please call for an order form.
Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orldwide W eb at: • www .techauthority .com DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration.
W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
and are most concerned that you get pr ompt and high quality service. The manufacturer’s authorized dealers have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner .
In Mexico contact: A v . Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P . 05109 Mexico, D. F . In Mexico City: 5081-4568 Outside Mexico City: 1-800-505-1300 Customer Assistance For The Hearing Or.
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience.
INDEX 10.
Adding Fuel ........................... 3 0 6 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 359 Air Conditioner Maintenance ............... 3 6 0 Air Conditioning ........................ 2 2 9 Air Conditioning, Operating T ips .......... 229,232 Air Conditioning Refrigerant .
Battery ............................... 3 5 9 Charging ............................ 3 4 3 Emergency Starting ..................... 3 4 3 Gas Caution .......................... 3 4 3 Keyless T ransmitter Replacement (RKE) ....... 2 6 Saving Feature (Pr otection) .
Chart, T ire Sizing ........................ 2 7 3 Check Engine Light (Malfunction Indicator Light) ................................ 3 5 4 Child Restraint ........................ 58,59 Child Restraint T ether Anchors ............. 61,66 Child Seat ..
Data Recorder , Event ...................... 5 6 Daytime Running Lights ................... 1 2 6 Dealer Service .......................... 3 5 6 Defroster , Rear W indow ................... 1 5 6 Defroster , W indshield ................... 72,230 Delay (Intermittent) W ipers .
Exhaust Gas Caution .................. 71,302 Flooded, Starting ...................... 2 4 0 Fuel Requirements ..................... 3 9 6 Jump Starting ......................... 3 4 3 O i l ........................... 356,396,397 Oil Filler Cap .....
Fluid Level Checks Automatic T ransmission ................. 3 7 2 Brake ............................... 3 7 1 Engine Oil ........................... 3 5 6 Power Steering ........................ 2 6 6 T ransfer Case ......................... 3 7 5 Fluids, Lubricants and Genuine Parts .
Gross Axle W eight Rating ............... 309,31 1 Gross Car go W eight ...................... 3 0 8 Gross V ehicle W eight Rating ................ 3 1 1 GVWR ............................... 3 0 8 Hands-Free Phone (UConnect t ) .............. 8 2 Hazard Driving Through Flowing, Rising, or Shallow Standing W ater .
Intermittent W ipers (Delay W ipers) ........... 1 3 0 Introduction ............................. 4 Jack Operation ....................... 332,337 Jacking Instructions ...................... 3 3 8 Key , Programming ........................ 1 7 Key , Replacement .
Lights On Reminder .................... 1 2 6 Low Fuel ............................ 1 6 8 Malfunction Indicator (Check Engine) ........ 1 7 5 Passing ............................. 1 2 8 Seat Belt Reminder ..................... 1 6 9 Service ..........
Electric Powered ....................... 8 1 Outside .............................. 8 0 Rearview ............................. 8 0 Modifications/Alterations, V ehicle ............. 7 Monitor , T ire Pressur e System ............... 2 9 2 Mopar Parts .
Parking Brake .......................... 2 6 7 Parking On Hill ......................... 2 6 7 Passing Light ........................... 1 2 8 Pets .................................. 7 0 Pets, T ransporting ........................ 7 0 Phone, Cellular .
Recorder , Event Data ...................... 5 6 Recreational T owing ...................... 3 2 4 Shifting into T ransfer Case Neutral (N) ....... 3 2 5 Shifting out of T ransfer Case Neutral (N) ..... 3 2 7 Reformulated Gasoline ....................
Seats ................................. 1 1 5 Adjustment .......................... 1 1 5 Cleaning ............................ 3 7 9 Heated ............................. 1 2 0 Lumbar Support ....................... 1 1 7 Reclining ...................
Emergency (Jump Starting) ............... 3 4 3 Engine Block Heater .................... 2 4 1 Engine Fails to Start .................... 2 4 0 Remote .............................. 2 7 Steering Column Controls ...................... 1 2 7 Power .....
High Speed .......................... 2 8 2 Inflation Pressur es ..................... 2 8 1 Jacking ............................. 3 3 7 Life of T ires .......................... 2 8 6 Load Capacity ..................... 276,277 Pressur e Monitor System (TPMS) .
T ransaxle ............................. 2 4 5 Automatic ......................... 12,245 Manual .............................. 1 4 Operation ........................... 2 4 5 T ransfer Case ........................... 3 7 5 Fluid ....................
W arning Lights (Instrument Cluster Description) ........................... 1 6 8 W arnings and Cautions ..................... 6 W arranty Information ..................... 4 1 9 W ashers, W indshield ..................... 1 3 1 W ashing V ehicle ...
INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGSAND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/AL TERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORDABOUT YOUR KEYS.
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel.
2009 DA KOTA D A KOT A Chrysler LL C 81-326-0934 First Edition Printed in U.S.A. OWNER ’S MANUAL 2009.
An important point after buying a device Dodge 2009 Dakota (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dodge 2009 Dakota yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dodge 2009 Dakota - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dodge 2009 Dakota you will learn all the available features of the product, as well as information on its operation. The information that you get Dodge 2009 Dakota will certainly help you make a decision on the purchase.
If you already are a holder of Dodge 2009 Dakota, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dodge 2009 Dakota.
However, one of the most important roles played by the user manual is to help in solving problems with Dodge 2009 Dakota. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dodge 2009 Dakota along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
