Instruction/ maintenance manual of the product LT-0424 DMP Electronics
Go to page of 4
PROGRAMMING INSTRUCTIONS Ether-Com TM L T -0424 (1/99) 2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282 Description The Ether-Com TM Single P or t Router allows a DMP 1912XR, XR200 or XR200-485 Command Processor TM panel to communicate to a DMP SCS-1 Receiv er using an e xisting Ether net network.
3. CHANGE RARP DISABLED Connect the ETHER-COM to an Ethernet network after entering the command in line number 3. It should be connected to the actual network at the location where the ETHER-COM will be permanently installed. 4. INIT 451 The ETHER-COM initialization will begin 5 seconds after pressing the Retur n k ey .
5. CHANGE FLOW CONTROL NONE 6. CHANGE DEDICA TED TCP xxx.xxx.xxx.xxx: 2001U (where xxx... is the IP address of the Ether-Com TM connected to the SCS-1 Receiv er or PC running Remote Access+ TM ). 7. CHANGE A UT OST A RT ENABLED 8. SHOW SER VER - Check and confirm the unit’ s IP address , Subnet Mask and the Gate wa y address.
Digital Monitoring Products 2841 E. Industr ial Drive Springfield, MO 65802-6310 800-641-4282.
An important point after buying a device DMP Electronics LT-0424 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DMP Electronics LT-0424 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DMP Electronics LT-0424 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DMP Electronics LT-0424 you will learn all the available features of the product, as well as information on its operation. The information that you get DMP Electronics LT-0424 will certainly help you make a decision on the purchase.
If you already are a holder of DMP Electronics LT-0424, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DMP Electronics LT-0424.
However, one of the most important roles played by the user manual is to help in solving problems with DMP Electronics LT-0424. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DMP Electronics LT-0424 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
