Instruction/ maintenance manual of the product 5 Wire Analog Resistive Touchscreen FST Series DMC
Go to page of 13
5 Wire Analog Resistive T ouchscreen FST Series Product S pecifications.
DER-S0081A 2 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s T able of Contents 1. Product Speci fications ................................................................................................... 3 1-1. Product Applic able .
DER-S0081A 3 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 1. Product Specifications 1-1. Product Applicable § This specification is applied to the 5 wire analog resistive touchscreen: FST Series. 1-2. Structur e § Dimensions, structure, and shape ar e referred on the drawing attached.
DER-S0081A 4 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 1-6. Appearance § Scratch, dust (W = width, L = length, D = average diam eter = (longest + shortest) /2) Item Wid th (mm) Length (mm) Accept able Numbers T otal 0.
DER-S0081A 5 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 2. T esting Regulation 2-1. T esting Regulation § If the regulation is not specif ied, the test is performed und er the supplier ’s regulation. § T ests are performed under the room temperature unless specified.
DER-S0081A 6 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 2-4. Electrical Characteristics § T erminal Resistance T est Condition: T op and bottom electrod es are measured at the terminal. Judgement: Must satisfy the specification.
DER-S0081A 7 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 3. Reliability Condition 3-1. T emperature Conditi on § T emperature Condition T est Following test are performe.
DER-S0081A 8 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 5. Handling Notes 5-1. Precautions § This product is intended for use in standard applic ations (computers, office automation, and other office equipment, industrial, communications, and measur em ent equipment, personal and hou sehold devices, etc.
DER-S0081A 9 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 5-5. Mounting Notes § Gap bet ween the Bezel and T ouchscr een A gap of approximately 0.5 mm is needed bet ween the bezel and the top electrode. It may ca use une xpected input if the gap is too narrow .
DER-S0081A 10 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 6. W arranty 6-1. W arranty Period § The warranty period is limited to 3 years from the dat e of shipping. The warrant y for the initial defection such as appearance defection is limited to 1 month.
DER-S0081A 1 1 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 7. Revision history Rev1.0 (May 1 1, 2005) Initial release Rev1.1 (July 13, 2005) 4-1.Recommended Connector is chang ed RE-H052SD-1 130 to RE-H052S D-1 1 10. 6-1.
DER-S0081A 12 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s 6-6. RoHS Compliance: Description abou t RoHS compliance has been added.
DER-S0081A 13 Rev . 4.0 ©2005 - 201 1 DMC Co., Ltd. FST Series Product Specification s FST Series Product S pecifications Rev . 4.0, Augu st 25, 201 1 © 2005 - 2010 DMC Co., Ltd. This document can be freely distributed, but any alternation to this docum ent is prohibited.
An important point after buying a device DMC 5 Wire Analog Resistive Touchscreen FST Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DMC 5 Wire Analog Resistive Touchscreen FST Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DMC 5 Wire Analog Resistive Touchscreen FST Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DMC 5 Wire Analog Resistive Touchscreen FST Series you will learn all the available features of the product, as well as information on its operation. The information that you get DMC 5 Wire Analog Resistive Touchscreen FST Series will certainly help you make a decision on the purchase.
If you already are a holder of DMC 5 Wire Analog Resistive Touchscreen FST Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DMC 5 Wire Analog Resistive Touchscreen FST Series.
However, one of the most important roles played by the user manual is to help in solving problems with DMC 5 Wire Analog Resistive Touchscreen FST Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DMC 5 Wire Analog Resistive Touchscreen FST Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
