Instruction/ maintenance manual of the product CR-AS16 Aiwa
Go to page of 2
amsa CR-ASI 6W RADIO RECEIVER RECEPTOR DE LA RADIO OPERATING’INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D’EMPLOI OWNER’S RECORO For your convenience, record the model number (you will find it on the rear of the unit) and aerial number (you will find it in the batfery compartment) in thespsce provided below.
RADIO RECEP1’10N + ❑ 1 Turn the VOL control’ upward to turn on the radio. 2 Select AM or FM. 3 Turn the TUNING control to tune in to a station. When a station is tuned in to, the TUNING indicator lights. After listening, turn the VOL control downward until it clicks.
An important point after buying a device Aiwa CR-AS16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa CR-AS16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa CR-AS16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa CR-AS16 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa CR-AS16 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa CR-AS16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa CR-AS16.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa CR-AS16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa CR-AS16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
