Instruction/ maintenance manual of the product CDC-X427 Aiwa
Go to page of 9
CDC-X427 YUC STEREO CAR CD RECEIVER RADIO-TOCADISCOS DE CD ESTEREOFONICO PARA AUTOMOVIL OWNER’S RECORD For your convenience, record the model number and serial number (you will find them on the bottom side of your set) in the space provided below. Please refer to them when you contact your AIWA dealer in case of difficulty.
1 ENGLISH PRECAUTIONS • Use only in a 12-volt DC negative-ground electrical system. • Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit. • When replacing the fuse, be sure to use one with an identical amperage rating.
ENGLISH 2 ENGLISH 2 THEFT PROTECTION Take the front panel with you when leaving the car, and keep it in the supplied carrying case. Detaching the front panel Before detaching the front panel, remove the CD to prevent possible damage to the unit. 1 Press z to remove the CD.
3 ENGLISH 3 ENGLISH Adjusting sound You can select the following modes for adjusting sound depending on the music you listen to: BASS (low frequencies), TRE (high frequencies), BAL (left/right), FAD (front/ rear) and H-BASS (high bass). 1 Press SEL repeatedly to select the mode to be adjusted.
ENGLISH 4 ENGLISH 4 Monaural mode When signals become weak, or reception becomes poor, the unit automatically switches to Monaural mode to reduce noise. Local mode Local mode allows you to tune in only to strong stations during Seek Tuning. 1 Press LO before you start seek tuning.
5 ENGLISH 5 ENGLISH Intro Play You can locate a desired track by monitoring the first 10 seconds of all the tracks on a CD. 1 Press INT during CD play. “ SCAN ” appears in the display. 2 Press INT again when the desired track is played. The unit returns to normal CD play.
ENGLISH 6 ENGLISH 6 AUDIO CONTROL OTHER FUNCTIONS SRC Changing the key illumination color You can choose blue or red as the key illumination color. 1 Press and hold SRC until “ ILL ” appears in the display. 2 Turn AUDIO CONTROL to select 1 (for blue) or 2 (for red).
7 ENGLISH TROUBLESHOOTING Error code In the following cases the corresponding error code indication appears. Follow the suggestions below to solve such problems. If the error code indication does not disappear, consult an AIWA service center. E03 Focus error.
Printed in Indonesia.
An important point after buying a device Aiwa CDC-X427 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa CDC-X427 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa CDC-X427 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa CDC-X427 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa CDC-X427 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa CDC-X427, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa CDC-X427.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa CDC-X427. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa CDC-X427 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
