Instruction/ maintenance manual of the product 6000 Directed Electronics
Go to page of 20
This de vice complies with par t 15 of FCC rules. Operation is subject to the f ollowing two conditions: (1) This de vice ma y not cause harmful interference , and (2) This de vice m ust accept any interf erence receiv ed, including inter- f erence that ma y cause undesired operation.
2 © 1996 Directed Electronics, Inc. T able of C ontents System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Y our W arranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 © 1996 Directed Electronics, Inc. What is included ■ The control module ■ A pair of two-b utton transmitters ■ A Stinger ® DoubleGuard ® dual-output shock sensor ■ The Re venger ® Soft C.
4 © 1996 Directed Electronics, Inc. T ransmitter Channels Channel I The arm/disar m and panic functions, are usually controlled b y Button I. Channel II The Silent Mode ™ /trunk release function, is usually controlled by Button II. Silent Mode ™ and Remote V alet ® work by pressing b utton II for less than one second.
5 © 1996 Directed Electronics, Inc. Using Y our S ystem Arming Y ou can tur n on, or arm , the system b y pressing button I of y our transmitter f or one second. When the system arms, y ou will hear a short siren sound, or chirp , and see the parking lights flash once.
6 © 1996 Directed Electronics, Inc. to disar m the system with y our transmitter if you inadv er tently open the door while the system is ar med, while still pro viding instant response (e v en if the door is immediately closed). • T ur ning on the ignition ke y will tr ip the same two-stage response as opening a door .
7 © 1996 Directed Electronics, Inc. to check the v ehicle visually . The tr igger will stop , but the v ehicle will remain protected. T o disar m with the transmitter during a trigger , press Button I on your tr ansmitter . The siren will stop sounding.
8 © 1996 Directed Electronics, Inc. V alet ® Mode Y ou can prev ent your system from automatically arming and tr iggering by using V alet ® Mode. This is ver y useful when w ashing the vehicle or having it ser viced.
9 © 1996 Directed Electronics, Inc. trigger the system while it is being bypassed, the 60-minute b ypass period will star t ov er . This ensures that a sensor that continuously triggers will remain bypassed.
10 © 1996 Directed Electronics, Inc. Diagnostics The microprocessor at the hear t of your system is constantly monitoring all of the s witches and sensors connected to it. It detects any f aulty switches and sensors and pre vents them from disab ling the entire system.
11 © 1996 Directed Electronics, Inc. Table of Zones The zone number is the number of LED flashes used by the system to iden- tify that input. The standard input assignments are listed below , along with spaces to write in any optional sensors or s witches you ha ve had installed.
12 © 1996 Directed Electronics, Inc. C ode Hopping ™ Explained The receiver and tr ansmitters each use a mathematical formula called an algorithm to change their code each time the transmitter is used. This tech- nology has been de v eloped to increase the security of the unit.
13 © 1996 Directed Electronics, Inc. NOTE: If the door is open when the ignition is turned on, the doors will not lock. • P anic mode enabled /disab led with the ignition on. (Some states hav e laws against siren capability in a moving v ehicle). • A utomatic Engine Disable (AED) on or off .
14 © 1996 Directed Electronics, Inc. V ehicle R ecovery S ystem (V RS ® )* The optional V ehicle Recovery System feature is designed to ensure that an y unauthorized user of your v ehicle (ev en if using your ke ys and remote con- trol) will not be able to permanently separate you from y our vehicle .
15 © 1996 Directed Electronics, Arming the VR S ® T o ar m the VRS ® , push the b utton once. This can be done before driving or while driving the vehicle. Once the system is ar med, it will go into its triggered sequence (see below) if an y door is opened and closed.
F rom this point on, when the ignition k e y is turned off, the VRS ® will immediately turn on the F ailSafe ® starter kill. This will pre- vent the v ehicle from being restar ted, thus immobilizing it at that spot. Three minutes after the constant siren output begins, the flashing parking lights and the siren will stop.
17 © 1996 Directed Electronics, Inc. Gloss ary of T erms Control Unit The “brain” of y our system. Usually hidden under neath the dash area of the vehicle . It houses the microprocessor which monitors y our vehi- cle and controls all of the alarm's functions.
18 © 1996 Directed Electronics, Inc. Security & C onvenience Expansions Here we ha v e listed only some of the many e xpansion options av ailable .
19 QU ICK RE FE RE NCE OPE RA TING C ARD : Arming ▼ Y ou can turn on, or ar m, the system b y pressing Button I of your transmitter f or one second. When the system arms, you will hear a shor t chir p, and see the parking lights flash once . Arming While Driving ▼ Press Button I on y our transmitter while the v ehicle is r unning.
S ystem Ref er ence Car d Directed Electronics, Inc. 2560 Progress Street Vista, CA 92083-8491 © Copyright 1990, 1996 Directed Electronics, Inc. - All rights reserved G437 12/96 The company behind DEI ® is Directed Electr onics, Inc. Since its inception, the company known as Directed Electronics, Inc.
An important point after buying a device Directed Electronics 6000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Directed Electronics 6000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Directed Electronics 6000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Directed Electronics 6000 you will learn all the available features of the product, as well as information on its operation. The information that you get Directed Electronics 6000 will certainly help you make a decision on the purchase.
If you already are a holder of Directed Electronics 6000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Directed Electronics 6000.
However, one of the most important roles played by the user manual is to help in solving problems with Directed Electronics 6000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Directed Electronics 6000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
