Instruction/ maintenance manual of the product 530T Directed Electronics
Go to page of 8
1 N530T 1/00 © 2000 Directed Electroni cs, Inc . 530T W indow Automation System The 530T win d ow automati on system contr ols th e operati on of two vehi cle win dows in both th e up an d down directi on s.
2 © 2000 Directed Electroni cs, Inc . N530T 1/00 T ype B power win dow system s are comm on in many Eur opean cars, su ch as Merced es Benz and P orsche . In the type B system, the power win d ow wires will r est at (+)12V igniti on and the switch will switch on e of th e wires to (-) groun d to activate th e wind ow motor .
3 N530T 1/00 © 2000 Directed Electroni cs, Inc . Some win d ow systems use eith er a centr al control m odule , or contr ol mod ules in each door . These systems ar e less common than dir ect wir ed systems . These can be f ound in man y newer V olkswagen s, BMWs , Isuzus, M aximas and Gr an d Cher okees .
4 © 2000 Directed Electroni cs, Inc . N530T 1/00 ______ ______ ______ ______ ______ ______ ______ ______ H1/1 VIOLET Driver-Side Gr ound P ath Input: This wire provi des the gr ound path f or the driver-si de m otor . Connect this wir e to a pain t-free surf ace on the vehi cle chassis.
5 N530T 1/00 © 2000 Directed Electroni cs, Inc . H1/3 BLUE Driver-Side Up Motor Input: Cut th e d river-sid e up wire at th e switch (see NO TE on page 1) an d connect this wir e to th e motor si de o f the up wire . H1/4 RED (+)12V Constant, 20A Fused: Connect to a fused sour ce o f constan t 12V .
6 © 2000 Directed Electroni cs, Inc . N530T 1/00 NOTE: If the security system does not have a ground-when-armed output, a negative lock pulse from the security system can be used to roll the windows up, as shown in the following diagram.
7 N530T 1/00 © 2000 Directed Electroni cs, Inc . Dipswitch #5 contr ols th e polarity that the 530T switch input wir es will respon d to. For type A and type C systems , it m ust be set to the OFF (+) positi on. When th e switch is in the off positi on the 530T r esponds to (+) positive inputs on its switch wires .
8 © 2000 Directed Electroni cs, Inc . N530T 1/00 NOTE: If “one-touch” operation is desired from the passenger-side switch, the passenger-side wires must be run into the passenger-side door and interfaced between the passenger-side switch and the motor .
An important point after buying a device Directed Electronics 530T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Directed Electronics 530T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Directed Electronics 530T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Directed Electronics 530T you will learn all the available features of the product, as well as information on its operation. The information that you get Directed Electronics 530T will certainly help you make a decision on the purchase.
If you already are a holder of Directed Electronics 530T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Directed Electronics 530T.
However, one of the most important roles played by the user manual is to help in solving problems with Directed Electronics 530T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Directed Electronics 530T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
