Instruction/ maintenance manual of the product LA 16TR Dimplex
Go to page of 36
Order No.: 452159.67.07 FD 8602 CE INST ALLA TION and OPERA TING INSTRUCTIONS Air-to-W ater Heat Pump for Outdoor installation L A 6M R LA 12TR L A 8M R LA 16TR L A 10MR.
2 1 READ IMMEDIA TEL Y 3 1.1 Important Information 1. 2 Legal Provisions and Guidelines 1. 3 Energy-Efficient Use of the Heat Pump 2 PURPOSE OF HEA T PUMP 4 2. 1 Field of Application 2. 2 Principle of Operation 3 SCOPE OF DELIVER Y 4 3. 1 Baseline Unit 3.
3 READ IMMEDIA TEL Y 1.1 Important Information Do not open the unit unless all electrical circuits have been disconnected from the power supply . During transport, the heat pump must not be tilted more than 45 ° (in either direction). Heat pump and transport pallet are only connected by the packaging film.
4 PURPOSE OF HEA T PUMP SCOPE OF DELIVER Y PURPOSE OF HEA T PUMP 2.1 Field of Application The air-to-water heat pump is intended for use in existing or newly built heating systems.
5 TRANSPORT INST ALLA TION 4 CAUTION! TRANSPORT During transport, the heat pump must not be tilted more than 45 ° (in either direction). The unit should be transported to the final installation site on a wooden pallet.
6 MOUNTING 6 MOUNTING 6.1 General The following connections need to be established on the heat pump: - supply/return lines of the heating system - condensate drain - control lead to the remote control - power supply 6.
7 COMMISSIONING 7 COMMISSIONING 7.1 General T o ensure proper commissioning it should be carried out by an after-sales service authorized by the manufacturer . Only then can an extended warranty period of 3 years in total be granted (cf. Warranty service).
8 FUNCTIONAL DESCRIPTION 8 FUNCTIONAL DESCRIPTION 8.1 Heat Pump Remote Control Unit The heat pump can be switched on and off by means of the remote control positioned inside the building. Switching off in this case means switching to a "standby" function, i.
9 CLEANING / CARE 9. 1 Care T o protect the paint finish, avoid placing objects against or on the unit. The external parts of the heat pump can be wiped with a damp cloth and commercially available cleaning agents. Do not use any cleaning agents containing sand, soda, acid or chloride as these may damage the surface.
10 CLEANING / CARE MALFUNCTIONS / TROUBLESHOOTING DECOMMISSIONING Caution - Heating Contractors Depending on the water quality and quantity , in particular in the case of mixed installations and plastic pipes, mineral deposits (rust sludge, lime) may form impairing the proper functioning of the heating installation.
11 APPENDIX 12.1 DIMENSIONED DRAWING 1 2 12.2 EQUIPMENT D A T A 13 12.3 SCHEMA TICS 12.3.1 Heating mode LA 6MR 14 12.3.2 Cooling mode LA 6MR 15 12.3.3 Heating mode LA 8MR 16 12.3.4 Cooling mode LA 8MR 17 12.3.5 Heating mode LA 10MR 18 12.3.6 Cooling mode LA 10MR 19 12.
12 Dimensioned Drawing APPENDIX: 12.1 DIMENSIONED DRAWING 35 (circumferential) Electr . connection box (inspection side) Air discharge end Condensate drain Condensate drain Condensate pan Condensate t.
13 EQUIPMENT DATA for air-to-water heat pumps for heating 1 TYPE AND COMMERCIAL DESCRIPTION LA06MRN LA08MRN LA10MRN LA12TRN LA16TRN 2 MODEL 2.1 Type reversible reversible reversible reversible reversible 2.2 Enclosure type acc. to EN 60 529 for compact unit and/or heating element IP 24 IP 24 IP 24 IP 24 IP 24 2.
14 0 1 2 3 4 5 6 7 8 9 10 11 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Heizleistung in [kW ] 35 50 W asseraustritts temperatur in [°C] 0 1 2 3 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
15 12.3.2 Cooling mode LA 6MR APPENDIX: 12.3 SCHEMA TICS 0 2 4 6 8 10 12 14 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Kühlleistung in [k W ] 18 8 W asseraustritts temperatur in [°C] 0 1 2 3 4 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
16 0 1 2 3 4 5 6 7 8 9 10 11 12 13 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Heizleistung in [kW ] 35 50 W asseraustritts temperatur in [°C] 0 1 2 3 4 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
17 12.3.4 Cooling mode LA 8MR APPENDIX: 12.3 SCHEMA TICS 0 2 4 6 8 10 12 14 16 18 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Kühlleistung in [k W ] 18 8 W asseraus trittstemperatur in [°C] 0 1 2 3 4 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
18 12.3.5 Heating mode LA 10MR APPENDIX: 12.3 SCHEMA TICS 0 2 4 6 8 10 12 14 16 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Heizleistung in [kW ] 35 50 W asseraustritts temperatur in [°C] 0 1 2 3 4 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
19 12.3.6 Cooling mode LA 10MR APPENDIX: 12.3 SCHEMA TICS 0 2 4 6 8 10 12 14 16 18 20 22 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Kühlleistung in [k W ] 18 8 W asseraus trittstemperatur in [°C] 0 1 2 3 4 5 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
20 12.3.7 Heating mode LA 12TR APPENDIX: 12.3 SCHEMA TICS 0 2 4 6 8 10 12 14 16 18 20 22 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Heizleistung in [kW ] 35 50 W asseraustritts temperatur in [°C] 0 1 2 3 4 5 - 2 0 - 1 0 0 1 0 2 03 04 0 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
21 APPENDIX: 12.3 SCHEMA TICS 12.3.8 Cooling mode LA 12TR 0 5 10 15 20 25 30 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Kühlleistung in [k W ] 18 8 W asseraus trittstemperatur in [°C] 0 1 2 3 4 5 6 7 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
22 12.3.9 Heating mode LA 16TR APPENDIX: 12.3 SCHEMA TICS 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Heizleistung in [kW ] 35 50 W asseraustritts temperatur in [°C] 0 1 2 3 4 5 6 7 - 2 0 - 1 0 0 1 02 03 04 0 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
23 APPENDIX: 12.3 SCHEMA TICS 12.3.10 Cooling mode LA 16TR 0 5 10 15 20 25 30 35 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Kühlleistung in [k W ] 18 8 W asseraus trittstemperatur in [°C] 0 1 2 3 4 5 6 7 8 10 15 20 25 30 35 40 45 50 Lufteintrittstem peratur in [°C] Leistungsauf nahme (incl.
24 12.4.1 Control LA 6MR-LA 10MR APPENDIX: 12.4 WIRING DIAGRAMS ON/OFF Call Heating/cooling Copressor Fan Reversing valve Heating circulating pump Back-up heater Attention! Low voltage Supply sensor E.
25 12.4.2 Load LA 6MR-LA 10MR APPENDIX: 12.4 WIRING DIAGRAMS Jumper 4kW Jumper 6kW Mains supply Back-up heater Mains supply.
26 APPENDIX: 12.4 WIRING DIAGRAMS 12.4.3 T erminal Diagram LA 6MR-LA 10MR Jumper 4kW ye/gn ye/gn Jumper 6kW Mains supply Mains supply for back-up heater Switch box LA 6-10 Connecting lead Connecting l.
27 A1 Wire jumper: The jumper must be removed for external control (via potential-free contact) or when a dew point monitor (via potential-free contact) is used.
28 APPENDIX: 12.4 WIRING DIAGRAMS 12.4.5 Control LA 12TR-LA 16TR Call Heating/cooling Copressor Fan Reversing valve Heating circulating pump Back-up heater Attention! Low voltage Supply sensor Externa.
29 APPENDIX: 12.4 WIRING DIAGRAMS 12.4.6 Load LA 12TR-LA 16TR Mains supply - load.
30 APPENDIX: 12.4 WIRING DIAGRAMS 12.4.7 T erminal Diagram LA 12TR-LA 16TR ye/gn Mains supply Connecting lead Switch box LA 12-16.
31 12.4.8 Legend LA 12TR-LA 16TR A1 Wire jumper: For external control (via potential-free contact) or use of a dew point monitor (via potential-free contact) the jumper must be removed.
32 12.5.1 Mono-energetic system APPENDIX: 12.5 HYDRA ULIC BLOCK DIAGRAMS Overflow valve Safety assembly Circulating pump Expansion vessel Thermostat/manual valve Shut-off valve with drain Heat consume.
33 APPENDIX: 12.5 HYDRA ULIC BLOCK DIAGRAMS 12.5.2 Mono-energetic systems and domestic hot water function Overflow valve Safety assembly Circulating pump Expansion vessel Thermostat/manual valve Three.
34 EC Declaration of Conformity APPENDIX: 12.6 EC DECLARA TION OF CONFORMITY Declaration of Conformity The undersigned Glen Dimplex Deutschland GmbH Division Dimplex Am Goldenen Feld 18 D-95326 Kulmba.
Notes 35.
Glen Dimplex Deutschland GmbH Subject to technical modifications Division Dimplex T elefax (0 92 21) 709-589 Am Goldenen Feld 18 www .dimplex.de D-95326 Kulmbach.
An important point after buying a device Dimplex LA 16TR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex LA 16TR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex LA 16TR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex LA 16TR you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex LA 16TR will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex LA 16TR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex LA 16TR.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex LA 16TR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex LA 16TR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
