Instruction/ maintenance manual of the product DX4130 Dimplex
Go to page of 3
Passive Infra-Red Detector Switch Model No. DX4130 Height Width Depth 130mm 85mm 145mm THESE INSTRUCTIONS SHOU LD BE READ CAREFULLY AND RETAINED FOR FUTURE RE FERENCE General The Dimplex passiv e infr.
Installation continued 5. Insert top s crew into th e wall, allow ing it to prot rude by approxim ately 3mm. 6. Hook wall box on to screw us ing key hole slot provide d. 7. Mark pos ition of remaini ng fixings , remove b ox and com plete fixing . 8. Fix the w all box to th e wall, ensurin g the drain hole is at th e bottom.
Testing 1. Set the light level 5 to maximum (clockwise), and the time o n to minimum (anti-clockwise ). 2. Move in and out of de tection pattern checking the P IR detector switches load on and then off. Once the de tection area has be en set satisfactorily, adjust the time (blue knob) to the desired level.
An important point after buying a device Dimplex DX4130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex DX4130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex DX4130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex DX4130 you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex DX4130 will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex DX4130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex DX4130.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex DX4130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex DX4130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
