Instruction/ maintenance manual of the product DS5629 Dimplex
Go to page of 11
PRACTICAL USER’S GUIDE FOR THE ELECTRIC STOVE DS5629 Valued Customer, We are pleased that you have chosen to purchase an electric stove manufactured by Dimplex North America Limited.
CONTENTS P AGE 1 Import ant Instructions P AGE 2 Model and Serial Number Information P AGE 3 Stove Inst allation P AGE 3 Operation P AGE 4 Maintenance P AGE 7 W arranty.
QUICK REFERENCE GUIDE FOR THE ELECTRIC ST OVE 1. Prior to the first use of the Stove verify the following: • Are the circuit breakers for the unit on? • Are the light bulbs in your St ove loose? (to check, fo llow the instructions for replacing the li ght bulbs under the maintenance section of this manual) 2.
IMPORT ANT INSTRUCTIONS PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCE When using electrical appliances, ba sic precautions s hould always be followed to reduce the risk of fire, electric shock, and injury to persons, including t he following: 1.
Model Number Serial Number Serial Number Label SAVE THESE INSTRUCTIONS IMPORT ANT INSTRUCTIONS NOTE: Procedures and techniques that ar e considered important enough to emphasize. CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment.
NOTE A 15amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, t he circuit breaker trips or fuse blows on a regular basis when the heater is operat ing.
RESETTING THE TEMPERATURE CUTOFF SWITCH Should the heater overheat, an aut omatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching t he MAIN ON/OFF S WITCH to OFF and waiting 5 minutes before switching the unit back on.
TOOL REQUIREMENTS Phillips screw driver HELPFUL HINTS It is a good idea to replace all light bulbs at one ti me if they are close to the end of their rated life. Group replacement will r educe the number of times you need to open the unit to replace light bulbs.
GLASS CLEANING The clear door is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the clear door may collect dust particles, these can be removed by dusting lightly with a clean dry cloth. To remove fingerprints or other marks, the clear door can be cleaned wit h a damp cloth.
ONE YEAR LIMITED W ARRANTY Products to which this limited warranty applies This limited warranty applies to your newly pu rchased Dimplex electric stove.
Dimplex will in its sole discretion either repair or replace su ch de fective pr oduct or part without charge. If Dimplex is unable to re pair or repl ace such produc t or part, or if repair or re.
An important point after buying a device Dimplex DS5629 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex DS5629 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex DS5629 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex DS5629 you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex DS5629 will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex DS5629, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex DS5629.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex DS5629. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex DS5629 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
