Instruction/ maintenance manual of the product R600 Airpura Industries
Go to page of 2
Replace the 4 screws and tighten Turn the Airpura back onto it's casters Replace the gasket To close the filter chamber Position the indentation in the cover into the center of the HEPA filter Op.
To vacuum the pre-filter Filter Maintenance and Replacement The HEPA Filter Use the brush attachment on your vacuum cleaner Vacuum slowly around the mesh surface of the filter chamber The Pre-Filter The Activated Carbon Filter Can be vacuumed from the exterior of the unit once a month or more often.
An important point after buying a device Airpura Industries R600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airpura Industries R600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airpura Industries R600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airpura Industries R600 you will learn all the available features of the product, as well as information on its operation. The information that you get Airpura Industries R600 will certainly help you make a decision on the purchase.
If you already are a holder of Airpura Industries R600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airpura Industries R600.
However, one of the most important roles played by the user manual is to help in solving problems with Airpura Industries R600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airpura Industries R600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
