Instruction/ maintenance manual of the product ENG Lenses DigiPower
Go to page of 8
1 Operational Instructions for DigiPower ENG Lenses The zoom can be operated in the following five operation modes. 1. Operation by Zoom Seesaw Control Lever 2. QuickZoom Operation 3. Auto Cruising Zoom Operation 4. Manual Operation 5. Zoom Limit Operation The remote control operation is also available with optional accessor ies.
2 Control of Zoom Maximum Speed By means of the zoom maximum speed control knob the zoom maximum speed can be changed in seven steps. Rotate the knob clockwise to increase the spee d. 2. QuickZoom Operation In quickzoom operation, pressing a switch moves the zoom to the tele end quickly.
3 Note 2. In quickzoom operation, the zoom moves at the maximum speed irrespective of the setting position of the zoom maximum speed control knob. Note 3. If you press the quickzoom & auto cruising zoom switch while pressing the zoom seesaw control lever, the zoom moves in auto cruising zoom operation, not in quickzoom operation.
4 4. Manual Operation a. Set the servo/manual select switch to “M”. b. Rotate the zoom ring directly or using the zoom lever. Clockwise rotation of the zoom ring, viewed from the camera side, moves the zoom to the wide side, and counterclockwise rotation to the tele side.
5 Setting of Zoom Limit Positions Note: Before shipment from the factory, the zoom limit positions were se t at the tele and wide ends respectively. a.
6 Note 2: If a zoom rate demand unit that has the zoom lim it function is connected to the lens, the validity of the zoom limit function differs depending on the type (digital or analog) of the zoom rate demand unit. ¾ With a digital zoom rate demand unit, the zoom lim it function of the zoom rate demand unit will be valid.
7 Zoom Preset Operation In this operation, the zoom moves to a predetermined position by pressing a switch. Setting Zoom Preset Operation Mode a. Set the preset ON/OFF switch to ON. (The switch has been set to ON at the factory.) b. Set the function switch to OFF.
8 Recalling the Preset Shot a. Press the preset switch (ON) of the lens. The zoom and focus move to their predetermined positions then stop. The zoom and focus start and stop simultaneously. (During this operation, the shot recalling speed can be changed by means of the zoom maximum speed control knob.
An important point after buying a device DigiPower ENG Lenses (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DigiPower ENG Lenses yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DigiPower ENG Lenses - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DigiPower ENG Lenses you will learn all the available features of the product, as well as information on its operation. The information that you get DigiPower ENG Lenses will certainly help you make a decision on the purchase.
If you already are a holder of DigiPower ENG Lenses, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DigiPower ENG Lenses.
However, one of the most important roles played by the user manual is to help in solving problems with DigiPower ENG Lenses. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DigiPower ENG Lenses along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
