Instruction/ maintenance manual of the product DIGICAM ES3310 Digicom
Go to page of 35
.
i Contents Section 1 Getting to Know Y our Digit al Camera .................. 1 Overview............................................................................................ 1 Front V iew ........................................................
ii Section 4 Playback Mode .................................................... 21 Direction Button Functions ............................................................... 21 LCD Monitor Information...................................................
1 Section 1 Getting to Know Your Digital Camera Ϫ Ov er view Your new digital camera delivers high quality images at up to 2976x2232 resoluti on as well as short movie clips using a 3.2-Megapixel CMOS sensor. With the optical viewfinder and built-in 1.
2 Ϫ R ear Vi ew Ö The mode button ( ) is used to switch betwe en the two main operation mod es. Turn to section 3, Camera Mode , and section 4, Play back Mode , for full details Ö The direction button ( ) is used in Camera Mode for general setti ng, and in the Playback Mode to navigate through me nus.
3 Ö For information on fitting batteries, turn to Loading the Battery in section 2. Ö To learn how to install a memory card, turn to Inserting an Optional SD Card in section 2.
4 Section 2 Getting Up and Running Getting Up and Running Getting Up and Running Getting Up and Running Ϫ Loading the Batteries You must load 2 AA size alkaline batteries before the camera can be use d: 1. Press down and hold the release button, and slide the battery/SD Card cover in the direction of the arrow to release the cover.
5 Note A memory card that has previou sly been used in another device may ha ve to be fo rm atted before it ca n be used. Turn to Formatting a Memory Card in section 3 for details. Note When a memory card is fitted, im ages and m ovie clip s are saved on the card rather than on the built-in memory.
6 Ϫ T ur ning the Camera On and Getting Star ted To turn on once the batteries are loaded: 1. Open the lens cover first, and then press down and hold the power button for ONE second. 2. When the camera is turned on, the GREEN LED underne ath the direction button will light up.
7 Section 3 Camera Mode Ϫ Directio n Button Functions The Camera Mode is for taking photo s and short movi es. In this mode, the direction button has the following functions: Right button : LCD monit.
8 Ϫ T aking Photos Once your camera is turne d on, you can compose pictures u sing the viewfinder or the LCD monitor. Using the viewfinder will save battery power. You may find it easier to compose your pictures with the LCD monitor however. Close-up shots in particular will be more accurate if composed through the LCD monitor.
9 Ϫ T aking Mo vies Taking short movies is simple with your camera. Simply set your camera to Mov ie Mode, frame your picture using the viewfinder or LCD monitor an d press the shutter button to start recording. When a movie is recording, the RED LED un derneath the direction button will remain lit and a time indicator will display on LCD monitor.
10 Ϫ Using the Self-Timer The self-timer allows you to take photos with a 10-se cond time delay so that you can join the scene in the photo. Note Before taking a self-timer photo, en sure the camera is placed se curely such as on a level surface or a tripod.
11 Up Button Enter Button Right Button Left Button Down Button Up Button Enter Button Right Button Left Button Down Button Ϫ Camera Mode Settings Camera Mode Settings are used to change shooting mode, resolution, flash setting, LCD brightness and advanced settings.
12 The following table summarize s the choices available in the Camera Mode Optio ns Men u: Submenu Display Options Shooting Mode Single Photo Mode (default setting) Movie Mode Continuous Shooting Mod.
13 Ϫ T aking Photos Continuousl y With the camera set to Multisnap Mode, you can take up to FIVE photos. To enter Multisnap Mode, use the direction b utton to select the multisnap icon ( ) and press the enter button. Ϫ Changing Resolution Your camera gives you the optio n of taking photos at different re solutions.
14 Ϫ Using the Flash Your camera has two flash settings: Ö Auto-flash : the flash fires automatically according to lighting conditions. Use this mode for general photogra phy Ö Flash Off : the flash won’t fire under any circumstance s.
15 Ϫ Advanced Settings The Advanced Settings submenu co ntains options for configuring your camera set up and more advanced options to improve the quality of your photos. You can set the following options by press the direction button and then e nter button.
16 Format Card ŏ Y es ŏ No (default) Language ŏ English (default) ŏ German ŏ French ŏ Italian ŏ Span is h ŏ Portuguese Exit Select to exit Advanced Settings and Camera Mode Options menus. Adjusting Exposure Your camera adjusts image exposure automatically depending on lighting co nditions.
17 Adjusting White Balance Your camera adjusts the color balan ce of images automatically depending on lighting conditions. You can override the automatic setting if you wish. Four white balance settings are available: Ö Automatic: The camera automatically adjust s white balance.
18 Quick Review Settings Quick Review allows you to have a look at your photos after you have taken them. With Quick Review on, images are displayed for TWO seconds on th e LCD monitor immediately after they are taken.
19 Sound Settings You can enable sound effects to signal power on and off, and taking of photos and movie clips. Ö ON : Enable audio effects Ö OFF : Disable audio effects Formatting a Memory Card This camera only supports memory card s with the FAT16 format.
20 Selecting Interface Language You can change the interface language. The following languages are available: Ö English Ö German Ö French Ö It alian Ö Spani sh Ö Portuguese.
21 Up But ton Enter Button Right Button Left Button Down Button Up But ton Enter Button Right Button Left Button Down Button Section 4 Playback Mode Ϫ Directio n Button Functions The Playback Mode is for viewing and m anagi ng photos and movie clips store d on the built-in memory or on an optional memory card.
22 Showing a image with DPOF setting Showing image resolution Ϫ Displaying Single & Thum bnail Imag es In Playback Mode, stored photos can be viewed ONE at a time or as NINE thumbnail images. Displaying Single Images The default setting for viewing stored images is a s single images ( ).
23 Ϫ Making Slide Shows You can set your camera to display images one after another in turn. To start a slide show: 1. When in Playback Mode, press the Enter button to open the Options Menu ap pears. The Display Mode submenu is the first item. 2. Use the Up or Down direction key to hig hlight the Slideshow icon ( ).
24 Deleting Images and Movie Clips To delete images and/or movie clips: 1. In Playback Mode, locate the image or movie clip you want to delete. 2. When the image (or first frame of movie clip) is displayed, press Enter. 3. Open the Deletion Menu ( ). 4.
25 Ϫ Using DPOF Settings DPOF (Digital Print Order Format) make s printing your photos extremely si mple. You only have to select which phot os you want to have printed usi ng the DPOF submenu and then insert your card into a compatible print er (or give the card to a printing servi ce) to print the selected images out.
26 Section 5 Viewing Photos and Movie Clips on a TV Ϫ Connecting the Camer a to a T ele vision You can view stored images and movie clip s on a tele vision. To connect to a television: 1. Connect one end of the movie cable to your camera’s TV Out port.
27 Section 6 Transferring Data to a Computer You can transfer images a nd movie clips stored on your came ra to a computer and send th e m in emails to friends or post them on websites. To do this you should: 1. Install the digital camera dri ver on your computer 2.
28 Ϫ Connecting Y our Camera to a Computer Your camera connects to a compute r through a USB cabl e such as that provided in the camera package. 1. Connect the computer a nd camera with the suppli ed USB cable. 2. Press the PC Mode/Movie button to switch between Mass S torage Mode and PC Camera Mode.
29 Ϫ Installing Bundled Software The CD-ROM supplied with your camera contains three pieces of software. Ö ArcSoft PhotoImpression 3 is a user-friendly appli cat ion that helps you retouch, edit and organize images. Ö ArcSoft VideoImpressi on 2.
30 Section 7 Troubleshooting Can’t turn the camera on The batteries may not be installed or may be incorrectly installed: Check the batteries, ensure they are ori ented correctly. The Battery / SD Card Cover may be open: Close the cover. The batteries may be out of power: Replace the b atteries.
31 Section 8 Specifications and System Requirements Ϫ Specifications Image Sensor 3.2 Mega-pixel CMOS Sensor Operating modes Digital Camera, PC Came ra, Movie Clips Lens f=9.
32 Ϫ System R equir em ents Windows 98SE/2000/ME/XP Pentium MMX, Celeron or AMD Athlon® CPU 64MB RAM CD-ROM drive 500MB free HDD space Available US B port 16-bit Color Display.
An important point after buying a device Digicom DIGICAM ES3310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Digicom DIGICAM ES3310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Digicom DIGICAM ES3310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Digicom DIGICAM ES3310 you will learn all the available features of the product, as well as information on its operation. The information that you get Digicom DIGICAM ES3310 will certainly help you make a decision on the purchase.
If you already are a holder of Digicom DIGICAM ES3310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Digicom DIGICAM ES3310.
However, one of the most important roles played by the user manual is to help in solving problems with Digicom DIGICAM ES3310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Digicom DIGICAM ES3310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
