Instruction/ maintenance manual of the product MIL-4711H Digi
Go to page of 9
Doc. Number: 75425 Rev. A MIL-4711H Manageable Hub User’ s Guide This guide includes the following information: “Description of Hardwar e” on page 2 “Description of the LEDs” on page 3 “De.
Install Guide Model: MIL-4711H 2 Micro Modules used with the MIL-4711H: • MIL-4310M • MIL-4320M • MIL-4330M • MIL-4340M • MIL-4350M • MIL-4360M • MIL-4370M For instructions on configuring the micr o modules, see the MIL-4300M Series Micro Module Installation Guide .
Install Guide Model: MIL-4711H 3 Figure 3.MIL-4711 (Rear View w/ the MIL-4310 Module) Description of the LEDs On the front panel of the MIL-471 1H, ther e is one LED above each of the eight, 10BASE-T ports.
Install Guide Model: MIL-4711H 4 The DB-9 Serial P ort Figure 4.RS-232C Serial Port Pin Assignments Note: N/C=No Connect Installation Procedure Follow these steps to connect the MIL-471 1H to your network: 1. Remove the MIL-4700H, power adapter , and cor d from its shipping box.
Install Guide Model: MIL-4711H 5 Assigning an IP Address Every device on a TCP/IP network is identified by two addr esses: • The address is a 6-byte addr ess assigned to the 471 1H by the manufacturer . • The IP addr ess is a 4-byte address assigned by the system admin.
Install Guide Model: MIL-4711H 6 7. If prompted with a message like W arning: Entering monitor will lock out other Ethernet access and force reset , type [Y] to get the command prompt. 8. T ype [N] to enter the network protocols menu. 9. T ype [T] to enter the TCP/IP menu.
Install Guide Model: MIL-4711H 7 6. V erify that the RARP daemon is running: ps-ax | grep RARP (for BSD UNIX) or ps-ef | grep RARP (for System V UNIX) Otherwise, start the RARP daemon by typing: /usr/etc/rarpd-a or /etc/rarpd-a If successful, the SYS LED flashes five times per second until the 471 1H resolves its IP addr ess.
Install Guide Model: MIL-4711H 8 2. Use a text editor to open the /etc/hosts file and add the following line: 192.185.2.3 alpha 3. Use the following menu sequence in sam: Networking--> Communications--> Device Connectivity--> Boot Protocol--> Actions--> Add 4.
Doc. Number: 75425 Rev. A Legal Regulatory App rova ls • FCC Class A • UL 1950 • CSA 22 No. 950 • EN60950 • CE – EN55022 Class B – EN50082-1 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interfer ence-Causing Equipment Regulations.
An important point after buying a device Digi MIL-4711H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Digi MIL-4711H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Digi MIL-4711H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Digi MIL-4711H you will learn all the available features of the product, as well as information on its operation. The information that you get Digi MIL-4711H will certainly help you make a decision on the purchase.
If you already are a holder of Digi MIL-4711H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Digi MIL-4711H.
However, one of the most important roles played by the user manual is to help in solving problems with Digi MIL-4711H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Digi MIL-4711H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
