Instruction/ maintenance manual of the product MIL-190C Digi
Go to page of 4
Doc #: 90000072 Rev. A MIL-190C F ast•T wist F ast Ethernet Con ver ter Single-mode Fiber Installation Guide This guide includes the following information: “Introduction” on page 2 “Installati.
Install Guide Model: MIL-190 2 Introduction The MIL-190C supports Fast Ethernet in both half- and full-duplex mode. For network budget constraint, the MIL-190C uses 150 nanoseconds (approximately 30 meters of cable) during conversion in each direction.
Install Guide Model: MIL-190 3 Configuration The MIL-190 is configured to support auto-negotiation between half- and full- duplex modes. Jumper JP1 is configured with pins 2-3 “jumper ed,” which allows auto-negotiation between these two modes.
Doc #: 90000072 Rev. A Legal Regulatory App rova ls • FCC Class A • UL 1950 • CSA 22 No. 950 • EN60950 • CE – EN55022 Class B – EN50082-1 Canadian EMI Notice This Class A digital apparatus meets all the requir ements of the Canadian Interference-Causing Equipment Regulations.
An important point after buying a device Digi MIL-190C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Digi MIL-190C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Digi MIL-190C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Digi MIL-190C you will learn all the available features of the product, as well as information on its operation. The information that you get Digi MIL-190C will certainly help you make a decision on the purchase.
If you already are a holder of Digi MIL-190C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Digi MIL-190C.
However, one of the most important roles played by the user manual is to help in solving problems with Digi MIL-190C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Digi MIL-190C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
