Instruction/ maintenance manual of the product R30ST Diamond Power Products
Go to page of 10
1 Owner's Manual Models R30NT & R30ST Advanced T ranspor tation Pr oducts, Inc. 400 T erry A ve. N Seattle, W A 98109 (206) 467-0231 fax: 467-0175 A TPV ision@AOL.com — http://Cyclery .com/V ision 20 The Advanced T ranspor tation Pr oducts Inc.
2 T able of Contents Chapter 1: Read me First! ................................................................... 3 Anatomy of a Metro .............................................................................. 4 Chapter 2: Assembly and Setup ....
3 Chapter 1: Read me First! Open Close here with 20 - 45 lbs force Rotate here to tighten/loosen Skewer Handle Skewer Nut Wheel / Seat Skewer Operation Closed Thank you for choosing a V ision™ Recumbent! W e here at Advanced T ransportation Products have tried to build for you the most advanced, full featured recumbent available.
4 Anatomy of a Seat Quick Release Skewers Elastomer Swing arm lock point Seat Serial Number Seat T rack Rear dropouts Swingarm Elastomer Clamp Wingnut 17 the bars in a light but firm manner . Let your shoulders droop, relax your neck, don’t “death-clench” your teeth.
5 Front Fork Brake Lever Metro Shifter Handlebar Stem Crank & Chainrings MainFrame Headtube 16 release the brake, and push forward firmly on the pedal.
6 Check your bike carefully before each ride * The wheels should be straight and not wobble. *Squeeze each brake lever to make sure there is no binding and the brake pads press hard enough on the rims to stop the bike. The brake pads should be ad- justed so they are 1/16" (2mm) away from the rim when not applied.
7 Housing F F F F F r r r r r ont Brake ont Brake ont Brake ont Brake ont Brake Handlebar Steerer T ube Cable Chapter 2: Assembly and Setup Y our V ision™ Recumbent dealer should have put your bike together and set the adjust- ments for you.
8 section. Now insert the front brake cable housing ends into the cable stops on the handlebar . The handlebar stem is at the top of the handlebar . The 6mm bolt at the top of the main handlebar tube can be loosened to allow the stem to move up or down, allowing you to set the bars for a comfortable height for you.
9 before each ride for abrasions, tears and tightness. T o install the seat on your Metro, first make sure both quick release skewers are open. Slide the seat rails onto the main frame track from the front. Slide the seat to the middle of the track and tighten the quick release skewers as shown in Chapter 1.
10 Adjuster Sleeve Pull Rod Sachs Hub Adjustments Axle Nut Nexus 7 speed Hub - VR30N This is an internal 7 speed system built by Shimano. It provides a simple to operate, relatively wide range of gears. W e are using the thumb control for the Nexus. T o shift gears simply flick the lever with your thumb.
An important point after buying a device Diamond Power Products R30ST (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Diamond Power Products R30ST yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Diamond Power Products R30ST - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Diamond Power Products R30ST you will learn all the available features of the product, as well as information on its operation. The information that you get Diamond Power Products R30ST will certainly help you make a decision on the purchase.
If you already are a holder of Diamond Power Products R30ST, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Diamond Power Products R30ST.
However, one of the most important roles played by the user manual is to help in solving problems with Diamond Power Products R30ST. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Diamond Power Products R30ST along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
