Instruction/ maintenance manual of the product Chassis RM21400 deXlan
Go to page of 17
RM21400 Chassis Installation Reference Guide Chenbro Micom CO., LTD. 15Fl., No. 150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan, R.O.C. Tel: +886-2-8226-5500 www.
Copyright This document is copyrighted, 2002, by Chenbro Micom Co., Ltd. and all rights are reserved. Chenbro Micom Co., Lt d. reserves the right to make improvements to the products described in this document at any time without prior notice. Specifications are t hus subject to change without notice.
T able of Content s Chapter 1 General Informa tion......................................................................... 4 1.1 S pecific ation ........................................................................................ 4 1.2 Feat ures.
Chapter 1 General Information 1.1 Specification Model Name RM214 S tandard EIA-RS310D M/B Form Factor A TX/Extended A TX CPU Support DP Xeon/AMD Athlon Dimension (D x W x H) 610mm x 430mm x 88.
- Compliance with Dual Intel Xeon or Dual AMD MP Server boards V alidated Thermal Solution - Optional 4cm fan on rear panel for pulling out heated air efficiently.
Chapter 2 SCSI Backplane Installation 2.1 Remove the top cover 1 Remove three screws on top cover . 2 Push top cover backward and life off the top cover . 3 2.2 Remove the fan bracket 1 Remove two screws on left & right side of fan bracket. 2 Lift of f the fan bracket from chassis.
2.3 Remove the HDD drawer 1 Push the blue door lock to right -hand side; the handle will be release automatically . 2 1 Chenbro Micom CO., LTD. 15Fl., No. 150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan, R.O.C. Tel: +886-2-8226-5500 www.chenbro.
2 1 3 Repeat the same operation for the other 5 drawers. 4 Rear view of HDD trays. 2.4 Install the SCSI backplane assembly 1. Insert the SCSI backpl ane assembly into chassis. Chenbro Micom CO., LTD. 15Fl., No. 150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan, R.
2. Check whether the SCSI bracke t assembly is installed properly . Chenbro Micom CO., LTD. 15Fl., No. 150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan, R.
3. Fasten the screws to fix the SCSI backplane assembly . 4. Push the HDD drawers back to drive trays. Chenbro Micom CO., LTD. 15Fl., No. 150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan, R.
2.5 Connect LED and switch wires There is one 2 x 9 pin connector on left-bottom side on SC SI backplane. This connector provides several LED and switch connections for devices.
4. Check the pin number of “Fail LED” connector . Pin 1 Device 1 Power LED - Pin 2 Device 1 Power LED + Pin 3 Device 1 Access LED + Pin 4 Device 1 Access LED - Pin 5 Device 2 Power LED - Pin 6 Dev.
7. Check the pin numbers of HDD LED connectors. Pin 1 Device 1 Power LED - Pin 2 Device 1 Power LED + Pin 3 Device 1 Access LED + Pin 4 Device 1 Access LED - Pin 5 Device 2 Power LED - Pin 6 Device 2 .
9. Plug the LED with red wire to the lowest LED len. 10. Plug the green LED with green wire to the second lowest LED len. Chenbro Micom CO., LTD. 15Fl., No. 150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan, R.O.C. Tel: +886-2-8226-5500 www.chenbro.
11. Repeat step 9 & 10 till all LED are installed properly . 12. Use the same way to install t he LED on another SCSI backplane. T ill now , the installation of LED is completed. 13. Plug the power connectors to SCSI backplane. Chenbro Micom CO., LTD.
14. Plug the power connectors for another SCSI backplane. 15. Attach the SCSI cable to the unused SCSI connector . 2.6 Reattach the fan bracket and top cover 1. Plug two of the fan power c onnectors on fan bracket onto SCSI backplane. The lef t fan connecto r should be connected to M/B.
2. Reattach the fan bracket and arrange the cables properly . 3. Fasten the screws that ar e detached in section 2.2. 4. Put the top cover back and fasten the screws. Please check section 2.1 for detail locations of screws. The installation of SCSI backplane is finished now .
An important point after buying a device deXlan Chassis RM21400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought deXlan Chassis RM21400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data deXlan Chassis RM21400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, deXlan Chassis RM21400 you will learn all the available features of the product, as well as information on its operation. The information that you get deXlan Chassis RM21400 will certainly help you make a decision on the purchase.
If you already are a holder of deXlan Chassis RM21400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime deXlan Chassis RM21400.
However, one of the most important roles played by the user manual is to help in solving problems with deXlan Chassis RM21400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device deXlan Chassis RM21400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
