Instruction/ maintenance manual of the product APSUSB2 Airlinkplus
Go to page of 13
About This Guide i Fast Ethernet Print Server 2 Parallel, 1 USB Hardware User’s Guide Rev. 0 1 ( Octob er, 200 2 ).
ii About This Guide Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vo r jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig - oder Aerosolreiniger.
About This Guide iii Trademarks Copyright 2000 Contents subject to change without prior notice. All trademarks belong to their respective proprietors.
iv About This Guide Network Cable Connector ...................................................................... 9 DC Power Connector ............................................................................ 10 LED Indicators ....................
1 1 I NTRODUCTION The Print Server is a compact print server which connects to your Ethernet or Fast Ethernet network anywhere you wish to locate printer services.
NetWare 5.x NDPS LPR Remote Printing ♦ NetBEUI Windows NT/2000 /XP , Windows 95/98/Me, Windows for Workgroups, Microsoft LAN Manager, IBM LAN Server ♦ AppleTalk MacOS EtherTalk Windows - based setup and admin i stration software, PS Admin , is supplied with the Print Server, making configuration and management quick and easy.
Network Cable Connector The Print Server’s rear panel features an RJ - 45 conn ector for connection to 10Base - T Ethernet cabling or 100Base - TX Fast Ethernet cabling (which should be Category 5 twisted - pair cable).
2 2 U NPACKING AND I NSTALLATION This chapter explains how to install your Print Server and connect it to the network. It also describes the print server self test indications. Unpacking and Inspecting the Print Server Carefully remove all items from the package.
Installing the Print Server WARNING: Configuration problems may result if the Print Server is powered up without firs t establishing its network connection. Follow this procedure to avoid complications at the configuration stage. 1. Confirm proper operation of each of the printers to be co n nected to the Print Server.
The actual component tests immediately follow the LED tests. A normal (no fault) result is signaled by a simultaneous flashing of the se three LEDs, followed by a quiescent state with all three LEDs dark.
A 3 P RODUCT S PECIFICATIONS Printer Connection Standards : IEEE 1284 bi - directional parallel interface USB 1.1 Ports: Bi - directional 25 - pin parallel ports × 2, USB port × 1 Parallel Port Bi - directional Communication: Hewlett - Packard PJL (Printer Job Language) supported Network Connection Network Standards : IEE E 802.
Networ k Protocols Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto - switching) Transport Protocols: TCP/IP, NetBEUI, AppleTalk/EtherTalk TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, T.
B 4 P ORT P INOUTS This appendix shows the pinouts of the Print Server parallel port connector. Parallel Ports The following t able lists the pinouts of the print server’s 25 - pin parallel port connector (identical to the connector used on most personal computers), as well as the 36 - pin Centronics connector used on most printers.
An important point after buying a device Airlinkplus APSUSB2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlinkplus APSUSB2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlinkplus APSUSB2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlinkplus APSUSB2 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlinkplus APSUSB2 will certainly help you make a decision on the purchase.
If you already are a holder of Airlinkplus APSUSB2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlinkplus APSUSB2.
However, one of the most important roles played by the user manual is to help in solving problems with Airlinkplus APSUSB2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlinkplus APSUSB2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
